* [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA
@ 2020-09-10 10:53 Michal Simek
2020-09-17 1:09 ` Simon Glass
2020-09-23 12:27 ` Michal Simek
0 siblings, 2 replies; 3+ messages in thread
From: Michal Simek @ 2020-09-10 10:53 UTC (permalink / raw
To: u-boot
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
and zynqmp.c to simplify if/endif logic in zynqmp.c.
This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.
And removing one line from Topic Miami boards which is not needed because
symbol is not enabled via Kconfig.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
arch/arm/mach-zynq/cpu.c | 6 ++----
arch/arm/mach-zynq/spl.c | 2 +-
board/xilinx/zynqmp/zynqmp.c | 10 +++-------
common/spl/Kconfig | 2 +-
common/spl/spl_fit.c | 4 ++--
configs/socfpga_arria10_defconfig | 2 +-
configs/xilinx_zynq_virt_defconfig | 2 +-
drivers/Makefile | 3 +--
include/configs/topic_miami.h | 1 -
9 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
index 77b7cb130712..3befc120289c 100644
--- a/arch/arm/mach-zynq/cpu.c
+++ b/arch/arm/mach-zynq/cpu.c
@@ -17,8 +17,7 @@
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
-#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
- (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+#if CONFIG_IS_ENABLED(FPGA)
xilinx_desc fpga = {
.family = xilinx_zynq,
.iface = devcfg,
@@ -111,8 +110,7 @@ static int __maybe_unused cpu_desc_id(void)
#if defined(CONFIG_ARCH_EARLY_INIT_R)
int arch_early_init_r(void)
{
-#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
- (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+#if CONFIG_IS_ENABLED(FPGA)
int cpu_id = cpu_desc_id();
if (cpu_id < 0)
diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c
index 239ce3436a62..cb8cfd2f3537 100644
--- a/arch/arm/mach-zynq/spl.c
+++ b/arch/arm/mach-zynq/spl.c
@@ -34,7 +34,7 @@ void board_init_f(ulong dummy)
void spl_board_init(void)
{
preloader_console_init();
-#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA_SUPPORT)
+#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA)
arch_early_init_r();
#endif
board_init();
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index b4e7301d5094..c940dd49ede0 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -40,8 +40,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
- !defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
static const struct {
@@ -206,8 +205,7 @@ static const struct {
~BIT(ZYNQMP_IPDIS_VCU_BIT)
#define MAX_VARIANTS_EV 3
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
- !defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
static char *zynqmp_get_silicon_idcode_name(void)
{
u32 i, id, ver, j;
@@ -342,9 +340,7 @@ int board_init(void)
/* Bug in ROM sets wrong value in this register */
writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG);
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
- !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
- defined(CONFIG_SPL_BUILD))
+#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
zynqmppl.name = zynqmp_get_silicon_idcode_name();
printf("Chip ID:\t%s\n", zynqmppl.name);
fpga_init();
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index a7fabda969d4..807b1dc05937 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -602,7 +602,7 @@ config SPL_FAT_WRITE
Support for the underlying block device (e.g. MMC or USB) must be
enabled separately.
-config SPL_FPGA_SUPPORT
+config SPL_FPGA
bool "Support FPGAs"
help
Enable support for FPGAs in SPL. Field-programmable Gate Arrays
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index b69b3948841f..363602a439cd 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -253,7 +253,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
const void *data;
bool external_data = false;
- if (IS_ENABLED(CONFIG_SPL_FPGA_SUPPORT) ||
+ if (IS_ENABLED(CONFIG_SPL_FPGA) ||
(IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP))) {
if (fit_image_get_type(fit, node, &type))
puts("Cannot get image type.\n");
@@ -547,7 +547,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
return -1;
}
-#ifdef CONFIG_SPL_FPGA_SUPPORT
+#ifdef CONFIG_SPL_FPGA
node = spl_fit_get_image_node(fit, images, "fpga", 0);
if (node >= 0) {
/* Load the image and set up the spl_image structure */
diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
index 8fdd21c0d37d..5d6fe4f35abf 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -23,7 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
CONFIG_VERSION_VARIABLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_FPGA_SUPPORT=y
+CONFIG_SPL_FPGA=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index 8acdab25b70c..b12794529700 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -20,7 +20,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
-CONFIG_SPL_FPGA_SUPPORT=y
+CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
# CONFIG_BOOTM_NETBSD is not set
diff --git a/drivers/Makefile b/drivers/Makefile
index 33126b2da7bb..9eb51453e57a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
obj-$(CONFIG_$(SPL_)BOARD) += board/
obj-$(CONFIG_XEN) += xen/
+obj-$(CONFIG_$(SPL_)FPGA) += fpga/
ifndef CONFIG_TPL_BUILD
ifdef CONFIG_SPL_BUILD
@@ -60,7 +61,6 @@ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
-obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
obj-$(CONFIG_SPL_THERMAL) += thermal/
endif
@@ -85,7 +85,6 @@ obj-y += cache/
obj-$(CONFIG_CPU) += cpu/
obj-y += crypto/
obj-$(CONFIG_FASTBOOT) += fastboot/
-obj-$(CONFIG_FPGA) += fpga/
obj-y += misc/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_NVME) += nvme/
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index 6e3953835d15..010d28ac86f7 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -24,7 +24,6 @@
/* No falcon support */
#undef CONFIG_SPL_OS_BOOT
-#undef CONFIG_SPL_FPGA_SUPPORT
/* FPGA commands that we don't use */
--
2.28.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA
2020-09-10 10:53 [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA Michal Simek
@ 2020-09-17 1:09 ` Simon Glass
2020-09-23 12:27 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Simon Glass @ 2020-09-17 1:09 UTC (permalink / raw
To: u-boot
On Thu, 10 Sep 2020 at 04:53, Michal Simek <michal.simek@xilinx.com> wrote:
>
> The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
> and zynqmp.c to simplify if/endif logic in zynqmp.c.
