* [NXP-IMX] please pull nxp-imx-2021-1-16
@ 2021-01-16 7:18 Peng Fan
2021-01-16 13:47 ` Stefano Babic
2021-01-19 19:45 ` Tom Rini
0 siblings, 2 replies; 7+ messages in thread
From: Peng Fan @ 2021-01-16 7:18 UTC (permalink / raw
To: u-boot
Hi Stefano,
Please pull nxp-imx-2021-1-16
---------------------------------------
nandbcb update/fix
sync i.MX8M dts from Linux kernel
add i.MX8MN LPDDR4 evk board
eth support for i.MX8MP evk
ddr fix for i.MX8M
---------------------------------------
CI:
My github ci not work.
I run buildman local and not see failure.
Thanks,
Peng.
The following changes since commit 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
Merge tag 'efi-2021-01-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi (2020-12-29 10:23:58 -0500)
are available in the Git repository at:
https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-1-16
for you to fetch changes up to e02b2ca34b58131cb64b19887af007adb389f7bd:
imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44 +0800)
----------------------------------------------------------------
Han Xu (1):
nandbcb: nand support for i.MX8MP
Peng Fan (12):
imx: imx8mp_evk: enable eth support
imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
imx: imx8mn_evk: correct stack/malloc adress
arm: dts: imx8mn: sync dts from Linux Kernel
imx: imx8mn: add i.MX8MN LPDDR4 EVK support
imx8m: clock: add type of set_clk_eqos
arm: dts: imx8mp: sync dts from Linux Kernel
arm: dts: imx8mm: sync dts from Linux Kernel
arm: dts: imx8mq: sync dts from Linux Kernel
imx8m: lowlevel_init: tune alignment
imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
imx8m: add QSPI boot dev
Ye Li (9):
imx: ddr: imx8m: Move selfref_en after DDR scrub
nandbcb: Fix uninitialized variable
imx: nandbcb: Fix resource leak
imx: nandbcb: Fix resource leak in read_fcb
imx: nandbcb: Fix potential overflow in fill_dbbt_data
imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config
imx: Fix market segment fuse offset on iMX8MP
imx6: Remove AHCI device before boot OS
imx: timer: Modify GPT timer driver for mx7
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-evk.dts | 534 ++++++------------------------------------
arch/arm/dts/imx8mm-evk.dtsi | 489 ++++++++++++++++++++++++++++++++++++++
arch/arm/dts/imx8mm.dtsi | 53 ++++-
arch/arm/dts/imx8mn-ddr4-evk.dts | 321 ++++++++++---------------
arch/arm/dts/imx8mn-evk-u-boot.dtsi | 6 +
arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
arch/arm/dts/imx8mn-evk.dtsi | 360 ++++++++++++++++++++++++++++
arch/arm/dts/imx8mn-pinfunc.h | 1266 +++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
arch/arm/dts/imx8mn.dtsi | 411 +++++++++++++++++++++++++++-----
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +
arch/arm/dts/imx8mp-evk.dts | 117 +++++++++-
arch/arm/dts/imx8mp-pinfunc.h | 360 +++++++++-------------------
arch/arm/dts/imx8mp.dtsi | 234 +++++++++++++++++--
arch/arm/dts/imx8mq-evk.dts | 186 ++++++++++++---
arch/arm/dts/imx8mq-pinfunc.h | 623 ++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/imx8mq.dtsi | 302 ++++++++++++++++++++++--
arch/arm/include/asm/arch-imx8m/clock.h | 1 +
arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
arch/arm/mach-imx/cmd_nandbcb.c | 34 +--
arch/arm/mach-imx/cpu.c | 30 ++-
arch/arm/mach-imx/imx8m/Kconfig | 6 +
arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++
arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +-
arch/arm/mach-imx/spl.c | 2 +
arch/arm/mach-imx/timer.c | 16 +-
board/freescale/imx8mn_evk/Kconfig | 2 +-
board/freescale/imx8mn_evk/Makefile | 1 +
board/freescale/imx8mn_evk/lpddr4_timing.c | 1585 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mp_evk/imx8mp_evk.c | 65 +++++-
configs/imx8mn_ddr4_evk_defconfig | 2 +-
configs/imx8mn_evk_defconfig | 80 +++++++
configs/imx8mp_evk_defconfig | 9 +-
doc/board/freescale/imx8mn_evk.rst | 20 +-
drivers/ddr/imx/imx8m/ddr_init.c | 5 +-
drivers/power/power_i2c.c | 8 +-
include/configs/imx8mn_evk.h | 9 +-
include/configs/imx8mp_evk.h | 18 +-
include/dt-bindings/clock/imx8mn-clock.h | 30 ++-
include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++-
include/dt-bindings/clock/imx8mq-clock.h | 31 ++-
41 files changed, 5743 insertions(+), 1722 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mn-evk.dts
create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
create mode 100644 configs/imx8mn_evk_defconfig
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-16 7:18 [NXP-IMX] please pull nxp-imx-2021-1-16 Peng Fan
@ 2021-01-16 13:47 ` Stefano Babic
2021-01-18 1:40 ` Peng Fan
2021-01-19 19:45 ` Tom Rini
1 sibling, 1 reply; 7+ messages in thread
From: Stefano Babic @ 2021-01-16 13:47 UTC (permalink / raw
To: u-boot
Hi Peng,
On 16.01.21 08:18, Peng Fan wrote:
> Hi Stefano,
>
> Please pull nxp-imx-2021-1-16
> ---------------------------------------
> nandbcb update/fix
> sync i.MX8M dts from Linux kernel
> add i.MX8MN LPDDR4 evk board
> eth support for i.MX8MP evk
> ddr fix for i.MX8M
> ---------------------------------------
>
> CI:
> My github ci not work.
