* Re: [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
[not found] <20240428060738.60843-1-guwen@linux.alibaba.com>
@ 2024-04-28 15:49 ` Cong Wang
2024-05-07 14:34 ` Wen Gu
0 siblings, 1 reply; 5+ messages in thread
From: Cong Wang @ 2024-04-28 15:49 UTC (permalink / raw
To: Wen Gu
Cc: wintera, twinkler, hca, gor, agordeev, davem, edumazet, kuba,
pabeni, wenjia, jaka, borntraeger, svens, alibuda, tonylu,
linux-kernel, linux-s390, netdev, bpf
On Sun, Apr 28, 2024 at 02:07:27PM +0800, Wen Gu wrote:
> This patch set acts as the second part of the new version of [1] (The first
> part can be referred from [2]), the updated things of this version are listed
> at the end.
>
> - Background
>
> SMC-D is now used in IBM z with ISM function to optimize network interconnect
> for intra-CPC communications. Inspired by this, we try to make SMC-D available
> on the non-s390 architecture through a software-implemented Emulated-ISM device,
> that is the loopback-ism device here, to accelerate inter-process or
> inter-containers communication within the same OS instance.
Just FYI:
Cilium has implemented this kind of shortcut with sockmap and sockops.
In fact, for intra-OS case, it is _very_ simple. The core code is less
than 50 lines. Please take a look here:
https://github.com/cilium/cilium/blob/v1.11.4/bpf/sockops/bpf_sockops.c
Like I mentioned in my LSF/MM/BPF proposal, we plan to implement
similiar eBPF things for inter-OS (aka VM) case.
More importantly, even LD_PRELOAD is not needed for this eBPF approach.
:)
Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
2024-04-28 15:49 ` [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism Cong Wang
@ 2024-05-07 14:34 ` Wen Gu
2024-05-07 16:10 ` Cong Wang
0 siblings, 1 reply; 5+ messages in thread
From: Wen Gu @ 2024-05-07 14:34 UTC (permalink / raw
To: Cong Wang
Cc: wintera, twinkler, hca, gor, agordeev, davem, edumazet, kuba,
pabeni, wenjia, jaka, borntraeger, svens, alibuda, tonylu,
linux-kernel, linux-s390, netdev, bpf
On 2024/4/28 23:49, Cong Wang wrote:
> On Sun, Apr 28, 2024 at 02:07:27PM +0800, Wen Gu wrote:
>> This patch set acts as the second part of the new version of [1] (The first
>> part can be referred from [2]), the updated things of this version are listed
>> at the end.
>>
>> - Background
>>
>> SMC-D is now used in IBM z with ISM function to optimize network interconnect
>> for intra-CPC communications. Inspired by this, we try to make SMC-D available
>> on the non-s390 architecture through a software-implemented Emulated-ISM device,
>> that is the loopback-ism device here, to accelerate inter-process or
>> inter-containers communication within the same OS instance.
>
> Just FYI:
>
> Cilium has implemented this kind of shortcut with sockmap and sockops.
> In fact, for intra-OS case, it is _very_ simple. The core code is less
> than 50 lines. Please take a look here:
> https://github.com/cilium/cilium/blob/v1.11.4/bpf/sockops/bpf_sockops.c
>
> Like I mentioned in my LSF/MM/BPF proposal, we plan to implement
> similiar eBPF things for inter-OS (aka VM) case.
>
> More importantly, even LD_PRELOAD is not needed for this eBPF approach.
> :)
>
> Thanks.
Hi, Cong. Thank you very much for the information. I learned about sockmap
before and from my perspective smcd loopback and sockmap each have their own
pros and cons.
The pros of smcd loopback is that it uses a standard process that defined
by RFC-7609 for negotiation, this CLC handshake helps smc correctly determine
whether the tcp connection should be upgraded no matter what middleware the
connection passes, e.g. through NAT. So we don't need to pay extra effort to
check whether the connection should be shortcut, unlike checking various policy
by bpf_sock_ops_ipv4() in sockmap. And since the handshake automatically select
different underlay devices for different scenarios (loopback-ism in intra-OS,
ISM in inter-VM of IBM z and RDMA in inter-VM of different hosts), various
scenarios can be covered through one smc protocol stack.
