From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Daniel Golle <daniel@makrotopia.org>,
DENG Qingfang <dqfext@gmail.com>,
Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations
Date: Sun, 14 Apr 2024 01:08:20 +0300 [thread overview]
Message-ID: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com> (raw)
In-Reply-To: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-0-b08936df2770@arinc9.com>
The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
1 file changed, 43 insertions(+), 65 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(1, 0xb8, "RxArlDrop"),
};
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
- int value, ret;
+ int ret;
+
+ mt7530_mutex_lock(priv);
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
- /* Read the content of the MMD's selected register */
- value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA);
-
- return value;
+ /* Write the data into MMD's selected register */
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, val);
err:
- dev_err(&bus->dev, "failed to read mmd register\n");
+ if (ret < 0)
+ dev_err(&bus->dev, "failed to write mmd register\n");
- return ret;
+ mt7530_mutex_unlock(priv);
}
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
- int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
{
struct mii_bus *bus = priv->bus;
+ u32 val;
int ret;
+ mt7530_mutex_lock(priv);
+
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
+ /* Read the content of the MMD's selected register */
+ val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA);
+ val &= ~mask;
+ val |= set;
/* Write the data into MMD's selected register */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, data);
+ MII_MMD_DATA, val);
err:
if (ret < 0)
- dev_err(&bus->dev,
- "failed to write mmd register\n");
- return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_mutex_lock(priv);
-
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
- mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
- u32 val;
-
- mt7530_mutex_lock(priv);
-
- val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
- val &= ~mask;
- val |= set;
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+ dev_err(&bus->dev, "failed to write mmd register\n");
mt7530_mutex_unlock(priv);
}
--
2.40.1
prev parent reply other threads:[~2024-04-13 22:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-13 22:08 [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree Arınç ÜNAL
2024-04-13 22:08 ` Arınç ÜNAL [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-2-b08936df2770@arinc9.com \
--to=arinc.unal@arinc9.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bartel.eerdekens@constell8.be \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=erkin.bozoglu@xeront.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mithat.guner@xeront.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).