From: "Arınç ÜNAL" <arinc.unal@arinc9.com>
To: Daniel Golle <daniel@makrotopia.org>,
DENG Qingfang <dqfext@gmail.com>,
Sean Wang <sean.wang@mediatek.com>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Russell King <linux@armlinux.org.uk>
Cc: "Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
"Arınç ÜNAL" <arinc.unal@arinc9.com>
Subject: [PATCH net-next v2 07/15] net: dsa: mt7530: move MT753X_MTRAP operations for MT7530
Date: Mon, 22 Apr 2024 10:15:14 +0300 [thread overview]
Message-ID: <20240422-for-netnext-mt7530-improvements-4-v2-7-a75157ba76ad@arinc9.com> (raw)
In-Reply-To: <20240422-for-netnext-mt7530-improvements-4-v2-0-a75157ba76ad@arinc9.com>
On MT7530, the media-independent interfaces of port 5 and 6 are controlled
by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with
these bits only when the relevant port is being enabled or disabled. This
ensures that these ports will be disabled when they are not in use.
Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being
done on mt7530_setup().
Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only
on the appropriate case.
If PHY muxing is detected, clear MT7530_P5_DIS before calling
mt7530_setup_port5().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 606516206fb9..83436723cb16 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -880,8 +880,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
val = mt7530_read(priv, MT753X_MTRAP);
- val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
- val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
+ val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
switch (priv->p5_mode) {
/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
@@ -891,15 +890,13 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
case MUX_PHY_P4:
- val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
-
/* Setup the MAC by default for the cpu port */
mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
break;
/* GMAC5: P5 -> SoC MAC or external PHY */
default:
- val &= ~MT7530_P5_DIS;
+ val |= MT7530_P5_MAC_SEL;
break;
}
@@ -1193,6 +1190,14 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
mutex_unlock(&priv->reg_mutex);
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return 0;
+
+ if (port == 5)
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
+
return 0;
}
@@ -1211,6 +1216,14 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
PCR_MATRIX_CLR);
mutex_unlock(&priv->reg_mutex);
+
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ return;
+
+ if (port == 5)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ else if (port == 6)
+ mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
}
static int
@@ -2401,11 +2414,11 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
RD_TAP_MASK, RD_TAP(16));
- /* Enable port 6 */
- val = mt7530_read(priv, MT753X_MTRAP);
- val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
- val |= MT7530_CHG_TRAP;
- mt7530_write(priv, MT753X_MTRAP, val);
+ /* Allow modifying the trap and directly access PHY registers via the
+ * MDIO bus the switch is on.
+ */
+ mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
+ MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
mt7530_pll_setup(priv);
@@ -2488,8 +2501,11 @@ mt7530_setup(struct dsa_switch *ds)
break;
}
- if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
+ if (priv->p5_mode == MUX_PHY_P0 ||
+ priv->p5_mode == MUX_PHY_P4) {
+ mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
mt7530_setup_port5(ds, interface);
+ }
}
#ifdef CONFIG_GPIOLIB
--
2.40.1
next prev parent reply other threads:[~2024-04-22 7:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-22 7:15 [PATCH net-next v2 00/15] MT7530 DSA Subdriver Improvements Act IV Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 01/15] net: dsa: mt7530: disable EEE abilities on failure on MT7531 and MT7988 Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P() Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to mt753x_to_cpu_fw Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC, add MT7531_QRY_FFP Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and MT7530_MHWTRAP Arınç ÜNAL
2024-04-22 7:15 ` Arınç ÜNAL [this message]
2024-04-22 7:15 ` [PATCH net-next v2 08/15] net: dsa: mt7530: return mt7530_setup_mdio & mt7531_setup_common on error Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 09/15] net: dsa: mt7530: define MAC speed capabilities per switch model Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 10/15] net: dsa: mt7530: get rid of function sanity check Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P() Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 12/15] net: dsa: mt7530: get rid of mac_port_validate member of mt753x_info Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of MT7530_NUM_PORTS Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 14/15] net: dsa: mt7530: do not pass port variable to mt7531_rgmii_setup() Arınç ÜNAL
2024-04-22 7:15 ` [PATCH net-next v2 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE better Arınç ÜNAL
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240422-for-netnext-mt7530-improvements-4-v2-7-a75157ba76ad@arinc9.com \
--to=arinc.unal@arinc9.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=bartel.eerdekens@constell8.be \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=erkin.bozoglu@xeront.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=mithat.guner@xeront.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).