* Applied "regmap: Split use_single_rw internally into use_single_read/write" to the regmap tree
@ 2015-08-21 16:34 Mark Brown
0 siblings, 0 replies; only message in thread
From: Mark Brown @ 2015-08-21 16:34 UTC (permalink / raw
To: Markus Pargmann, Mark Brown; +Cc: linux-kernel
The patch
regmap: Split use_single_rw internally into use_single_read/write
has been applied to the regmap tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 67921a1a6660d32cc2770d05d656a1187b6d94d5 Mon Sep 17 00:00:00 2001
From: Markus Pargmann <mpa@pengutronix.de>
Date: Fri, 21 Aug 2015 10:26:42 +0200
Subject: [PATCH] regmap: Split use_single_rw internally into
use_single_read/write
use_single_rw currently reflects the capabilities of the connected
device. The capabilities of the bus are currently missing for this
variable.
As there are read only and write only buses we need seperate values for
use_single_rw to also reflect tha capabilities of the bus.
This patch splits use_single_rw into use_single_read and
use_single_write. The initialization is changed to check the
configuration for use_single_rw and to check the capabilities of the
used bus.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/base/regmap/internal.h | 6 ++++--
drivers/base/regmap/regcache.c | 2 +-
drivers/base/regmap/regmap-irq.c | 4 ++--
drivers/base/regmap/regmap.c | 9 +++++----
4 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index b2b2849..d744ae3 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -139,8 +139,10 @@ struct regmap {
struct reg_default *patch;
int patch_regs;
- /* if set, converts bulk rw to single rw */
- bool use_single_rw;
+ /* if set, converts bulk read to single read */
+ bool use_single_read;
+ /* if set, converts bulk read to single read */
+ bool use_single_write;
/* if set, the device supports multi write mode */
bool can_multi_write;
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index b9862d7..6f8a13e 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -729,7 +729,7 @@ int regcache_sync_block(struct regmap *map, void *block,
unsigned int block_base, unsigned int start,
unsigned int end)
{
- if (regmap_can_raw_write(map) && !map->use_single_rw)
+ if (regmap_can_raw_write(map) && !map->use_single_write)
return regcache_sync_block_raw(map, block, cache_present,
block_base, start, end);
else
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 2597600..38d1f72 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -209,7 +209,7 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
* Read in the statuses, using a single bulk read if possible
* in order to reduce the I/O overheads.
*/
- if (!map->use_single_rw && map->reg_stride == 1 &&
+ if (!map->use_single_read && map->reg_stride == 1 &&
data->irq_reg_stride == 1) {
u8 *buf8 = data->status_reg_buf;
u16 *buf16 = data->status_reg_buf;
@@ -398,7 +398,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
else
d->irq_reg_stride = 1;
- if (!map->use_single_rw && map->reg_stride == 1 &&
+ if (!map->use_single_read && map->reg_stride == 1 &&
d->irq_reg_stride == 1) {
d->status_reg_buf = kmalloc(map->format.val_bytes *
chip->num_regs, GFP_KERNEL);
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 90bf5ea..bc82fd3 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -576,7 +576,8 @@ struct regmap *regmap_init(struct device *dev,
map->reg_stride = config->reg_stride;
else
map->reg_stride = 1;
- map->use_single_rw = config->use_single_rw;
+ map->use_single_read = config->use_single_rw || !bus || !bus->read;
+ map->use_single_write = config->use_single_rw || !bus || !bus->write;
map->can_multi_write = config->can_multi_write;
map->dev = dev;
map->bus = bus;
@@ -766,7 +767,7 @@ struct regmap *regmap_init(struct device *dev,
if ((reg_endian != REGMAP_ENDIAN_BIG) ||
(val_endian != REGMAP_ENDIAN_BIG))
goto err_map;
- map->use_single_rw = true;
+ map->use_single_write = true;
}
if (!map->format.format_write &&
@@ -1720,7 +1721,7 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
}
out:
map->unlock(map->lock_arg);
- } else if (map->use_single_rw) {
+ } else if (map->use_single_write) {
map->lock(map->lock_arg);
for (i = 0; i < val_count; i++) {
ret = _regmap_raw_write(map,
@@ -2312,7 +2313,7 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
* Some devices does not support bulk read, for
* them we have a series of single read operations.
*/
- if (map->use_single_rw) {
+ if (map->use_single_read) {
for (i = 0; i < val_count; i++) {
ret = regmap_raw_read(map,
reg + (i * map->reg_stride),
--
2.5.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2015-08-21 16:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-21 16:34 Applied "regmap: Split use_single_rw internally into use_single_read/write" to the regmap tree Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.