> I run buildman local and not see failure.
>
No problem, I will start the runner on gitlab before PR.
Regards,
Stefano
> Thanks,
> Peng.
>
>
> The following changes since commit 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
>
> Merge tag 'efi-2021-01-rc5-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi (2020-12-29 10:23:58 -0500)
>
> are available in the Git repository at:
>
> https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-1-16
>
> for you to fetch changes up to e02b2ca34b58131cb64b19887af007adb389f7bd:
>
> imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44 +0800)
>
> ----------------------------------------------------------------
> Han Xu (1):
> nandbcb: nand support for i.MX8MP
>
> Peng Fan (12):
> imx: imx8mp_evk: enable eth support
> imx: imx8mn_ddr4_evk: Use CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
> imx: imx8mn_evk: correct stack/malloc adress
> arm: dts: imx8mn: sync dts from Linux Kernel
> imx: imx8mn: add i.MX8MN LPDDR4 EVK support
> imx8m: clock: add type of set_clk_eqos
> arm: dts: imx8mp: sync dts from Linux Kernel
> arm: dts: imx8mm: sync dts from Linux Kernel
> arm: dts: imx8mq: sync dts from Linux Kernel
> imx8m: lowlevel_init: tune alignment
> imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
> imx8m: add QSPI boot dev
>
> Ye Li (9):
> imx: ddr: imx8m: Move selfref_en after DDR scrub
> nandbcb: Fix uninitialized variable
> imx: nandbcb: Fix resource leak
> imx: nandbcb: Fix resource leak in read_fcb
> imx: nandbcb: Fix potential overflow in fill_dbbt_data
> imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config
> imx: Fix market segment fuse offset on iMX8MP
> imx6: Remove AHCI device before boot OS
> imx: timer: Modify GPT timer driver for mx7
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mm-evk.dts | 534 ++++++------------------------------------
> arch/arm/dts/imx8mm-evk.dtsi | 489 ++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/imx8mm.dtsi | 53 ++++-
> arch/arm/dts/imx8mn-ddr4-evk.dts | 321 ++++++++++---------------
> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 6 +
> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
> arch/arm/dts/imx8mn-evk.dtsi | 360 ++++++++++++++++++++++++++++
> arch/arm/dts/imx8mn-pinfunc.h | 1266 +++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
> arch/arm/dts/imx8mn.dtsi | 411 +++++++++++++++++++++++++++-----
> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +
> arch/arm/dts/imx8mp-evk.dts | 117 +++++++++-
> arch/arm/dts/imx8mp-pinfunc.h | 360 +++++++++-------------------
> arch/arm/dts/imx8mp.dtsi | 234 +++++++++++++++++--
> arch/arm/dts/imx8mq-evk.dts | 186 ++++++++++++---
> arch/arm/dts/imx8mq-pinfunc.h | 623 ++++++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/dts/imx8mq.dtsi | 302 ++++++++++++++++++++++--
> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
> arch/arm/mach-imx/cmd_nandbcb.c | 34 +--
> arch/arm/mach-imx/cpu.c | 30 ++-
> arch/arm/mach-imx/imx8m/Kconfig | 6 +
> arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++
> arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +-
> arch/arm/mach-imx/spl.c | 2 +
> arch/arm/mach-imx/timer.c | 16 +-
> board/freescale/imx8mn_evk/Kconfig | 2 +-
> board/freescale/imx8mn_evk/Makefile | 1 +
> board/freescale/imx8mn_evk/lpddr4_timing.c | 1585 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mp_evk/imx8mp_evk.c | 65 +++++-
> configs/imx8mn_ddr4_evk_defconfig | 2 +-
> configs/imx8mn_evk_defconfig | 80 +++++++
> configs/imx8mp_evk_defconfig | 9 +-
> doc/board/freescale/imx8mn_evk.rst | 20 +-
> drivers/ddr/imx/imx8m/ddr_init.c | 5 +-
> drivers/power/power_i2c.c | 8 +-
> include/configs/imx8mn_evk.h | 9 +-
> include/configs/imx8mp_evk.h | 18 +-
> include/dt-bindings/clock/imx8mn-clock.h | 30 ++-
> include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++-
> include/dt-bindings/clock/imx8mq-clock.h | 31 ++-
> 41 files changed, 5743 insertions(+), 1722 deletions(-)
> create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk.dts
> create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
> create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
