* [PATCH v6 0/1] drm/bridge: it6505: fix hibernate to resume no display issue
@ 2024-04-23 8:27 kuro
2024-04-23 8:27 ` [PATCH v6 1/1] " kuro
0 siblings, 1 reply; 4+ messages in thread
From: kuro @ 2024-04-23 8:27 UTC (permalink / raw
Cc: Allen Chen, Pin-yen Lin, Kuro Chung, Kenneth Haung,
open list:DRM DRIVERS, Jernej Skrabec, Jonas Karlman,
Laurent Pinchart, open list
From: Kuro <kuro.chung@ite.com.tw>
New patch description for v6 patch
remove the unrelated patch change (split into anoter patch)
remove extra line
New patch description for v5 patch
after customer feedback and test finished, update again, kernel build pass.
New patch description for v4 patch
update by reviewer Pin-yen Lin comment, remove function it6505_irq_video_fifo_error/it6505_irq_io_latch_fifo_overflow
update by reviewer Pin-yen Lin comment, update Signed-off-by column
New patch description for v3 patch
update upstream MAINTAINERS mail list
New patch description for v2 patch
Missing declaration for i variable in function it6505_irq_video_error_handler
, add it by this patch
Origianl description for v1 patch
drm/bridge: it6505: fix hibernate to resume no display issue
ITE added a FIFO reset bit for input video. When system power resume,
the TTL input of it6505 may get some noise before video signal stable
and the hardware function reset is required.
But the input FIFO reset will also trigger error interrupts of output module rising.
Thus, it6505 have to wait a period can clear those expected error interrupts
caused by manual hardware reset in one interrupt handler calling to avoid interrupt looping.
allen (1):
UPSTREAM: drm/bridge: it6505: fix hibernate to resume no display issue
drivers/gpu/drm/bridge/ite-it6505.c | 73 +++++++++++++++++++----------
1 file changed, 49 insertions(+), 24 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v6 1/1] drm/bridge: it6505: fix hibernate to resume no display issue
2024-04-23 8:27 [PATCH v6 0/1] drm/bridge: it6505: fix hibernate to resume no display issue kuro
@ 2024-04-23 8:27 ` kuro
2024-04-23 13:50 ` Robert Foss
0 siblings, 1 reply; 4+ messages in thread
From: kuro @ 2024-04-23 8:27 UTC (permalink / raw
Cc: Allen Chen, Pin-yen Lin, Kuro Chung, Kenneth Haung, Kuro Chung,
Andrzej Hajda, Neil Armstrong, Robert Foss, Laurent Pinchart,
Jonas Karlman, Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter,
open list:DRM DRIVERS, open list
From: Kuro <kuro.chung@ite.com.tw>
ITE added a FIFO reset bit for input video. When system power resume,
the TTL input of it6505 may get some noise before video signal stable
and the hardware function reset is required.
But the input FIFO reset will also trigger error interrupts of output module rising.
Thus, it6505 have to wait a period can clear those expected error interrupts
caused by manual hardware reset in one interrupt handler calling to avoid interrupt looping.
