From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Daniel Golle <daniel@makrotopia.org>,
DENG Qingfang <dqfext@gmail.com>,
Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next v2 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree
Date: Sun, 14 Apr 2024 09:07:41 +0300 [thread overview]
Message-ID: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v2-1-1a7649c4d3b6@arinc9.com> (raw)
In-Reply-To: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v2-0-1a7649c4d3b6@arinc9.com>
Read the PHY address the switch listens on from the reg property of the
switch node on the device tree. This change brings support for MT7530
switches on boards with such bootstrapping configuration where the switch
listens on a different PHY address than the hardcoded PHY address on the
driver, 31.
As described on the "MT7621 Programming Guide v0.4" document, the MT7530
switch and its PHYs can be configured to listen on the range of 7-12,
15-20, 23-28, and 31 and 0-4 PHY addresses.
There are operations where the switch PHY registers are used. For the PHY
address of the control PHY, transform the MT753X_CTRL_PHY_ADDR constant
into a macro and use it. The PHY address for the control PHY is 0 when the
switch listens on 31. In any other case, it is one greater than the PHY
address the switch listens on.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530-mdio.c | 28 ++++++++++++++--------------
drivers/net/dsa/mt7530.c | 35 ++++++++++++++++++++++-------------
drivers/net/dsa/mt7530.h | 4 +++-
3 files changed, 39 insertions(+), 28 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index fa3ee85a99c1..599b28c8a340 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -18,7 +18,8 @@
static int
mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
{
- struct mii_bus *bus = context;
+ struct mt7530_priv *priv = context;
+ struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
@@ -27,36 +28,35 @@ mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
lo = val & 0xffff;
hi = val >> 16;
- /* MT7530 uses 31 as the pseudo port */
- ret = bus->write(bus, 0x1f, 0x1f, page);
+ ret = bus->write(bus, priv->phy_addr, 0x1f, page);
if (ret < 0)
return ret;
- ret = bus->write(bus, 0x1f, r, lo);
+ ret = bus->write(bus, priv->phy_addr, r, lo);
if (ret < 0)
return ret;
- ret = bus->write(bus, 0x1f, 0x10, hi);
+ ret = bus->write(bus, priv->phy_addr, 0x10, hi);
return ret;
}
static int
mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
{
- struct mii_bus *bus = context;
+ struct mt7530_priv *priv = context;
+ struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
page = (reg >> 6) & 0x3ff;
r = (reg >> 2) & 0xf;
- /* MT7530 uses 31 as the pseudo port */
- ret = bus->write(bus, 0x1f, 0x1f, page);
+ ret = bus->write(bus, priv->phy_addr, 0x1f, page);
if (ret < 0)
return ret;
- lo = bus->read(bus, 0x1f, r);
- hi = bus->read(bus, 0x1f, 0x10);
+ lo = bus->read(bus, priv->phy_addr, r);
+ hi = bus->read(bus, priv->phy_addr, 0x10);
*val = (hi << 16) | (lo & 0xffff);
@@ -107,8 +107,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv)
mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
- regmap = devm_regmap_init(priv->dev,
- &mt7530_regmap_bus, priv->bus,
+ regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
mt7531_pcs_config[i]);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
@@ -153,6 +152,7 @@ mt7530_probe(struct mdio_device *mdiodev)
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;
+ priv->phy_addr = mdiodev->addr;
ret = mt7530_probe_common(priv);
if (ret)
@@ -203,8 +203,8 @@ mt7530_probe(struct mdio_device *mdiodev)
regmap_config->reg_stride = 4;
regmap_config->max_register = MT7530_CREV;
regmap_config->disable_locking = true;
- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
- priv->bus, regmap_config);
+ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
+ regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c0d0bce0b594..fefa6dd151fa 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -86,22 +86,26 @@ core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
int value, ret;
/* Write the desired MMD Devad */
- ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
- ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
- ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
/* Read the content of the MMD's selected register */
- value = bus->read(bus, 0, MII_MMD_DATA);
+ value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA);
return value;
err:
@@ -118,22 +122,26 @@ core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
int ret;
/* Write the desired MMD Devad */
- ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
- ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
- ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
/* Write the data into MMD's selected register */
- ret = bus->write(bus, 0, MII_MMD_DATA, data);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, data);
err:
if (ret < 0)
dev_err(&bus->dev,
@@ -2671,16 +2679,17 @@ mt7531_setup(struct dsa_switch *ds)
* phy_[read,write]_mmd_indirect is called, we provide our own
* mt7531_ind_mmd_phy_[read,write] to complete this function.
*/
- val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
+ val = mt7531_ind_c45_phy_read(priv,
+ MT753X_CTRL_PHY_ADDR(priv->phy_addr),
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
- mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
- CORE_PLL_GROUP4, val);
+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MDIO_MMD_VEND2, CORE_PLL_GROUP4, val);
/* Disable EEE advertisement on the switch PHYs. */
- for (i = MT753X_CTRL_PHY_ADDR;
- i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+ for (i = MT753X_CTRL_PHY_ADDR(priv->phy_addr);
+ i < MT753X_CTRL_PHY_ADDR(priv->phy_addr) + MT7530_NUM_PHYS; i++) {
mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
0);
}
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 585db03c0548..dc48715f6534 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -625,7 +625,7 @@ enum mt7531_clk_skew {
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
-#define MT753X_CTRL_PHY_ADDR 0
+#define MT753X_CTRL_PHY_ADDR(phy_addr) (phy_addr + 1 & 0x1f)
#define CORE_PLL_GROUP5 0x404
#define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff)
@@ -774,6 +774,7 @@ struct mt753x_info {
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
* @create_sgmii: Pointer to function creating SGMII PCS instance(s)
* @active_cpu_ports: Holding the active CPU ports
+ * @phy_addr: Holding the PHY address the switch listens on
*/
struct mt7530_priv {
struct device *dev;
@@ -800,6 +801,7 @@ struct mt7530_priv {
u32 irq_enable;
int (*create_sgmii)(struct mt7530_priv *priv);
u8 active_cpu_ports;
+ int phy_addr;
};
struct mt7530_hw_vlan_entry {
--
2.40.1
next prev parent reply other threads:[~2024-04-14 6:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-14 6:07 [PATCH net-next v2 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL
2024-04-14 6:07 ` Arınç ÜNAL [this message]
2024-04-14 6:07 ` [PATCH net-next v2 2/2] net: dsa: mt7530: simplify core operations Arınç ÜNAL
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v2-1-1a7649c4d3b6@arinc9.com \
--to=arinc.unal@arinc9.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bartel.eerdekens@constell8.be \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=erkin.bozoglu@xeront.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mithat.guner@xeront.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).