>
> This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
> obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.
>
> And removing one line from Topic Miami boards which is not needed because
> symbol is not enabled via Kconfig.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/mach-zynq/cpu.c | 6 ++----
> arch/arm/mach-zynq/spl.c | 2 +-
> board/xilinx/zynqmp/zynqmp.c | 10 +++-------
> common/spl/Kconfig | 2 +-
> common/spl/spl_fit.c | 4 ++--
> configs/socfpga_arria10_defconfig | 2 +-
> configs/xilinx_zynq_virt_defconfig | 2 +-
> drivers/Makefile | 3 +--
> include/configs/topic_miami.h | 1 -
> 9 files changed, 12 insertions(+), 20 deletions(-)
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA
2020-09-10 10:53 [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA Michal Simek
2020-09-17 1:09 ` Simon Glass
@ 2020-09-23 12:27 ` Michal Simek
1 sibling, 0 replies; 3+ messages in thread
From: Michal Simek @ 2020-09-23 12:27 UTC (permalink / raw
To: u-boot
?t 10. 9. 2020 v 12:53 odes?latel Michal Simek <michal.simek@xilinx.com> napsal:
>
> The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
> and zynqmp.c to simplify if/endif logic in zynqmp.c.
>
> This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
> obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.
>
> And removing one line from Topic Miami boards which is not needed because
> symbol is not enabled via Kconfig.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
>
> arch/arm/mach-zynq/cpu.c | 6 ++----
> arch/arm/mach-zynq/spl.c | 2 +-
> board/xilinx/zynqmp/zynqmp.c | 10 +++-------
> common/spl/Kconfig | 2 +-
> common/spl/spl_fit.c | 4 ++--
> configs/socfpga_arria10_defconfig | 2 +-
> configs/xilinx_zynq_virt_defconfig | 2 +-
> drivers/Makefile | 3 +--
> include/configs/topic_miami.h | 1 -
> 9 files changed, 12 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
> index 77b7cb130712..3befc120289c 100644
> --- a/arch/arm/mach-zynq/cpu.c
> +++ b/arch/arm/mach-zynq/cpu.c
> @@ -17,8 +17,7 @@
> #define ZYNQ_SILICON_VER_MASK 0xF0000000
> #define ZYNQ_SILICON_VER_SHIFT 28
>
> -#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
> - (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
> +#if CONFIG_IS_ENABLED(FPGA)
> xilinx_desc fpga = {
> .family = xilinx_zynq,
> .iface = devcfg,
> @@ -111,8 +110,7 @@ static int __maybe_unused cpu_desc_id(void)
> #if defined(CONFIG_ARCH_EARLY_INIT_R)
> int arch_early_init_r(void)
> {
> -#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
> - (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
> +#if CONFIG_IS_ENABLED(FPGA)
> int cpu_id = cpu_desc_id();
>
> if (cpu_id < 0)
> diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c
> index 239ce3436a62..cb8cfd2f3537 100644
> --- a/arch/arm/mach-zynq/spl.c
> +++ b/arch/arm/mach-zynq/spl.c
> @@ -34,7 +34,7 @@ void board_init_f(ulong dummy)
> void spl_board_init(void)
> {
> preloader_console_init();
> -#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA_SUPPORT)
> +#if defined(CONFIG_ARCH_EARLY_INIT_R) && defined(CONFIG_SPL_FPGA)
> arch_early_init_r();
> #endif
> board_init();
> diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> index b4e7301d5094..c940dd49ede0 100644
> --- a/board/xilinx/zynqmp/zynqmp.c
> +++ b/board/xilinx/zynqmp/zynqmp.c
> @@ -40,8 +40,7 @@
>
> DECLARE_GLOBAL_DATA_PTR;
>
> -#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
> - !defined(CONFIG_SPL_BUILD)
> +#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
> static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
>
> static const struct {
> @@ -206,8 +205,7 @@ static const struct {
> ~BIT(ZYNQMP_IPDIS_VCU_BIT)
> #define MAX_VARIANTS_EV 3
>
> -#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
> - !defined(CONFIG_SPL_BUILD)
> +#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
> static char *zynqmp_get_silicon_idcode_name(void)
> {
> u32 i, id, ver, j;
> @@ -342,9 +340,7 @@ int board_init(void)
> /* Bug in ROM sets wrong value in this register */
> writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG);
>
> -#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
> - !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
> - defined(CONFIG_SPL_BUILD))
> +#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
> zynqmppl.name = zynqmp_get_silicon_idcode_name();
> printf("Chip ID:\t%s\n", zynqmppl.name);
> fpga_init();
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index a7fabda969d4..807b1dc05937 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -602,7 +602,7 @@ config SPL_FAT_WRITE
> Support for the underlying block device (e.g. MMC or USB) must be
> enabled separately.
