From: "Nicolas Escande" <nico.escande@gmail.com>
To: "P Praneesh" <quic_ppranees@quicinc.com>, <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH 3/3] wifi: ath12k: fix firmware crash during reo reinject
Date: Tue, 21 May 2024 10:50:42 +0200 [thread overview]
Message-ID: <D1F6ZU89YWPF.X1SZ9JNQNPFC@gmail.com> (raw)
In-Reply-To: <20240520070045.631029-4-quic_ppranees@quicinc.com>
On Mon May 20, 2024 at 9:00 AM CEST, P Praneesh wrote:
> When handling fragmented packets, the ath12k driver reassembles each
> fragment into a normal packet and then reinjects it into the HW ring.
> However, a firmware crash occurs during this reinjection process.
> The issue arises because the driver populates peer metadata in
> reo_ent_ring->queue_addr_lo, while the firmware expects the physical
> address obtained from the corresponding peer’s queue descriptor. Fix it
> by filling peer's queue descriptor's physical address in queue_addr_lo.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1
>
> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
> ---
> drivers/net/wireless/ath/ath12k/dp_rx.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
> index 2bfcc19d15ea..2adb6c7d4a42 100644
> --- a/drivers/net/wireless/ath/ath12k/dp_rx.c
> +++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
> @@ -2967,7 +2967,7 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
> struct hal_srng *srng;
> dma_addr_t link_paddr, buf_paddr;
> u32 desc_bank, msdu_info, msdu_ext_info, mpdu_info;
> - u32 cookie, hal_rx_desc_sz, dest_ring_info0;
> + u32 cookie, hal_rx_desc_sz, dest_ring_info0, queue_addr_hi;
> int ret;
> struct ath12k_rx_desc_info *desc_info;
> enum hal_rx_buf_return_buf_manager idle_link_rbm = dp->idle_link_rbm;
> @@ -3060,13 +3060,11 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
> reo_ent_ring->rx_mpdu_info.peer_meta_data =
> reo_dest_ring->rx_mpdu_info.peer_meta_data;
>
> - /* Firmware expects physical address to be filled in queue_addr_lo in
> - * the MLO scenario and in case of non MLO peer meta data needs to be
> - * filled.
> - * TODO: Need to handle for MLO scenario.
> - */
> - reo_ent_ring->queue_addr_lo = reo_dest_ring->rx_mpdu_info.peer_meta_data;
> - reo_ent_ring->info0 = le32_encode_bits(dst_ind,
> + reo_ent_ring->queue_addr_lo = cpu_to_le32(lower_32_bits(rx_tid->paddr));
> + queue_addr_hi = upper_32_bits(rx_tid->paddr);
Shouldn't there be a cpu_to_le32 somewhere here ? It just seems asymetrical
between the two values extracted from rx_tid->paddr
> + reo_ent_ring->info0 = le32_encode_bits(queue_addr_hi,
> + HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI) |
> + le32_encode_bits(dst_ind,
> HAL_REO_ENTR_RING_INFO0_DEST_IND);
>
> reo_ent_ring->info1 = le32_encode_bits(rx_tid->cur_sn,
next prev parent reply other threads:[~2024-05-21 8:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-20 7:00 [PATCH 0/3] wifi: ath12k: fix issues in rx fragmentation path P Praneesh
2024-05-20 7:00 ` [PATCH 1/3] wifi: ath12k: change DMA direction while mapping reinjected packets P Praneesh
2024-05-20 23:38 ` Jeff Johnson
2024-05-25 8:57 ` Kalle Valo
2024-05-20 7:00 ` [PATCH 2/3] wifi: ath12k: fix invalid memory access while processing fragmented packets P Praneesh
2024-05-20 23:38 ` Jeff Johnson
2024-05-20 7:00 ` [PATCH 3/3] wifi: ath12k: fix firmware crash during reo reinject P Praneesh
2024-05-20 23:38 ` Jeff Johnson
2024-05-21 8:50 ` Nicolas Escande [this message]
2024-05-22 7:15 ` Praneesh P
2024-05-22 7:28 ` Nicolas Escande
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D1F6ZU89YWPF.X1SZ9JNQNPFC@gmail.com \
--to=nico.escande@gmail.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_ppranees@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).