Signed-off-by: Kuro Chung <kuro.chung@ite.corp-partner.google.com>
---
drivers/gpu/drm/bridge/ite-it6505.c | 73 +++++++++++++++++++----------
1 file changed, 49 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index b53da9bb65a16..ae7f4c7ec6dd0 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -1317,9 +1317,15 @@ static void it6505_video_reset(struct it6505 *it6505)
it6505_link_reset_step_train(it6505);
it6505_set_bits(it6505, REG_DATA_MUTE_CTRL, EN_VID_MUTE, EN_VID_MUTE);
it6505_set_bits(it6505, REG_INFOFRAME_CTRL, EN_VID_CTRL_PKT, 0x00);
- it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
+
+ it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x02);
+ it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x00);
+
it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, RST_501_FIFO);
it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, 0x00);
+
+ it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
+ usleep_range(1000, 2000);
it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, 0x00);
}
@@ -2249,12 +2255,11 @@ static void it6505_link_training_work(struct work_struct *work)
if (ret) {
it6505->auto_train_retry = AUTO_TRAIN_RETRY;
it6505_link_train_ok(it6505);
- return;
} else {
it6505->auto_train_retry--;
+ it6505_dump(it6505);
}
- it6505_dump(it6505);
}
static void it6505_plugged_status_to_codec(struct it6505 *it6505)
@@ -2475,31 +2480,53 @@ static void it6505_irq_link_train_fail(struct it6505 *it6505)
schedule_work(&it6505->link_works);
}
-static void it6505_irq_video_fifo_error(struct it6505 *it6505)
+static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
{
- struct device *dev = &it6505->client->dev;
-
- DRM_DEV_DEBUG_DRIVER(dev, "video fifo overflow interrupt");
- it6505->auto_train_retry = AUTO_TRAIN_RETRY;
- flush_work(&it6505->link_works);
- it6505_stop_hdcp(it6505);
- it6505_video_reset(it6505);
+ return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
}
-static void it6505_irq_io_latch_fifo_overflow(struct it6505 *it6505)
+static void it6505_irq_video_handler(struct it6505 *it6505, const int *int_status)
{
struct device *dev = &it6505->client->dev;
+ int reg_0d, reg_int03;
- DRM_DEV_DEBUG_DRIVER(dev, "IO latch fifo overflow interrupt");
- it6505->auto_train_retry = AUTO_TRAIN_RETRY;
- flush_work(&it6505->link_works);
- it6505_stop_hdcp(it6505);
- it6505_video_reset(it6505);
-}
+ /*
+ * When video SCDT change with video not stable,
+ * Or video FIFO error, need video reset
+ */
-static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
-{
- return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
+ if ((!it6505_get_video_status(it6505) &&
+ (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))) ||
+ (it6505_test_bit(BIT_INT_IO_FIFO_OVERFLOW, (unsigned int *) int_status)) ||
+ (it6505_test_bit(BIT_INT_VID_FIFO_ERROR, (unsigned int *) int_status))) {
+
+ it6505->auto_train_retry = AUTO_TRAIN_RETRY;
+ flush_work(&it6505->link_works);
+ it6505_stop_hdcp(it6505);
+ it6505_video_reset(it6505);
+
+ usleep_range(10000, 11000);
+
+ /*
+ * Clear FIFO error IRQ to prevent fifo error -> reset loop
+ * HW will trigger SCDT change IRQ again when video stable
+ */
+
+ reg_int03 = it6505_read(it6505, INT_STATUS_03);
+ reg_0d = it6505_read(it6505, REG_SYSTEM_STS);
+
+ reg_int03 &= (BIT(INT_VID_FIFO_ERROR) | BIT(INT_IO_LATCH_FIFO_OVERFLOW));
+ it6505_write(it6505, INT_STATUS_03, reg_int03);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "reg08 = 0x%02x", reg_int03);
+ DRM_DEV_DEBUG_DRIVER(dev, "reg0D = 0x%02x", reg_0d);
+
+ return;
+ }
+
+
+ if (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))
+ it6505_irq_scdt(it6505);
}
static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
@@ -2512,15 +2539,12 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
} irq_vec[] = {
{ BIT_INT_HPD, it6505_irq_hpd },
{ BIT_INT_HPD_IRQ, it6505_irq_hpd_irq },
- { BIT_INT_SCDT, it6505_irq_scdt },
{ BIT_INT_HDCP_FAIL, it6505_irq_hdcp_fail },
{ BIT_INT_HDCP_DONE, it6505_irq_hdcp_done },
{ BIT_INT_AUX_CMD_FAIL, it6505_irq_aux_cmd_fail },
{ BIT_INT_HDCP_KSV_CHECK, it6505_irq_hdcp_ksv_check },
{ BIT_INT_AUDIO_FIFO_ERROR, it6505_irq_audio_fifo_error },
{ BIT_INT_LINK_TRAIN_FAIL, it6505_irq_link_train_fail },
- { BIT_INT_VID_FIFO_ERROR, it6505_irq_video_fifo_error },
- { BIT_INT_IO_FIFO_OVERFLOW, it6505_irq_io_latch_fifo_overflow },
};
int int_status[3], i;
@@ -2550,6 +2574,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
if (it6505_test_bit(irq_vec[i].bit, (unsigned int *)int_status))
irq_vec[i].handler(it6505);
}
+ it6505_irq_video_handler(it6505, (unsigned int *) int_status);
}
pm_runtime_put_sync(dev);
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v6 1/1] drm/bridge: it6505: fix hibernate to resume no display issue
2024-04-23 8:27 ` [PATCH v6 1/1] " kuro
@ 2024-04-23 13:50 ` Robert Foss
2024-05-06 9:13 ` kuro.chung
0 siblings, 1 reply; 4+ messages in thread
From: Robert Foss @ 2024-04-23 13:50 UTC (permalink / raw
To: kuro
Cc: Allen Chen, Pin-yen Lin, Kenneth Haung, Kuro Chung, Andrzej Hajda,
Neil Armstrong, Laurent Pinchart, Jonas Karlman, Jernej Skrabec,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie,
Daniel Vetter, open list:DRM DRIVERS, open list
On Tue, Apr 23, 2024 at 10:16 AM kuro <kuro.chung@ite.com.tw> wrote:
>
> From: Kuro <kuro.chung@ite.com.tw>
>
> ITE added a FIFO reset bit for input video. When system power resume,
> the TTL input of it6505 may get some noise before video signal stable
> and the hardware function reset is required.