>
> -config SPL_FPGA_SUPPORT
> +config SPL_FPGA
> bool "Support FPGAs"
> help
> Enable support for FPGAs in SPL. Field-programmable Gate Arrays
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index b69b3948841f..363602a439cd 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -253,7 +253,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
> const void *data;
> bool external_data = false;
>
> - if (IS_ENABLED(CONFIG_SPL_FPGA_SUPPORT) ||
> + if (IS_ENABLED(CONFIG_SPL_FPGA) ||
> (IS_ENABLED(CONFIG_SPL_OS_BOOT) && IS_ENABLED(CONFIG_SPL_GZIP))) {
> if (fit_image_get_type(fit, node, &type))
> puts("Cannot get image type.\n");
> @@ -547,7 +547,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
> return -1;
> }
>
> -#ifdef CONFIG_SPL_FPGA_SUPPORT
> +#ifdef CONFIG_SPL_FPGA
> node = spl_fit_get_image_node(fit, images, "fpga", 0);
> if (node >= 0) {
> /* Load the image and set up the spl_image structure */
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index 8fdd21c0d37d..5d6fe4f35abf 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -23,7 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
> CONFIG_VERSION_VARIABLE=y
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> CONFIG_SPL_ENV_SUPPORT=y
> -CONFIG_SPL_FPGA_SUPPORT=y
> +CONFIG_SPL_FPGA=y
> CONFIG_CMD_ASKENV=y
> CONFIG_CMD_GREPENV=y
> # CONFIG_CMD_FLASH is not set
> diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
> index 8acdab25b70c..b12794529700 100644
> --- a/configs/xilinx_zynq_virt_defconfig
> +++ b/configs/xilinx_zynq_virt_defconfig
> @@ -20,7 +20,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
> CONFIG_LEGACY_IMAGE_FORMAT=y
> CONFIG_USE_PREBOOT=y
> CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_FPGA_SUPPORT=y
> +CONFIG_SPL_FPGA=y
> CONFIG_SPL_OS_BOOT=y
> CONFIG_SPL_SPI_LOAD=y
> # CONFIG_BOOTM_NETBSD is not set
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 33126b2da7bb..9eb51453e57a 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -30,6 +30,7 @@ obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
> obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
> obj-$(CONFIG_$(SPL_)BOARD) += board/
> obj-$(CONFIG_XEN) += xen/
> +obj-$(CONFIG_$(SPL_)FPGA) += fpga/
>
> ifndef CONFIG_TPL_BUILD
> ifdef CONFIG_SPL_BUILD
> @@ -60,7 +61,6 @@ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
> obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
> obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
> obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
> -obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
> obj-$(CONFIG_SPL_THERMAL) += thermal/
>
> endif
> @@ -85,7 +85,6 @@ obj-y += cache/
> obj-$(CONFIG_CPU) += cpu/
> obj-y += crypto/
> obj-$(CONFIG_FASTBOOT) += fastboot/
> -obj-$(CONFIG_FPGA) += fpga/
> obj-y += misc/
> obj-$(CONFIG_MMC) += mmc/
> obj-$(CONFIG_NVME) += nvme/
> diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
> index 6e3953835d15..010d28ac86f7 100644
> --- a/include/configs/topic_miami.h
> +++ b/include/configs/topic_miami.h
> @@ -24,7 +24,6 @@
>
> /* No falcon support */
> #undef CONFIG_SPL_OS_BOOT
> -#undef CONFIG_SPL_FPGA_SUPPORT
>
> /* FPGA commands that we don't use */
>
> --
> 2.28.0
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-09-23 12:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-09-10 10:53 [PATCH] fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA Michal Simek
2020-09-17 1:09 ` Simon Glass
2020-09-23 12:27 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.