* [PATCH v4 0/4] drm/msm: Add display support for X1E80100
@ 2024-02-20 14:15 Abel Vesa
2024-02-20 14:15 ` [PATCH v4 1/4] dt-bindings: display/msm: Document the DPU " Abel Vesa
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Abel Vesa @ 2024-02-20 14:15 UTC (permalink / raw
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
Marijn Suijten, David Airlie, Daniel Vetter, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Neil Armstrong, Rob Herring
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Abel Vesa, Krzysztof Kozlowski
This patchset adds support for display for X1E80100.
The support for embedded DisplayPort on this platform will not
be enabled using the connetor type from driver match data,
but through some 'is-edp' property via DT. This subsequent work
will be part of a separate patchset.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v4:
- Dropped all references to clocks IDs from MDSS schema, along with all
headers includes, and replaced with bogus phandles, all to avoid
dependecies.
- Added Krzysztof's R-b tag to DPU schema patch.
- Link to v3: https://lore.kernel.org/r/20240216-x1e80100-display-v3-0-28b1c33ac8c0@linaro.org
Changes in v3:
- Added Dmitry's R-b tag to the mdss patch
- Swapped order of first two patches, as suggested by Rob
- Added "additionalProperties: true" to all pattern properties in MDSS
schema
- Link to v2: https://lore.kernel.org/r/20240214-x1e80100-display-v2-0-cf05ba887453@linaro.org
Changes in v2:
- Dropped the 4th patch:
"drm/msm/dp: Try looking for link-frequencies into the port@0's endpoint first"
- Fixed the qcom,x1e80100-mdss schema by including some missing headers
in the example
- Added TODO comment for reg_bus_bw
- Switched to SDMA features mask
- Added Krzysztof's R-b tag to mdss schema patch
- Added Dmitry's R-b tag to the dpu patch
- Link to v1: https://lore.kernel.org/r/20240129-x1e80100-display-v1-0-0d9eb8254df0@linaro.org
---
Abel Vesa (4):
dt-bindings: display/msm: Document the DPU for X1E80100
dt-bindings: display/msm: Document MDSS on X1E80100
drm/msm: mdss: Add X1E80100 support
drm/msm/dpu: Add X1E80100 support
.../bindings/display/msm/qcom,sm8650-dpu.yaml | 4 +-
.../bindings/display/msm/qcom,x1e80100-mdss.yaml | 251 ++++++++++++
.../drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 449 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
drivers/gpu/drm/msm/msm_mdss.c | 13 +
7 files changed, 720 insertions(+), 1 deletion(-)
---
base-commit: 2d5c7b7eb345249cb34d42cbc2b97b4c57ea944e
change-id: 20231201-x1e80100-display-a46324400baf
Best regards,
--
Abel Vesa <abel.vesa@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 1/4] dt-bindings: display/msm: Document the DPU for X1E80100
2024-02-20 14:15 [PATCH v4 0/4] drm/msm: Add display support for X1E80100 Abel Vesa
@ 2024-02-20 14:15 ` Abel Vesa
2024-02-20 14:15 ` [PATCH v4 2/4] dt-bindings: display/msm: Document MDSS on X1E80100 Abel Vesa
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2024-02-20 14:15 UTC (permalink / raw
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
Marijn Suijten, David Airlie, Daniel Vetter, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Neil Armstrong, Rob Herring
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Abel Vesa, Krzysztof Kozlowski
Document the DPU for Qualcomm X1E80100 platform in the SM8650 schema, as
they are similar.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
index a01d15a03317..c4087cc5abbd 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
- const: qcom,sm8650-dpu
+ enum:
+ - qcom,sm8650-dpu
+ - qcom,x1e80100-dpu
reg:
items:
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 2/4] dt-bindings: display/msm: Document MDSS on X1E80100
2024-02-20 14:15 [PATCH v4 0/4] drm/msm: Add display support for X1E80100 Abel Vesa
2024-02-20 14:15 ` [PATCH v4 1/4] dt-bindings: display/msm: Document the DPU " Abel Vesa
@ 2024-02-20 14:15 ` Abel Vesa
2024-02-20 14:15 ` [PATCH v4 3/4] drm/msm: mdss: Add X1E80100 support Abel Vesa
2024-02-20 14:15 ` [PATCH v4 4/4] drm/msm/dpu: " Abel Vesa
3 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2024-02-20 14:15 UTC (permalink / raw
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
Marijn Suijten, David Airlie, Daniel Vetter, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Neil Armstrong, Rob Herring