> But the input FIFO reset will also trigger error interrupts of output module rising.
> Thus, it6505 have to wait a period can clear those expected error interrupts
> caused by manual hardware reset in one interrupt handler calling to avoid interrupt looping.
>
> Signed-off-by: Kuro Chung <kuro.chung@ite.corp-partner.google.com>
>
> ---
> drivers/gpu/drm/bridge/ite-it6505.c | 73 +++++++++++++++++++----------
> 1 file changed, 49 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index b53da9bb65a16..ae7f4c7ec6dd0 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -1317,9 +1317,15 @@ static void it6505_video_reset(struct it6505 *it6505)
> it6505_link_reset_step_train(it6505);
> it6505_set_bits(it6505, REG_DATA_MUTE_CTRL, EN_VID_MUTE, EN_VID_MUTE);
> it6505_set_bits(it6505, REG_INFOFRAME_CTRL, EN_VID_CTRL_PKT, 0x00);
> - it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
> +
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x02);
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x00);
> +
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, RST_501_FIFO);
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, 0x00);
> +
> + it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
> + usleep_range(1000, 2000);
> it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, 0x00);
Can any of these magic values be defined as macros?
> }
>
> @@ -2249,12 +2255,11 @@ static void it6505_link_training_work(struct work_struct *work)
> if (ret) {
> it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> it6505_link_train_ok(it6505);
> - return;
> } else {
> it6505->auto_train_retry--;
> + it6505_dump(it6505);
> }
>
> - it6505_dump(it6505);
> }
>
> static void it6505_plugged_status_to_codec(struct it6505 *it6505)
> @@ -2475,31 +2480,53 @@ static void it6505_irq_link_train_fail(struct it6505 *it6505)
> schedule_work(&it6505->link_works);
> }
>
> -static void it6505_irq_video_fifo_error(struct it6505 *it6505)
> +static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
> {
> - struct device *dev = &it6505->client->dev;
> -
> - DRM_DEV_DEBUG_DRIVER(dev, "video fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> + return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
> }
>
> -static void it6505_irq_io_latch_fifo_overflow(struct it6505 *it6505)
> +static void it6505_irq_video_handler(struct it6505 *it6505, const int *int_status)
> {
> struct device *dev = &it6505->client->dev;
> + int reg_0d, reg_int03;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "IO latch fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> -}
> + /*
> + * When video SCDT change with video not stable,
> + * Or video FIFO error, need video reset
> + */
>
> -static bool it6505_test_bit(unsigned int bit, const unsigned int *addr)
> -{
> - return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
> + if ((!it6505_get_video_status(it6505) &&
> + (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))) ||
> + (it6505_test_bit(BIT_INT_IO_FIFO_OVERFLOW, (unsigned int *) int_status)) ||
> + (it6505_test_bit(BIT_INT_VID_FIFO_ERROR, (unsigned int *) int_status))) {
> +
> + it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> + flush_work(&it6505->link_works);
> + it6505_stop_hdcp(it6505);
> + it6505_video_reset(it6505);
> +
> + usleep_range(10000, 11000);
> +
> + /*
> + * Clear FIFO error IRQ to prevent fifo error -> reset loop
> + * HW will trigger SCDT change IRQ again when video stable
> + */
> +
> + reg_int03 = it6505_read(it6505, INT_STATUS_03);
> + reg_0d = it6505_read(it6505, REG_SYSTEM_STS);
> +
> + reg_int03 &= (BIT(INT_VID_FIFO_ERROR) | BIT(INT_IO_LATCH_FIFO_OVERFLOW));
> + it6505_write(it6505, INT_STATUS_03, reg_int03);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "reg08 = 0x%02x", reg_int03);
Is this correct? Doesreg_int03 contain reg08?