The cons of smcd loopback is also related to the CLC handshake, one more round
handshake may cause smc to perform worse than TCP in short-lived connection
scenarios. So we basically use smc upgrade in long-lived connection scenarios
and are exploring IPPROTO_SMC[1] to provide lossless fallback under adverse cases.
And we are also working on other upgrade ways than LD_PRELOAD, e.g. using eBPF
hook[2] with IPPROTO_SMC, to enhance the usability.
[1] https://lore.kernel.org/netdev/1708412505-34470-1-git-send-email-alibuda@linux.alibaba.com/
[2] https://lore.kernel.org/all/ac84be00f97072a46f8a72b4e2be46cbb7fa5053.1692147782.git.geliang.tang@suse.com/
Thanks!
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
2024-05-07 14:34 ` Wen Gu
@ 2024-05-07 16:10 ` Cong Wang
2024-05-08 3:48 ` Wen Gu
2024-05-08 6:39 ` Tony Lu
0 siblings, 2 replies; 5+ messages in thread
From: Cong Wang @ 2024-05-07 16:10 UTC (permalink / raw
To: Wen Gu
Cc: wintera, twinkler, hca, gor, agordeev, davem, edumazet, kuba,
pabeni, wenjia, jaka, borntraeger, svens, alibuda, tonylu,
linux-kernel, linux-s390, netdev, bpf
On Tue, May 07, 2024 at 10:34:09PM +0800, Wen Gu wrote:
>
>
> On 2024/4/28 23:49, Cong Wang wrote:
> > On Sun, Apr 28, 2024 at 02:07:27PM +0800, Wen Gu wrote:
> > > This patch set acts as the second part of the new version of [1] (The first
> > > part can be referred from [2]), the updated things of this version are listed
> > > at the end.
> > >
> > > - Background
> > >
> > > SMC-D is now used in IBM z with ISM function to optimize network interconnect
> > > for intra-CPC communications. Inspired by this, we try to make SMC-D available
> > > on the non-s390 architecture through a software-implemented Emulated-ISM device,
> > > that is the loopback-ism device here, to accelerate inter-process or
> > > inter-containers communication within the same OS instance.
> >
> > Just FYI:
> >
> > Cilium has implemented this kind of shortcut with sockmap and sockops.
> > In fact, for intra-OS case, it is _very_ simple. The core code is less
> > than 50 lines. Please take a look here:
> > https://github.com/cilium/cilium/blob/v1.11.4/bpf/sockops/bpf_sockops.c
> >
> > Like I mentioned in my LSF/MM/BPF proposal, we plan to implement
> > similiar eBPF things for inter-OS (aka VM) case.
> >
> > More importantly, even LD_PRELOAD is not needed for this eBPF approach.
> > :)
> >
> > Thanks.
>
> Hi, Cong. Thank you very much for the information. I learned about sockmap
> before and from my perspective smcd loopback and sockmap each have their own
> pros and cons.
>
> The pros of smcd loopback is that it uses a standard process that defined
> by RFC-7609 for negotiation, this CLC handshake helps smc correctly determine
> whether the tcp connection should be upgraded no matter what middleware the
> connection passes, e.g. through NAT. So we don't need to pay extra effort to
> check whether the connection should be shortcut, unlike checking various policy
> by bpf_sock_ops_ipv4() in sockmap. And since the handshake automatically select
> different underlay devices for different scenarios (loopback-ism in intra-OS,
> ISM in inter-VM of IBM z and RDMA in inter-VM of different hosts), various
> scenarios can be covered through one smc protocol stack.
>
> The cons of smcd loopback is also related to the CLC handshake, one more round
> handshake may cause smc to perform worse than TCP in short-lived connection
> scenarios. So we basically use smc upgrade in long-lived connection scenarios
> and are exploring IPPROTO_SMC[1] to provide lossless fallback under adverse cases.
You don't have to bother RFC's, since you could define your own TCP
options. And, the eBPF approach could also use TCP options whenver
needed. Cilium probably does not use them only because for intra-OS case
it is too simple to bother TCP options, as everything can be shared via a
shared socketmap.
In reality, the setup is not that complex. In many cases we already know
whether we have VM or container (or mixed) setup before we develop (as
a part of requirement gathering). And they rarely change.