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Abel Vesa, Krzysztof Kozlowski
Document the MDSS hardware found on the Qualcomm X1E80100 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../bindings/display/msm/qcom,x1e80100-mdss.yaml | 251 +++++++++++++++++++++
1 file changed, 251 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 000000000000..3b01a0e47333
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+ - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+ X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,x1e80100-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 3
+
+ interconnect-names:
+ maxItems: 3
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,x1e80100-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,x1e80100-dp
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ const: qcom,x1e80100-dp-phy
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+ #include <dt-bindings/phy/phy-qcom-qmp.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,x1e80100-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+ resets = <&dispcc_core_bcr>;
+
+ power-domains = <&dispcc_gdsc>;
+
+ clocks = <&dispcc_ahb_clk>,
+ <&gcc_disp_hf_axi_clk>,
+ <&dispcc_mdp_clk>;
+ clock-names = "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,x1e80100-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc_axi_clk>,
+ <&dispcc_ahb_clk>,
+ <&dispcc_mdp_lut_clk>,
+ <&dispcc_mdp_clk>,
+ <&dispcc_mdp_vsync_clk>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc_mdp_vsync_clk>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,x1e80100-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0xae91000 0 0x400>,
+ <0 0xae91400 0 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc_mdss_ahb_clk>,
+ <&dispcc_dptx0_aux_clk>,
+ <&dispcc_dptx0_link_clk>,
+ <&dispcc_dptx0_link_intf_clk>,
+ <&dispcc_dptx0_pixel0_clk>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+ <&dispcc_mdss_dptx0_pixel0_clk_src>;
+ assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&mdss_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dp0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 3/4] drm/msm: mdss: Add X1E80100 support
2024-02-20 14:15 [PATCH v4 0/4] drm/msm: Add display support for X1E80100 Abel Vesa
2024-02-20 14:15 ` [PATCH v4 1/4] dt-bindings: display/msm: Document the DPU " Abel Vesa
2024-02-20 14:15 ` [PATCH v4 2/4] dt-bindings: display/msm: Document MDSS on X1E80100 Abel Vesa
@ 2024-02-20 14:15 ` Abel Vesa
2024-02-20 14:15 ` [PATCH v4 4/4] drm/msm/dpu: " Abel Vesa
3 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2024-02-20 14:15 UTC (permalink / raw
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
Marijn Suijten, David Airlie, Daniel Vetter, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Neil Armstrong, Rob Herring
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Abel Vesa
Add support for MDSS on X1E80100.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
drivers/gpu/drm/msm/msm_mdss.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 65657230bbff..fab6ad4e5107 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -687,6 +687,18 @@ static const struct msm_mdss_data sm8550_data = {
.macrotile_mode = 1,
.reg_bus_bw = 57000,
};
+
+static const struct msm_mdss_data x1e80100_data = {
+ .ubwc_enc_version = UBWC_4_0,
+ .ubwc_dec_version = UBWC_4_3,
+ .ubwc_swizzle = 6,
+ .ubwc_static = 1,
+ /* TODO: highest_bank_bit = 2 for LP_DDR4 */
+ .highest_bank_bit = 3,
+ .macrotile_mode = 1,
+ /* TODO: Add reg_bus_bw with real value */
+};
+
static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,mdss" },
{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
@@ -707,6 +719,7 @@ static const struct of_device_id mdss_dt_match[] = {
{ .compatible = "qcom,sm8450-mdss", .data = &sm8350_data },
{ .compatible = "qcom,sm8550-mdss", .data = &sm8550_data },
{ .compatible = "qcom,sm8650-mdss", .data = &sm8550_data},
+ { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data},
{}
};
MODULE_DEVICE_TABLE(of, mdss_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 4/4] drm/msm/dpu: Add X1E80100 support
2024-02-20 14:15 [PATCH v4 0/4] drm/msm: Add display support for X1E80100 Abel Vesa
` (2 preceding siblings ...)