> create mode 100644 arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> create mode 100644 configs/imx8mn_evk_defconfig
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-16 13:47 ` Stefano Babic
@ 2021-01-18 1:40 ` Peng Fan
2021-01-19 9:59 ` Peng Fan
2021-01-19 12:41 ` Bin Meng
0 siblings, 2 replies; 7+ messages in thread
From: Peng Fan @ 2021-01-18 1:40 UTC (permalink / raw
To: u-boot
> Subject: Re: [NXP-IMX] please pull nxp-imx-2021-1-16
>
> Hi Peng,
>
> On 16.01.21 08:18, Peng Fan wrote:
> > Hi Stefano,
> >
> > Please pull nxp-imx-2021-1-16
> > ---------------------------------------
> > nandbcb update/fix
> > sync i.MX8M dts from Linux kernel
> > add i.MX8MN LPDDR4 evk board
> > eth support for i.MX8MP evk
> > ddr fix for i.MX8M
> > ---------------------------------------
> >
> > CI:
> > My github ci not work.
> > I run buildman local and not see failure.
> >
>
> No problem, I will start the runner on gitlab before PR.
Appreciate.
Not sure why my github travis CI not work as before (:
Thanks,
Peng.
>
> Regards,
> Stefano
>
> > Thanks,
> > Peng.
> >
> >
> > The following changes since commit
> 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
> >
> > Merge tag 'efi-2021-01-rc5-2' of
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitl
> >
> ab.denx.de%2Fu-boot%2Fcustodians%2Fu-boot-efi&data=04%7C01%7C
> peng.
> >
> fan%40nxp.com%7Ce620a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc
> 2b4c6fa92
> >
> cd99c5c301635%7C0%7C0%7C637464016805560765%7CUnknown%7CTWF
> pbGZsb3d8eyJ
> >
> WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%
> 7C1000
> >
> &sdata=y5%2BOewaXTpNU0qCzLZ2RwEkgKrFGpkpJ4vPNC5Tx%2Byw%3
> D&rese
> > rved=0 (2020-12-29 10:23:58 -0500)
> >
> > are available in the Git repository at:
> >
> >
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith
> >
> ub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cpeng.fan%40nxp.c
> om%7Ce6
> >
> 20a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc2b4c6fa92cd99c5c301
> 635%7C0%
> >
> 7C0%7C637464016805560765%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
> 4wLjAwMDAiL
> >
> CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8
> UD55C9
> > RvwJnoj4mnvvr2yvqQDXQnuJcWdaoPD2VqAU%3D&reserved=0
> > tags/nxp-imx-2021-1-16
> >
> > for you to fetch changes up to
> e02b2ca34b58131cb64b19887af007adb389f7bd:
> >
> > imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44
> > +0800)
> >
> > ----------------------------------------------------------------
> > Han Xu (1):
> > nandbcb: nand support for i.MX8MP
> >
> > Peng Fan (12):
> > imx: imx8mp_evk: enable eth support
> > imx: imx8mn_ddr4_evk: Use
> CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
> > imx: imx8mn_evk: correct stack/malloc adress
> > arm: dts: imx8mn: sync dts from Linux Kernel
> > imx: imx8mn: add i.MX8MN LPDDR4 EVK support
> > imx8m: clock: add type of set_clk_eqos
> > arm: dts: imx8mp: sync dts from Linux Kernel
> > arm: dts: imx8mm: sync dts from Linux Kernel
> > arm: dts: imx8mq: sync dts from Linux Kernel
> > imx8m: lowlevel_init: tune alignment
> > imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
> > imx8m: add QSPI boot dev
> >
> > Ye Li (9):
> > imx: ddr: imx8m: Move selfref_en after DDR scrub
> > nandbcb: Fix uninitialized variable
> > imx: nandbcb: Fix resource leak
> > imx: nandbcb: Fix resource leak in read_fcb
> > imx: nandbcb: Fix potential overflow in fill_dbbt_data
> > imx: nandbcb: Fix potential overflow in nandbcb_set_boot_config
> > imx: Fix market segment fuse offset on iMX8MP
> > imx6: Remove AHCI device before boot OS
> > imx: timer: Modify GPT timer driver for mx7
> >
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/imx8mm-evk.dts | 534
> ++++++------------------------------------
> > arch/arm/dts/imx8mm-evk.dtsi | 489
> ++++++++++++++++++++++++++++++++++++++
> > arch/arm/dts/imx8mm.dtsi | 53 ++++-
> > arch/arm/dts/imx8mn-ddr4-evk.dts | 321
> ++++++++++---------------
> > arch/arm/dts/imx8mn-evk-u-boot.dtsi | 6 +
> > arch/arm/dts/imx8mn-evk.dts | 128
> ++++++++++
> > arch/arm/dts/imx8mn-evk.dtsi | 360
> ++++++++++++++++++++++++++++
> > arch/arm/dts/imx8mn-pinfunc.h | 1266
