From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: Kumar Sanghvi <kumaras@chelsio.com>,
Felix Marti <felix@chelsio.com>,
Nirranjan Kirubaharan <nirranjan@chelsio.com>
Subject: [PATCH 4/5] config: enable cxgbe PMD for compilation and linking.
Date: Fri, 22 May 2015 18:54:22 +0530 [thread overview]
Message-ID: <a62f238e4522f61c6dc03a8f0650a934cf62e06c.1432300701.git.rahul.lakkireddy@chelsio.com> (raw)
In-Reply-To: <cover.1432300701.git.rahul.lakkireddy@chelsio.com>
In-Reply-To: <cover.1432300701.git.rahul.lakkireddy@chelsio.com>
Changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. lib/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
config/common_linuxapp | 10 ++++++++++
lib/Makefile | 1 +
mk/rte.app.mk | 1 +
3 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 0078dc9..dfafd45 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -208,6 +208,16 @@ CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
#
+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index d94355d..19beb28 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -46,6 +46,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += librte_pmd_fm10k
DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += librte_pmd_mlx4
+DIRS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += librte_pmd_cxgbe
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 1a2043a..0ed9651 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -128,6 +128,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
_LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4
+_LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
--
1.7.1
next prev parent reply other threads:[~2015-05-22 13:25 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 13:24 [PATCH 0/5] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-05-22 13:24 ` [PATCH 1/5] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-05-22 13:24 ` [PATCH 2/5] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-05-22 16:42 ` Stephen Hemminger
2015-05-23 5:57 ` Rahul Lakkireddy
2015-05-26 17:02 ` Rahul Lakkireddy
2015-05-26 17:24 ` Stephen Hemminger
2015-05-26 18:13 ` Rahul Lakkireddy
2015-05-22 16:43 ` Stephen Hemminger
2015-05-23 5:56 ` Rahul Lakkireddy
2015-05-22 16:46 ` Stephen Hemminger
2015-05-23 5:53 ` Rahul Lakkireddy
2015-05-27 5:49 ` Thomas Monjalon
2015-05-27 11:26 ` Rahul Lakkireddy
2015-05-22 13:24 ` [PATCH 3/5] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-05-27 5:38 ` Thomas Monjalon
2015-05-27 11:24 ` Rahul Lakkireddy
2015-05-22 13:24 ` Rahul Lakkireddy [this message]
2015-05-22 13:24 ` [PATCH 5/5] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 00/11] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 01/11] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 02/11] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-17 12:30 ` Thomas Monjalon
2015-06-18 7:06 ` Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 03/11] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 04/11] cxgbe: add TX " Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 05/11] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 06/11] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 07/11] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 08/11] cxgbe: add flow control " Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 09/11] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 10/11] config: enable cxgbe PMD for compilation and linking Rahul Lakkireddy
2015-06-01 17:30 ` [PATCH v2 11/11] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-28 19:32 ` Thomas Monjalon
2015-06-29 23:23 ` Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-28 19:34 ` Thomas Monjalon
2015-06-29 23:18 ` Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 8/9] cxgbe: add flow control " Rahul Lakkireddy
2015-06-18 12:17 ` [PATCH v3 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-18 13:47 ` Mcnamara, John
2015-06-18 13:44 ` [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Mcnamara, John
2015-06-29 23:28 ` [PATCH v4 " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 8/9] cxgbe: add flow control " Rahul Lakkireddy
2015-06-29 23:28 ` [PATCH v4 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-30 21:01 ` [PATCH v4 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Thomas Monjalon
2015-07-01 6:35 ` Rahul Lakkireddy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a62f238e4522f61c6dc03a8f0650a934cf62e06c.1432300701.git.rahul.lakkireddy@chelsio.com \
--to=rahul.lakkireddy@chelsio.com \
--cc=dev@dpdk.org \
--cc=felix@chelsio.com \
--cc=kumaras@chelsio.com \
--cc=nirranjan@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.