2024-02-20 14:15 ` [PATCH v4 3/4] drm/msm: mdss: Add X1E80100 support Abel Vesa
@ 2024-02-20 14:15 ` Abel Vesa
3 siblings, 0 replies; 5+ messages in thread
From: Abel Vesa @ 2024-02-20 14:15 UTC (permalink / raw
To: Rob Clark, Abhinav Kumar, Dmitry Baryshkov, Sean Paul,
Marijn Suijten, David Airlie, Daniel Vetter, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Neil Armstrong, Rob Herring
Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
Abel Vesa
Add definitions for the display hardware used on the Qualcomm X1E80100
platform.
Co-developed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 449 +++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 +
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
4 files changed, 453 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h
new file mode 100644
index 000000000000..9a9f7092c526
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h
@@ -0,0 +1,449 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef _DPU_9_2_X1E80100_H
+#define _DPU_9_2_X1E80100_H
+
+static const struct dpu_caps x1e80100_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 5120,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_mdp_cfg x1e80100_mdp = {
+ .name = "top_0",
+ .base = 0, .len = 0x494,
+ .features = BIT(DPU_MDP_PERIPH_0_REMOVED),
+ .clk_ctrls = {
+ [DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+ },
+};
+
+/* FIXME: get rid of DPU_CTL_SPLIT_DISPLAY in favour of proper ACTIVE_CTL support */
+static const struct dpu_ctl_cfg x1e80100_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x15000, .len = 0x290,
+ .features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+ }, {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x16000, .len = 0x290,
+ .features = CTL_SM8550_MASK | BIT(DPU_CTL_SPLIT_DISPLAY),
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+ }, {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x17000, .len = 0x290,
+ .features = CTL_SM8550_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+ }, {
+ .name = "ctl_3", .id = CTL_3,
+ .base = 0x18000, .len = 0x290,
+ .features = CTL_SM8550_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+ }, {
+ .name = "ctl_4", .id = CTL_4,
+ .base = 0x19000, .len = 0x290,
+ .features = CTL_SM8550_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+ }, {
+ .name = "ctl_5", .id = CTL_5,
+ .base = 0x1a000, .len = 0x290,
+ .features = CTL_SM8550_MASK,
+ .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+ },
+};
+
+static const struct dpu_sspp_cfg x1e80100_sspp[] = {
+ {
+ .name = "sspp_0", .id = SSPP_VIG0,
+ .base = 0x4000, .len = 0x344,
+ .features = VIG_SDM845_MASK_SDMA,
+ .sblk = &dpu_vig_sblk_qseed3_3_3,
+ .xin_id = 0,
+ .type = SSPP_TYPE_VIG,
+ }, {
+ .name = "sspp_1", .id = SSPP_VIG1,
+ .base = 0x6000, .len = 0x344,
+ .features = VIG_SDM845_MASK_SDMA,
+ .sblk = &dpu_vig_sblk_qseed3_3_3,
+ .xin_id = 4,
+ .type = SSPP_TYPE_VIG,
+ }, {
+ .name = "sspp_2", .id = SSPP_VIG2,
+ .base = 0x8000, .len = 0x344,
+ .features = VIG_SDM845_MASK_SDMA,
+ .sblk = &dpu_vig_sblk_qseed3_3_3,
+ .xin_id = 8,
+ .type = SSPP_TYPE_VIG,
+ }, {
+ .name = "sspp_3", .id = SSPP_VIG3,
+ .base = 0xa000, .len = 0x344,
+ .features = VIG_SDM845_MASK_SDMA,
+ .sblk = &dpu_vig_sblk_qseed3_3_3,
+ .xin_id = 12,
+ .type = SSPP_TYPE_VIG,
+ }, {
+ .name = "sspp_8", .id = SSPP_DMA0,
+ .base = 0x24000, .len = 0x344,