> +++++++++++++++++++++++++++++++++++++++++++++++++--------------------
> -----------------------------
> > arch/arm/dts/imx8mn.dtsi | 411
> +++++++++++++++++++++++++++-----
> > arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +
> > arch/arm/dts/imx8mp-evk.dts | 117
> +++++++++-
> > arch/arm/dts/imx8mp-pinfunc.h | 360
> +++++++++-------------------
> > arch/arm/dts/imx8mp.dtsi | 234
> +++++++++++++++++--
> > arch/arm/dts/imx8mq-evk.dts | 186
> ++++++++++++---
> > arch/arm/dts/imx8mq-pinfunc.h | 623
> ++++++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm/dts/imx8mq.dtsi | 302
> ++++++++++++++++++++++--
> > arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> > arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
> > arch/arm/mach-imx/cmd_nandbcb.c | 34 +--
> > arch/arm/mach-imx/cpu.c | 30 ++-
> > arch/arm/mach-imx/imx8m/Kconfig | 6 +
> > arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++
> > arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +-
> > arch/arm/mach-imx/spl.c | 2 +
> > arch/arm/mach-imx/timer.c | 16 +-
> > board/freescale/imx8mn_evk/Kconfig | 2 +-
> > board/freescale/imx8mn_evk/Makefile | 1 +
> > board/freescale/imx8mn_evk/lpddr4_timing.c | 1585
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > board/freescale/imx8mp_evk/imx8mp_evk.c | 65 +++++-
> > configs/imx8mn_ddr4_evk_defconfig | 2 +-
> > configs/imx8mn_evk_defconfig | 80 +++++++
> > configs/imx8mp_evk_defconfig | 9 +-
> > doc/board/freescale/imx8mn_evk.rst | 20 +-
> > drivers/ddr/imx/imx8m/ddr_init.c | 5 +-
> > drivers/power/power_i2c.c | 8 +-
> > include/configs/imx8mn_evk.h | 9 +-
> > include/configs/imx8mp_evk.h | 18 +-
> > include/dt-bindings/clock/imx8mn-clock.h | 30 ++-
> > include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++-
> > include/dt-bindings/clock/imx8mq-clock.h | 31 ++-
> > 41 files changed, 5743 insertions(+), 1722 deletions(-)
> > create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
> > create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/imx8mn-evk.dts
> > create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
> > create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
> > create mode 100644
> arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
> > create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> > create mode 100644 configs/imx8mn_evk_defconfig
> >
>
> --
> ==============================================================
> =======
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> ==============================================================
> =======
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-18 1:40 ` Peng Fan
@ 2021-01-19 9:59 ` Peng Fan
2021-01-19 10:20 ` Stefano Babic
2021-01-19 12:41 ` Bin Meng
1 sibling, 1 reply; 7+ messages in thread
From: Peng Fan @ 2021-01-19 9:59 UTC (permalink / raw
To: u-boot
Hi Stefano,
> Subject: RE: [NXP-IMX] please pull nxp-imx-2021-1-16
>
> > Subject: Re: [NXP-IMX] please pull nxp-imx-2021-1-16
> >
> > Hi Peng,
> >
> > On 16.01.21 08:18, Peng Fan wrote:
> > > Hi Stefano,
> > >
> > > Please pull nxp-imx-2021-1-16
> > > ---------------------------------------
> > > nandbcb update/fix
> > > sync i.MX8M dts from Linux kernel
> > > add i.MX8MN LPDDR4 evk board
> > > eth support for i.MX8MP evk
> > > ddr fix for i.MX8M
> > > ---------------------------------------
> > >
> > > CI:
> > > My github ci not work.
> > > I run buildman local and not see failure.
> > >
> >
> > No problem, I will start the runner on gitlab before PR.
Forgot to mention that my PR was based on Tom's tree,
not imx/next.
There might be conflict with imx/next, should be dts sync
part, do you need to resend PR based on imx/next?
Thanks,
Peng.
>
> Appreciate.
> Not sure why my github travis CI not work as before (:
>
> Thanks,
> Peng.
>
> >
> > Regards,
> > Stefano
> >
> > > Thanks,
> > > Peng.
> > >
> > >
> > > The following changes since commit
> > 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
> > >
> > > Merge tag 'efi-2021-01-rc5-2' of
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgi
> > > tl
> > >
> >
> ab.denx.de%2Fu-boot%2Fcustodians%2Fu-boot-efi&data=04%7C01%7C
> > peng.