Taking one step back, the discovery of VM or container or loopback cases
could be done via TCP options too, to deal with complex cases like
KataContainer. There is no reason to bother RFC's, maybe except the RDMA
case.
In fact, this is an advantage to me. We don't need to argue with anyone
on our own TCP option or eBPF code, we don't even have to share our own
eBPF code here.
>
> And we are also working on other upgrade ways than LD_PRELOAD, e.g. using eBPF
> hook[2] with IPPROTO_SMC, to enhance the usability.
That is wrong IMHO, because basically it just overwrites kernel modules
with eBPF, not how eBPF is supposed to be used. IOW, you could not use
it at all without SMC/MPTCP modules.
BTW, this approach does not work for kernel sockets, because you only
hook __sys_socket().
Of course, for sockmap or sockops, they could be used independently for
any other purposes. I hope now you could see the flexiblities of eBPF
over kernel modules.
Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
2024-05-07 16:10 ` Cong Wang
@ 2024-05-08 3:48 ` Wen Gu
2024-05-08 6:39 ` Tony Lu
1 sibling, 0 replies; 5+ messages in thread
From: Wen Gu @ 2024-05-08 3:48 UTC (permalink / raw
To: Cong Wang
Cc: wintera, twinkler, hca, gor, agordeev, davem, edumazet, kuba,
pabeni, wenjia, jaka, borntraeger, svens, alibuda, tonylu,
linux-kernel, linux-s390, netdev, bpf
On 2024/5/8 00:10, Cong Wang wrote:
> On Tue, May 07, 2024 at 10:34:09PM +0800, Wen Gu wrote:
>>
>>
>> On 2024/4/28 23:49, Cong Wang wrote:
>>> On Sun, Apr 28, 2024 at 02:07:27PM +0800, Wen Gu wrote:
>>>> This patch set acts as the second part of the new version of [1] (The first
>>>> part can be referred from [2]), the updated things of this version are listed
>>>> at the end.
>>>>
>>>> - Background
>>>>
>>>> SMC-D is now used in IBM z with ISM function to optimize network interconnect
>>>> for intra-CPC communications. Inspired by this, we try to make SMC-D available
>>>> on the non-s390 architecture through a software-implemented Emulated-ISM device,
>>>> that is the loopback-ism device here, to accelerate inter-process or
>>>> inter-containers communication within the same OS instance.
>>>
>>> Just FYI:
>>>
>>> Cilium has implemented this kind of shortcut with sockmap and sockops.
>>> In fact, for intra-OS case, it is _very_ simple. The core code is less
>>> than 50 lines. Please take a look here:
>>> https://github.com/cilium/cilium/blob/v1.11.4/bpf/sockops/bpf_sockops.c
>>>
>>> Like I mentioned in my LSF/MM/BPF proposal, we plan to implement
>>> similiar eBPF things for inter-OS (aka VM) case.
>>>
>>> More importantly, even LD_PRELOAD is not needed for this eBPF approach.
>>> :)
>>>
>>> Thanks.
>>
>> Hi, Cong. Thank you very much for the information. I learned about sockmap
>> before and from my perspective smcd loopback and sockmap each have their own
>> pros and cons.
>>
>> The pros of smcd loopback is that it uses a standard process that defined
>> by RFC-7609 for negotiation, this CLC handshake helps smc correctly determine
>> whether the tcp connection should be upgraded no matter what middleware the
>> connection passes, e.g. through NAT. So we don't need to pay extra effort to
>> check whether the connection should be shortcut, unlike checking various policy
>> by bpf_sock_ops_ipv4() in sockmap. And since the handshake automatically select
>> different underlay devices for different scenarios (loopback-ism in intra-OS,
>> ISM in inter-VM of IBM z and RDMA in inter-VM of different hosts), various
>> scenarios can be covered through one smc protocol stack.
>>
>> The cons of smcd loopback is also related to the CLC handshake, one more round
>> handshake may cause smc to perform worse than TCP in short-lived connection
>> scenarios. So we basically use smc upgrade in long-lived connection scenarios
>> and are exploring IPPROTO_SMC[1] to provide lossless fallback under adverse cases.