+ .features = DMA_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 1,
+ .type = SSPP_TYPE_DMA,
+ }, {
+ .name = "sspp_9", .id = SSPP_DMA1,
+ .base = 0x26000, .len = 0x344,
+ .features = DMA_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 5,
+ .type = SSPP_TYPE_DMA,
+ }, {
+ .name = "sspp_10", .id = SSPP_DMA2,
+ .base = 0x28000, .len = 0x344,
+ .features = DMA_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 9,
+ .type = SSPP_TYPE_DMA,
+ }, {
+ .name = "sspp_11", .id = SSPP_DMA3,
+ .base = 0x2a000, .len = 0x344,
+ .features = DMA_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 13,
+ .type = SSPP_TYPE_DMA,
+ }, {
+ .name = "sspp_12", .id = SSPP_DMA4,
+ .base = 0x2c000, .len = 0x344,
+ .features = DMA_CURSOR_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 14,
+ .type = SSPP_TYPE_DMA,
+ }, {
+ .name = "sspp_13", .id = SSPP_DMA5,
+ .base = 0x2e000, .len = 0x344,
+ .features = DMA_CURSOR_SDM845_MASK_SDMA,
+ .sblk = &dpu_dma_sblk,
+ .xin_id = 15,
+ .type = SSPP_TYPE_DMA,
+ },
+};
+
+static const struct dpu_lm_cfg x1e80100_lm[] = {
+ {
+ .name = "lm_0", .id = LM_0,
+ .base = 0x44000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_1,
+ .pingpong = PINGPONG_0,
+ .dspp = DSPP_0,
+ }, {
+ .name = "lm_1", .id = LM_1,
+ .base = 0x45000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_0,
+ .pingpong = PINGPONG_1,
+ .dspp = DSPP_1,
+ }, {
+ .name = "lm_2", .id = LM_2,
+ .base = 0x46000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_3,
+ .pingpong = PINGPONG_2,
+ }, {
+ .name = "lm_3", .id = LM_3,
+ .base = 0x47000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_2,
+ .pingpong = PINGPONG_3,
+ }, {
+ .name = "lm_4", .id = LM_4,
+ .base = 0x48000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_5,
+ .pingpong = PINGPONG_4,
+ }, {
+ .name = "lm_5", .id = LM_5,
+ .base = 0x49000, .len = 0x320,
+ .features = MIXER_SDM845_MASK,
+ .sblk = &sdm845_lm_sblk,
+ .lm_pair = LM_4,
+ .pingpong = PINGPONG_5,
+ },
+};
+
+static const struct dpu_dspp_cfg x1e80100_dspp[] = {
+ {
+ .name = "dspp_0", .id = DSPP_0,
+ .base = 0x54000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ }, {
+ .name = "dspp_1", .id = DSPP_1,
+ .base = 0x56000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ }, {
+ .name = "dspp_2", .id = DSPP_2,
+ .base = 0x58000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ }, {
+ .name = "dspp_3", .id = DSPP_3,
+ .base = 0x5a000, .len = 0x1800,
+ .features = DSPP_SC7180_MASK,
+ .sblk = &sdm845_dspp_sblk,
+ },
+};
+
+static const struct dpu_pingpong_cfg x1e80100_pp[] = {
+ {
+ .name = "pingpong_0", .id = PINGPONG_0,
+ .base = 0x69000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_0,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+ }, {
+ .name = "pingpong_1", .id = PINGPONG_1,
+ .base = 0x6a000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_0,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+ }, {
+ .name = "pingpong_2", .id = PINGPONG_2,
+ .base = 0x6b000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_1,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+ }, {
+ .name = "pingpong_3", .id = PINGPONG_3,
+ .base = 0x6c000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_1,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+ }, {
+ .name = "pingpong_4", .id = PINGPONG_4,