> > >
> >
> fan%40nxp.com%7Ce620a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc
> > 2b4c6fa92
> > >
> >
> cd99c5c301635%7C0%7C0%7C637464016805560765%7CUnknown%7CTWF
> > pbGZsb3d8eyJ
> > >
> >
> WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%
> > 7C1000
> > >
> >
> &sdata=y5%2BOewaXTpNU0qCzLZ2RwEkgKrFGpkpJ4vPNC5Tx%2Byw%3
> > D&rese
> > > rved=0 (2020-12-29 10:23:58 -0500)
> > >
> > > are available in the Git repository at:
> > >
> > >
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgi
> > > th
> > >
> >
> ub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cpeng.fan%40nxp.c
> > om%7Ce6
> > >
> >
> 20a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc2b4c6fa92cd99c5c301
> > 635%7C0%
> > >
> >
> 7C0%7C637464016805560765%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
> > 4wLjAwMDAiL
> > >
> >
> CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8
> > UD55C9
> > > RvwJnoj4mnvvr2yvqQDXQnuJcWdaoPD2VqAU%3D&reserved=0
> > > tags/nxp-imx-2021-1-16
> > >
> > > for you to fetch changes up to
> > e02b2ca34b58131cb64b19887af007adb389f7bd:
> > >
> > > imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44
> > > +0800)
> > >
> > > ----------------------------------------------------------------
> > > Han Xu (1):
> > > nandbcb: nand support for i.MX8MP
> > >
> > > Peng Fan (12):
> > > imx: imx8mp_evk: enable eth support
> > > imx: imx8mn_ddr4_evk: Use
> > CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
> > > imx: imx8mn_evk: correct stack/malloc adress
> > > arm: dts: imx8mn: sync dts from Linux Kernel
> > > imx: imx8mn: add i.MX8MN LPDDR4 EVK support
> > > imx8m: clock: add type of set_clk_eqos
> > > arm: dts: imx8mp: sync dts from Linux Kernel
> > > arm: dts: imx8mm: sync dts from Linux Kernel
> > > arm: dts: imx8mq: sync dts from Linux Kernel
> > > imx8m: lowlevel_init: tune alignment
> > > imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
> > > imx8m: add QSPI boot dev
> > >
> > > Ye Li (9):
> > > imx: ddr: imx8m: Move selfref_en after DDR scrub
> > > nandbcb: Fix uninitialized variable
> > > imx: nandbcb: Fix resource leak
> > > imx: nandbcb: Fix resource leak in read_fcb
> > > imx: nandbcb: Fix potential overflow in fill_dbbt_data
> > > imx: nandbcb: Fix potential overflow in
> nandbcb_set_boot_config
> > > imx: Fix market segment fuse offset on iMX8MP
> > > imx6: Remove AHCI device before boot OS
> > > imx: timer: Modify GPT timer driver for mx7
> > >
> > > arch/arm/dts/Makefile | 1 +
> > > arch/arm/dts/imx8mm-evk.dts | 534
> > ++++++------------------------------------
> > > arch/arm/dts/imx8mm-evk.dtsi | 489
> > ++++++++++++++++++++++++++++++++++++++
> > > arch/arm/dts/imx8mm.dtsi | 53
> ++++-
> > > arch/arm/dts/imx8mn-ddr4-evk.dts | 321
> > ++++++++++---------------
> > > arch/arm/dts/imx8mn-evk-u-boot.dtsi | 6 +
> > > arch/arm/dts/imx8mn-evk.dts | 128
> > ++++++++++
> > > arch/arm/dts/imx8mn-evk.dtsi | 360
> > ++++++++++++++++++++++++++++
> > > arch/arm/dts/imx8mn-pinfunc.h | 1266
> >
> +++++++++++++++++++++++++++++++++++++++++++++++++--------------------
> > -----------------------------
> > > arch/arm/dts/imx8mn.dtsi | 411
> > +++++++++++++++++++++++++++-----
> > > arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +
> > > arch/arm/dts/imx8mp-evk.dts | 117
> > +++++++++-
> > > arch/arm/dts/imx8mp-pinfunc.h | 360
> > +++++++++-------------------
> > > arch/arm/dts/imx8mp.dtsi | 234
> > +++++++++++++++++--
> > > arch/arm/dts/imx8mq-evk.dts | 186
> > ++++++++++++---
> > > arch/arm/dts/imx8mq-pinfunc.h | 623
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> > > arch/arm/dts/imx8mq.dtsi | 302
> > ++++++++++++++++++++++--
> > > arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> > > arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