>
> You don't have to bother RFC's, since you could define your own TCP
> options. And, the eBPF approach could also use TCP options whenver
> needed. Cilium probably does not use them only because for intra-OS case
> it is too simple to bother TCP options, as everything can be shared via a
> shared socketmap.
>
> In reality, the setup is not that complex. In many cases we already know
> whether we have VM or container (or mixed) setup before we develop (as
> a part of requirement gathering). And they rarely change.
>
> Taking one step back, the discovery of VM or container or loopback cases
> could be done via TCP options too, to deal with complex cases like
> KataContainer. There is no reason to bother RFC's, maybe except the RDMA
> case.
>
> In fact, this is an advantage to me. We don't need to argue with anyone
> on our own TCP option or eBPF code, we don't even have to share our own
> eBPF code here.
>
Private TCP option could be a historical burden and a risk for compatibility,
so IMHO it doesn't work, at least for SMC. Besides, the smc handshake process
I mentioned is not just about TCP option, that is the first step. There are
another 3-way CLC handshake to choose right underlay for different cases
or safelly fallback to TCP, keep users out of bother. Lastly, the process was
designed for different cases and smcd loopback is one of the whole picture,
so simplicity of intra-OS case does not mean the existing handshake is meaningless
nor smcd loopback should give up using existing process but follow sockmap.
>>
>> And we are also working on other upgrade ways than LD_PRELOAD, e.g. using eBPF
>> hook[2] with IPPROTO_SMC, to enhance the usability.
>
> That is wrong IMHO, because basically it just overwrites kernel modules
> with eBPF, not how eBPF is supposed to be used. IOW, you could not use
> it at all without SMC/MPTCP modules.
>
Yes, it expects to be used for SMC/MPTCP modules.
> BTW, this approach does not work for kernel sockets, because you only
> hook __sys_socket().
>
In fact the purpose of this is mainly to transparently upgrade applications'
TCP sockets, so kernel sockets are not the target.
> Of course, for sockmap or sockops, they could be used independently for
> any other purposes. I hope now you could see the flexiblities of eBPF
> over kernel modules.
>
Yes, I agree with the pros of eBPF way, like flexiblities you mentioned.
As I said above, from my perspective they both have their own pros and cons.
> Thanks.
Thanks!
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism
2024-05-07 16:10 ` Cong Wang
2024-05-08 3:48 ` Wen Gu
@ 2024-05-08 6:39 ` Tony Lu
1 sibling, 0 replies; 5+ messages in thread
From: Tony Lu @ 2024-05-08 6:39 UTC (permalink / raw
To: Cong Wang
Cc: Wen Gu, wintera, twinkler, hca, gor, agordeev, davem, edumazet,
kuba, pabeni, wenjia, jaka, borntraeger, svens, alibuda,
linux-kernel, linux-s390, netdev, bpf
On Tue, May 07, 2024 at 09:10:41AM -0700, Cong Wang wrote:
> On Tue, May 07, 2024 at 10:34:09PM +0800, Wen Gu wrote:
> >
> >
> > On 2024/4/28 23:49, Cong Wang wrote:
> > > On Sun, Apr 28, 2024 at 02:07:27PM +0800, Wen Gu wrote:
> > > > This patch set acts as the second part of the new version of [1] (The first
> > > > part can be referred from [2]), the updated things of this version are listed
> > > > at the end.
> > > >
> > > > - Background
> > > >
> > > > SMC-D is now used in IBM z with ISM function to optimize network interconnect
> > > > for intra-CPC communications. Inspired by this, we try to make SMC-D available
> > > > on the non-s390 architecture through a software-implemented Emulated-ISM device,
> > > > that is the loopback-ism device here, to accelerate inter-process or
> > > > inter-containers communication within the same OS instance.
> > >
> > > Just FYI:
> > >
> > > Cilium has implemented this kind of shortcut with sockmap and sockops.
> > > In fact, for intra-OS case, it is _very_ simple. The core code is less
> > > than 50 lines. Please take a look here:
> > > https://github.com/cilium/cilium/blob/v1.11.4/bpf/sockops/bpf_sockops.c
> > >
> > > Like I mentioned in my LSF/MM/BPF proposal, we plan to implement
> > > similiar eBPF things for inter-OS (aka VM) case.