+ .base = 0x6d000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_2,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+ }, {
+ .name = "pingpong_5", .id = PINGPONG_5,
+ .base = 0x6e000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_2,
+ .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+ }, {
+ .name = "pingpong_6", .id = PINGPONG_6,
+ .base = 0x66000, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_3,
+ }, {
+ .name = "pingpong_7", .id = PINGPONG_7,
+ .base = 0x66400, .len = 0,
+ .features = BIT(DPU_PINGPONG_DITHER),
+ .sblk = &sc7280_pp_sblk,
+ .merge_3d = MERGE_3D_3,
+ },
+};
+
+static const struct dpu_merge_3d_cfg x1e80100_merge_3d[] = {
+ {
+ .name = "merge_3d_0", .id = MERGE_3D_0,
+ .base = 0x4e000, .len = 0x8,
+ }, {
+ .name = "merge_3d_1", .id = MERGE_3D_1,
+ .base = 0x4f000, .len = 0x8,
+ }, {
+ .name = "merge_3d_2", .id = MERGE_3D_2,
+ .base = 0x50000, .len = 0x8,
+ }, {
+ .name = "merge_3d_3", .id = MERGE_3D_3,
+ .base = 0x66700, .len = 0x8,
+ },
+};
+
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg x1e80100_dsc[] = {
+ {
+ .name = "dce_0_0", .id = DSC_0,
+ .base = 0x80000, .len = 0x4,
+ .features = BIT(DPU_DSC_HW_REV_1_2),
+ .sblk = &dsc_sblk_0,
+ }, {
+ .name = "dce_0_1", .id = DSC_1,
+ .base = 0x80000, .len = 0x4,
+ .features = BIT(DPU_DSC_HW_REV_1_2),
+ .sblk = &dsc_sblk_1,
+ }, {
+ .name = "dce_1_0", .id = DSC_2,
+ .base = 0x81000, .len = 0x4,
+ .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+ .sblk = &dsc_sblk_0,
+ }, {
+ .name = "dce_1_1", .id = DSC_3,
+ .base = 0x81000, .len = 0x4,
+ .features = BIT(DPU_DSC_HW_REV_1_2) | BIT(DPU_DSC_NATIVE_42x_EN),
+ .sblk = &dsc_sblk_1,
+ },
+};
+
+static const struct dpu_wb_cfg x1e80100_wb[] = {
+ {
+ .name = "wb_2", .id = WB_2,
+ .base = 0x65000, .len = 0x2c8,
+ .features = WB_SM8250_MASK,
+ .format_list = wb2_formats_rgb,
+ .num_formats = ARRAY_SIZE(wb2_formats_rgb),
+ .xin_id = 6,
+ .vbif_idx = VBIF_RT,
+ .maxlinewidth = 4096,
+ .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+ },
+};
+
+static const struct dpu_intf_cfg x1e80100_intf[] = {
+ {
+ .name = "intf_0", .id = INTF_0,
+ .base = 0x34000, .len = 0x280,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_0,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+ }, {
+ .name = "intf_1", .id = INTF_1,
+ .base = 0x35000, .len = 0x300,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DSI,
+ .controller_id = MSM_DSI_CONTROLLER_0,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+ .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+ }, {
+ .name = "intf_2", .id = INTF_2,
+ .base = 0x36000, .len = 0x300,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DSI,
+ .controller_id = MSM_DSI_CONTROLLER_1,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
+ .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
+ }, {
+ .name = "intf_3", .id = INTF_3,
+ .base = 0x37000, .len = 0x280,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_1,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+ }, {
+ .name = "intf_4", .id = INTF_4,
+ .base = 0x38000, .len = 0x280,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_2,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21),
+ }, {
+ .name = "intf_5", .id = INTF_5,
+ .base = 0x39000, .len = 0x280,
+ .features = INTF_SC7280_MASK,
+ .type = INTF_DP,
+ .controller_id = MSM_DP_CONTROLLER_3,