> > > arch/arm/mach-imx/cmd_nandbcb.c | 34 +--
> > > arch/arm/mach-imx/cpu.c | 30 ++-
> > > arch/arm/mach-imx/imx8m/Kconfig | 6 +
> > > arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++
> > > arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +-
> > > arch/arm/mach-imx/spl.c | 2 +
> > > arch/arm/mach-imx/timer.c | 16 +-
> > > board/freescale/imx8mn_evk/Kconfig | 2 +-
> > > board/freescale/imx8mn_evk/Makefile | 1 +
> > > board/freescale/imx8mn_evk/lpddr4_timing.c | 1585
> >
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > > board/freescale/imx8mp_evk/imx8mp_evk.c | 65
> +++++-
> > > configs/imx8mn_ddr4_evk_defconfig | 2 +-
> > > configs/imx8mn_evk_defconfig | 80
> +++++++
> > > configs/imx8mp_evk_defconfig | 9 +-
> > > doc/board/freescale/imx8mn_evk.rst | 20 +-
> > > drivers/ddr/imx/imx8m/ddr_init.c | 5 +-
> > > drivers/power/power_i2c.c | 8 +-
> > > include/configs/imx8mn_evk.h | 9 +-
> > > include/configs/imx8mp_evk.h | 18 +-
> > > include/dt-bindings/clock/imx8mn-clock.h | 30 ++-
> > > include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++-
> > > include/dt-bindings/clock/imx8mq-clock.h | 31 ++-
> > > 41 files changed, 5743 insertions(+), 1722 deletions(-)
> > > create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
> > > create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> > > create mode 100644 arch/arm/dts/imx8mn-evk.dts
> > > create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
> > > create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
> > > create mode 100644
> > arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
> > > create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> > > create mode 100644 configs/imx8mn_evk_defconfig
> > >
> >
> > --
> >
> ==============================================================
> > =======
> > DENX Software Engineering GmbH, Managing Director: Wolfgang
> Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
> sbabic at denx.de
> >
> ==============================================================
> > =======
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-19 9:59 ` Peng Fan
@ 2021-01-19 10:20 ` Stefano Babic
0 siblings, 0 replies; 7+ messages in thread
From: Stefano Babic @ 2021-01-19 10:20 UTC (permalink / raw
To: u-boot
On 19.01.21 10:59, Peng Fan wrote:
> Hi Stefano,
>
>> Subject: RE: [NXP-IMX] please pull nxp-imx-2021-1-16
>>
>>> Subject: Re: [NXP-IMX] please pull nxp-imx-2021-1-16
>>>
>>> Hi Peng,
>>>
>>> On 16.01.21 08:18, Peng Fan wrote:
>>>> Hi Stefano,
>>>>
>>>> Please pull nxp-imx-2021-1-16
>>>> ---------------------------------------
>>>> nandbcb update/fix
>>>> sync i.MX8M dts from Linux kernel
>>>> add i.MX8MN LPDDR4 evk board
>>>> eth support for i.MX8MP evk
>>>> ddr fix for i.MX8M
>>>> ---------------------------------------
>>>>
>>>> CI:
>>>> My github ci not work.
>>>> I run buildman local and not see failure.
>>>>
>>>
>>> No problem, I will start the runner on gitlab before PR.
>
> Forgot to mention that my PR was based on Tom's tree,
> not imx/next.
>
> There might be conflict with imx/next, should be dts sync
> part, do you need to resend PR based on imx/next?
Let me try, I will merge your PR first, and I check later with -next.
I will be back if I find problems ;-)
Stefano
>
> Thanks,
> Peng.
>
>>
>> Appreciate.
>> Not sure why my github travis CI not work as before (:
>>
>> Thanks,
>> Peng.
>>
>>>
>>> Regards,
>>> Stefano
>>>
>>>> Thanks,
>>>> Peng.
>>>>
>>>>
>>>> The following changes since commit
>>> 21e1cae7902e6a9b1d7cf47cf4764e6fe7d3452a:
>>>>
>>>> Merge tag 'efi-2021-01-rc5-2' of
>>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgi
>>>> tl
>>>>
>>>
>> ab.denx.de%2Fu-boot%2Fcustodians%2Fu-boot-efi&data=04%7C01%7C
>>> peng.