> > >
> > > More importantly, even LD_PRELOAD is not needed for this eBPF approach.
> > > :)
> > >
> > > Thanks.
> >
> > Hi, Cong. Thank you very much for the information. I learned about sockmap
> > before and from my perspective smcd loopback and sockmap each have their own
> > pros and cons.
> >
> > The pros of smcd loopback is that it uses a standard process that defined
> > by RFC-7609 for negotiation, this CLC handshake helps smc correctly determine
> > whether the tcp connection should be upgraded no matter what middleware the
> > connection passes, e.g. through NAT. So we don't need to pay extra effort to
> > check whether the connection should be shortcut, unlike checking various policy
> > by bpf_sock_ops_ipv4() in sockmap. And since the handshake automatically select
> > different underlay devices for different scenarios (loopback-ism in intra-OS,
> > ISM in inter-VM of IBM z and RDMA in inter-VM of different hosts), various
> > scenarios can be covered through one smc protocol stack.
> >
> > The cons of smcd loopback is also related to the CLC handshake, one more round
> > handshake may cause smc to perform worse than TCP in short-lived connection
> > scenarios. So we basically use smc upgrade in long-lived connection scenarios
> > and are exploring IPPROTO_SMC[1] to provide lossless fallback under adverse cases.
>
> You don't have to bother RFC's, since you could define your own TCP
> options. And, the eBPF approach could also use TCP options whenver
> needed. Cilium probably does not use them only because for intra-OS case
> it is too simple to bother TCP options, as everything can be shared via a
> shared socketmap.
You can define and use any private TCP options but that is not the right
way for a inter-host network protocol, especially for different subnet,
arch or OS (Linux, z/OS and so on). As the essence of communication
between any two parties, everyone need to abide by the same standards. I
also have to admit that SMC is a standard protocol and we need to extend
the protocol spec through standard and appropriate methods, such as IETF
RFC and protocol white paper. If it is only a temporary acceleration
solution used on a small scale, this restriction are not required.
>
> In reality, the setup is not that complex. In many cases we already know
> whether we have VM or container (or mixed) setup before we develop (as
> a part of requirement gathering). And they rarely change.
To running SMC in nowadays cloud infra, TCP handshake is not the most
efficient but the most practical way, for we can't touch the infra
under VM, even don't know what kind of environment.
>
> Taking one step back, the discovery of VM or container or loopback cases
> could be done via TCP options too, to deal with complex cases like
> KataContainer. There is no reason to bother RFC's, maybe except the RDMA
> case.
>
> In fact, this is an advantage to me. We don't need to argue with anyone
> on our own TCP option or eBPF code, we don't even have to share our own
> eBPF code here.
Actually I am looking forward to learn about the whole way of eBPF. Both
SMC and eBPF are trying to solve this issue in their own view. I don't
think one must be replaced by another one for now. To define these
inter/intra-OS/host scene and captivate interest are more important, I
think, than seeking a one-size-fits-all solution for the present time.
>
> >
> > And we are also working on other upgrade ways than LD_PRELOAD, e.g. using eBPF
> > hook[2] with IPPROTO_SMC, to enhance the usability.
>
> That is wrong IMHO, because basically it just overwrites kernel modules
> with eBPF, not how eBPF is supposed to be used. IOW, you could not use
> it at all without SMC/MPTCP modules.
The eBPF hookers are considering as a part of SMC modules. It should not
be used out of SMC module for now at least.
>
> BTW, this approach does not work for kernel sockets, because you only
> hook __sys_socket().
Yep, SMC should not replace kernel socket for now. In our scenario,
almost all applications suitable for SMC only run in user space.
Thanks,
Tony Lu
>
> Of course, for sockmap or sockops, they could be used independently for
> any other purposes. I hope now you could see the flexiblities of eBPF
> over kernel modules.
>
> Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-05-08 6:39 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20240428060738.60843-1-guwen@linux.alibaba.com>
2024-04-28 15:49 ` [PATCH net-next v7 00/11] net/smc: SMC intra-OS shortcut with loopback-ism Cong Wang
2024-05-07 14:34 ` Wen Gu
2024-05-07 16:10 ` Cong Wang
2024-05-08 3:48 ` Wen Gu
2024-05-08 6:39 ` Tony Lu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).