+ .prog_fetch_lines_worst_case = 24,
+ .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 22),
+ .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 23),
+ },
+};
+
+static const struct dpu_perf_cfg x1e80100_perf_data = {
+ .max_bw_low = 13600000,
+ .max_bw_high = 18200000,
+ .min_core_ib = 2500000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 800000,
+ .min_prefill_lines = 35,
+ /* FIXME: lut tables */
+ .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+ .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+ .clk_inefficiency_factor = 105,
+ .bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version x1e80100_mdss_ver = {
+ .core_major_ver = 9,
+ .core_minor_ver = 2,
+};
+
+const struct dpu_mdss_cfg dpu_x1e80100_cfg = {
+ .mdss_ver = &x1e80100_mdss_ver,
+ .caps = &x1e80100_dpu_caps,
+ .mdp = &x1e80100_mdp,
+ .ctl_count = ARRAY_SIZE(x1e80100_ctl),
+ .ctl = x1e80100_ctl,
+ .sspp_count = ARRAY_SIZE(x1e80100_sspp),
+ .sspp = x1e80100_sspp,
+ .mixer_count = ARRAY_SIZE(x1e80100_lm),
+ .mixer = x1e80100_lm,
+ .dspp_count = ARRAY_SIZE(x1e80100_dspp),
+ .dspp = x1e80100_dspp,
+ .pingpong_count = ARRAY_SIZE(x1e80100_pp),
+ .pingpong = x1e80100_pp,
+ .dsc_count = ARRAY_SIZE(x1e80100_dsc),
+ .dsc = x1e80100_dsc,
+ .merge_3d_count = ARRAY_SIZE(x1e80100_merge_3d),
+ .merge_3d = x1e80100_merge_3d,
+ .wb_count = ARRAY_SIZE(x1e80100_wb),
+ .wb = x1e80100_wb,
+ .intf_count = ARRAY_SIZE(x1e80100_intf),
+ .intf = x1e80100_intf,
+ .vbif_count = ARRAY_SIZE(sm8550_vbif),
+ .vbif = sm8550_vbif,
+ .perf = &x1e80100_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index ccbee0f40ad7..f2b6eac7601d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -705,4 +705,6 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
#include "catalog/dpu_9_0_sm8550.h"
+#include "catalog/dpu_9_2_x1e80100.h"
+
#include "catalog/dpu_10_0_sm8650.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index a54c135e3147..d1aef778340b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -851,5 +851,6 @@ extern const struct dpu_mdss_cfg dpu_sc8280xp_cfg;
extern const struct dpu_mdss_cfg dpu_sm8450_cfg;
extern const struct dpu_mdss_cfg dpu_sm8550_cfg;
extern const struct dpu_mdss_cfg dpu_sm8650_cfg;
+extern const struct dpu_mdss_cfg dpu_x1e80100_cfg;
#endif /* _DPU_HW_CATALOG_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 2af62d8fa9a7..d6412395bacc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1398,6 +1398,7 @@ static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sm8450-dpu", .data = &dpu_sm8450_cfg, },
{ .compatible = "qcom,sm8550-dpu", .data = &dpu_sm8550_cfg, },
{ .compatible = "qcom,sm8650-dpu", .data = &dpu_sm8650_cfg, },
+ { .compatible = "qcom,x1e80100-dpu", .data = &dpu_x1e80100_cfg, },
{}
};
MODULE_DEVICE_TABLE(of, dpu_dt_match);
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-02-20 14:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-02-20 14:15 [PATCH v4 0/4] drm/msm: Add display support for X1E80100 Abel Vesa
2024-02-20 14:15 ` [PATCH v4 1/4] dt-bindings: display/msm: Document the DPU " Abel Vesa
2024-02-20 14:15 ` [PATCH v4 2/4] dt-bindings: display/msm: Document MDSS on X1E80100 Abel Vesa
2024-02-20 14:15 ` [PATCH v4 3/4] drm/msm: mdss: Add X1E80100 support Abel Vesa
2024-02-20 14:15 ` [PATCH v4 4/4] drm/msm/dpu: " Abel Vesa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).