>>>>
>>>
>> fan%40nxp.com%7Ce620a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc
>>> 2b4c6fa92
>>>>
>>>
>> cd99c5c301635%7C0%7C0%7C637464016805560765%7CUnknown%7CTWF
>>> pbGZsb3d8eyJ
>>>>
>>>
>> WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%
>>> 7C1000
>>>>
>>>
>> &sdata=y5%2BOewaXTpNU0qCzLZ2RwEkgKrFGpkpJ4vPNC5Tx%2Byw%3
>>> D&rese
>>>> rved=0 (2020-12-29 10:23:58 -0500)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>
>>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgi
>>>> th
>>>>
>>>
>> ub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cpeng.fan%40nxp.c
>>> om%7Ce6
>>>>
>>>
>> 20a4773aeb4348de9508d8ba2555aa%7C686ea1d3bc2b4c6fa92cd99c5c301
>>> 635%7C0%
>>>>
>>>
>> 7C0%7C637464016805560765%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
>>> 4wLjAwMDAiL
>>>>
>>>
>> CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8
>>> UD55C9
>>>> RvwJnoj4mnvvr2yvqQDXQnuJcWdaoPD2VqAU%3D&reserved=0
>>>> tags/nxp-imx-2021-1-16
>>>>
>>>> for you to fetch changes up to
>>> e02b2ca34b58131cb64b19887af007adb389f7bd:
>>>>
>>>> imx: timer: Modify GPT timer driver for mx7 (2021-01-15 18:22:44
>>>> +0800)
>>>>
>>>> ----------------------------------------------------------------
>>>> Han Xu (1):
>>>> nandbcb: nand support for i.MX8MP
>>>>
>>>> Peng Fan (12):
>>>> imx: imx8mp_evk: enable eth support
>>>> imx: imx8mn_ddr4_evk: Use
>>> CONFIG_TARGET_IMX8MN_DDR4_EVK for DDR4 EVK board
>>>> imx: imx8mn_evk: correct stack/malloc adress
>>>> arm: dts: imx8mn: sync dts from Linux Kernel
>>>> imx: imx8mn: add i.MX8MN LPDDR4 EVK support
>>>> imx8m: clock: add type of set_clk_eqos
>>>> arm: dts: imx8mp: sync dts from Linux Kernel
>>>> arm: dts: imx8mm: sync dts from Linux Kernel
>>>> arm: dts: imx8mq: sync dts from Linux Kernel
>>>> imx8m: lowlevel_init: tune alignment
>>>> imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF
>>>> imx8m: add QSPI boot dev
>>>>
>>>> Ye Li (9):
>>>> imx: ddr: imx8m: Move selfref_en after DDR scrub
>>>> nandbcb: Fix uninitialized variable
>>>> imx: nandbcb: Fix resource leak
>>>> imx: nandbcb: Fix resource leak in read_fcb
>>>> imx: nandbcb: Fix potential overflow in fill_dbbt_data
>>>> imx: nandbcb: Fix potential overflow in
>> nandbcb_set_boot_config
>>>> imx: Fix market segment fuse offset on iMX8MP
>>>> imx6: Remove AHCI device before boot OS
>>>> imx: timer: Modify GPT timer driver for mx7
>>>>
>>>> arch/arm/dts/Makefile | 1 +
>>>> arch/arm/dts/imx8mm-evk.dts | 534
>>> ++++++------------------------------------
>>>> arch/arm/dts/imx8mm-evk.dtsi | 489
>>> ++++++++++++++++++++++++++++++++++++++
>>>> arch/arm/dts/imx8mm.dtsi | 53
>> ++++-
>>>> arch/arm/dts/imx8mn-ddr4-evk.dts | 321
>>> ++++++++++---------------
>>>> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 6 +
>>>> arch/arm/dts/imx8mn-evk.dts | 128
>>> ++++++++++
>>>> arch/arm/dts/imx8mn-evk.dtsi | 360
>>> ++++++++++++++++++++++++++++
>>>> arch/arm/dts/imx8mn-pinfunc.h | 1266
>>>
>> +++++++++++++++++++++++++++++++++++++++++++++++++--------------------
>>> -----------------------------
>>>> arch/arm/dts/imx8mn.dtsi | 411
>>> +++++++++++++++++++++++++++-----
>>>> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +
>>>> arch/arm/dts/imx8mp-evk.dts | 117
>>> +++++++++-
>>>> arch/arm/dts/imx8mp-pinfunc.h | 360
>>> +++++++++-------------------
>>>> arch/arm/dts/imx8mp.dtsi | 234
>>> +++++++++++++++++--
>>>> arch/arm/dts/imx8mq-evk.dts | 186
>>> ++++++++++++---
>>>> arch/arm/dts/imx8mq-pinfunc.h | 623
>>> ++++++++++++++++++++++++++++++++++++++++++++++++
>>>> arch/arm/dts/imx8mq.dtsi | 302
>>> ++++++++++++++++++++++--
>>>> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
>>>> arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
>>>> arch/arm/mach-imx/cmd_nandbcb.c | 34 +--
>>>> arch/arm/mach-imx/cpu.c | 30 ++-
>>>> arch/arm/mach-imx/imx8m/Kconfig | 6 +
>>>> arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg | 17 ++
>>>> arch/arm/mach-imx/imx8m/lowlevel_init.S | 2 +-
>>>> arch/arm/mach-imx/spl.c | 2 +
>>>> arch/arm/mach-imx/timer.c | 16 +-
>>>> board/freescale/imx8mn_evk/Kconfig | 2 +-
>>>> board/freescale/imx8mn_evk/Makefile | 1 +
