From: Fourhundred Thecat <400thecat@ik.me>
To: ath11k@lists.infradead.org
Subject: ath11k_pci: failed to connect to HTT: -110
Date: Sat, 30 Sep 2023 06:19:36 +0200 [thread overview]
Message-ID: <8caf5a3d-943d-f552-19be-efe82ddd351e@ik.me> (raw)
Hello,
I have Qualcomm QCNFA765 card (Lenovo T14s gen4).
I am using custom-compiled kernel 6.1.55. I have ath11k_pci in the
kernel, and all firmware files are loaded successfully. Yet, when
booting, I see on the console:
ath11k_pci: Service connect timeout
ath11k_pci: failed to connect to HTT: -110
ath11k_pci: failed to start core: -110
and the network device wlan0 does not exist.
But lspci -v shows the network card, and module it is using.
and dmesg | grep ath11k
ath11k_pci: BAR 0: assigned [mem 0x90600000-0x907fffff 64bit]
ath11k_pci: enabling device (0000 -> 0002)
ath11k_pci: MSI vectors: 1
ath11k_pci: wcn6855 hw2.1
ath11k_pci: chip_id 0x12 chip_family 0xb board_id 0xff soc_id 0x400c1211
ath11k_pci: fw_version 0x11090c35 fw_build_timestamp 2022-04-18 20:23
fw_build_id WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
ath11k_pci: leaving PCI ASPM disabled to avoid MHI M2 problems
ath11k_pci: failed to receive control response completion, polling..
ath11k_pci: Service connect timeout
ath11k_pci: failed to connect to HTT: -110
ath11k_pci: failed to start core: -110
ath11k_pci: ignore reset dev flags 0x4000
ath11k_pci: ignore reset dev flags 0x4000
ath11k_pci: failed to wait wlan mode request (mode 4): -110
ath11k_pci: qmi failed to send wlan mode off: -110
since I am using custom kernel, it is possible i am missing some kernel
option. Here is my kernel config
https://ctxt.io/2/AABQk4VZEg
can somebody please tell me what is the problem ?
thank you,
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
reply other threads:[~2023-09-30 4:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8caf5a3d-943d-f552-19be-efe82ddd351e@ik.me \
--to=400thecat@ik.me \
--cc=ath11k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).