>>>> board/freescale/imx8mn_evk/lpddr4_timing.c | 1585
>>>
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>> board/freescale/imx8mp_evk/imx8mp_evk.c | 65
>> +++++-
>>>> configs/imx8mn_ddr4_evk_defconfig | 2 +-
>>>> configs/imx8mn_evk_defconfig | 80
>> +++++++
>>>> configs/imx8mp_evk_defconfig | 9 +-
>>>> doc/board/freescale/imx8mn_evk.rst | 20 +-
>>>> drivers/ddr/imx/imx8m/ddr_init.c | 5 +-
>>>> drivers/power/power_i2c.c | 8 +-
>>>> include/configs/imx8mn_evk.h | 9 +-
>>>> include/configs/imx8mp_evk.h | 18 +-
>>>> include/dt-bindings/clock/imx8mn-clock.h | 30 ++-
>>>> include/dt-bindings/clock/imx8mp-clock.h | 95 +++++++-
>>>> include/dt-bindings/clock/imx8mq-clock.h | 31 ++-
>>>> 41 files changed, 5743 insertions(+), 1722 deletions(-)
>>>> create mode 100644 arch/arm/dts/imx8mm-evk.dtsi
>>>> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>>>> create mode 100644 arch/arm/dts/imx8mn-evk.dts
>>>> create mode 100644 arch/arm/dts/imx8mn-evk.dtsi
>>>> create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
>>>> create mode 100644
>>> arch/arm/mach-imx/imx8m/imximage-8mn-lpddr4.cfg
>>>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>>>> create mode 100644 configs/imx8mn_evk_defconfig
>>>>
>>>
>>> --
>>>
>> ==============================================================
>>> =======
>>> DENX Software Engineering GmbH, Managing Director: Wolfgang
>> Denk
>>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email:
>> sbabic at denx.de
>>>
>> ==============================================================
>>> =======
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-18 1:40 ` Peng Fan
2021-01-19 9:59 ` Peng Fan
@ 2021-01-19 12:41 ` Bin Meng
1 sibling, 0 replies; 7+ messages in thread
From: Bin Meng @ 2021-01-19 12:41 UTC (permalink / raw
To: u-boot
Hi Peng,
On Mon, Jan 18, 2021 at 9:40 AM Peng Fan <peng.fan@nxp.com> wrote:
>
> > Subject: Re: [NXP-IMX] please pull nxp-imx-2021-1-16
> >
> > Hi Peng,
> >
> > On 16.01.21 08:18, Peng Fan wrote:
> > > Hi Stefano,
> > >
> > > Please pull nxp-imx-2021-1-16
> > > ---------------------------------------
> > > nandbcb update/fix
> > > sync i.MX8M dts from Linux kernel
> > > add i.MX8MN LPDDR4 evk board
> > > eth support for i.MX8MP evk
> > > ddr fix for i.MX8M
> > > ---------------------------------------
> > >
> > > CI:
> > > My github ci not work.
> > > I run buildman local and not see failure.
> > >
> >
> > No problem, I will start the runner on gitlab before PR.
>
> Appreciate.
> Not sure why my github travis CI not work as before (:
This is because U-Boot has dropped travis-ci support.
Please switch to gitlab-ci or azure pipelines.
Regards,
Bin
^ permalink raw reply [flat|nested] 7+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-1-16
2021-01-16 7:18 [NXP-IMX] please pull nxp-imx-2021-1-16 Peng Fan
2021-01-16 13:47 ` Stefano Babic
@ 2021-01-19 19:45 ` Tom Rini
1 sibling, 0 replies; 7+ messages in thread
From: Tom Rini @ 2021-01-19 19:45 UTC (permalink / raw
To: u-boot
On Sat, Jan 16, 2021 at 07:18:17AM +0000, Peng Fan wrote:
> Hi Stefano,
>
> Please pull nxp-imx-2021-1-16
> ---------------------------------------
> nandbcb update/fix
> sync i.MX8M dts from Linux kernel
> add i.MX8MN LPDDR4 evk board
> eth support for i.MX8MP evk
> ddr fix for i.MX8M
> ---------------------------------------
>
> CI:
> My github ci not work.
Note that we dropped Travis CI as it is deprecating support for projects
like ours that use a ton of build time. You can submit a github PR
against https://github.com/u-boot/u-boot and that will trigger an Azure
pipeline to be run and you can see the results that way. It's also
quicker than Travis was.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210119/2a52e114/attachment.sig>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-19 19:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-16 7:18 [NXP-IMX] please pull nxp-imx-2021-1-16 Peng Fan
2021-01-16 13:47 ` Stefano Babic
2021-01-18 1:40 ` Peng Fan
2021-01-19 9:59 ` Peng Fan
2021-01-19 10:20 ` Stefano Babic
2021-01-19 12:41 ` Bin Meng
2021-01-19 19:45 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.