> + DRM_DEV_DEBUG_DRIVER(dev, "reg0D = 0x%02x", reg_0d);
> +
> + return;
> + }
> +
> +
> + if (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))
> + it6505_irq_scdt(it6505);
> }
>
> static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> @@ -2512,15 +2539,12 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> } irq_vec[] = {
> { BIT_INT_HPD, it6505_irq_hpd },
> { BIT_INT_HPD_IRQ, it6505_irq_hpd_irq },
> - { BIT_INT_SCDT, it6505_irq_scdt },
> { BIT_INT_HDCP_FAIL, it6505_irq_hdcp_fail },
> { BIT_INT_HDCP_DONE, it6505_irq_hdcp_done },
> { BIT_INT_AUX_CMD_FAIL, it6505_irq_aux_cmd_fail },
> { BIT_INT_HDCP_KSV_CHECK, it6505_irq_hdcp_ksv_check },
> { BIT_INT_AUDIO_FIFO_ERROR, it6505_irq_audio_fifo_error },
> { BIT_INT_LINK_TRAIN_FAIL, it6505_irq_link_train_fail },
> - { BIT_INT_VID_FIFO_ERROR, it6505_irq_video_fifo_error },
> - { BIT_INT_IO_FIFO_OVERFLOW, it6505_irq_io_latch_fifo_overflow },
> };
> int int_status[3], i;
>
> @@ -2550,6 +2574,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> if (it6505_test_bit(irq_vec[i].bit, (unsigned int *)int_status))
> irq_vec[i].handler(it6505);
> }
> + it6505_irq_video_handler(it6505, (unsigned int *) int_status);
> }
>
> pm_runtime_put_sync(dev);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v6 1/1] drm/bridge: it6505: fix hibernate to resume no display issue
2024-04-23 13:50 ` Robert Foss
@ 2024-05-06 9:13 ` kuro.chung
0 siblings, 0 replies; 4+ messages in thread
From: kuro.chung @ 2024-05-06 9:13 UTC (permalink / raw
To: rfoss
Cc: allen.chen, treapking, Kenneth.Hung, kuro.chung, andrzej.hajda,
neil.armstrong, Laurent.pinchart, jonas, jernej.skrabec,
maarten.lankhorst, mripard, tzimmermann, airlied, daniel,
dri-devel, linux-kernel
-----Original Message-----
From: Robert Foss <rfoss@kernel.org>
Sent: Tuesday, April 23, 2024 9:50 PM
To: Kuro Chung (鐘仕廷) <kuro.chung@ite.com.tw>
Cc: Allen Chen <allen.chen@ite.com.tw>; Pin-yen Lin <treapking@chromium.org>; Kenneth Hung (洪家倫) <Kenneth.Hung@ite.com.tw>; Kuro Chung <kuro.chung@ite.corp-partner.google.com>; Andrzej Hajda <andrzej.hajda@intel.com>; Neil Armstrong <neil.armstrong@linaro.org>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Jonas Karlman <jonas@kwiboo.se>; Jernej Skrabec <jernej.skrabec@gmail.com>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Maxime Ripard <mripard@kernel.org>; Thomas Zimmermann <tzimmermann@suse.de>; David Airlie <airlied@gmail.com>; Daniel Vetter <daniel@ffwll.ch>; open list:DRM DRIVERS <dri-devel@lists.freedesktop.org>; open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 1/1] drm/bridge: it6505: fix hibernate to resume no display issue
On Tue, Apr 23, 2024 at 10:16 AM kuro <kuro.chung@ite.com.tw> wrote:
>
> From: Kuro <kuro.chung@ite.com.tw>
>
> ITE added a FIFO reset bit for input video. When system power resume,
> the TTL input of it6505 may get some noise before video signal stable
> and the hardware function reset is required.
> But the input FIFO reset will also trigger error interrupts of output module rising.
> Thus, it6505 have to wait a period can clear those expected error
> interrupts caused by manual hardware reset in one interrupt handler calling to avoid interrupt looping.
>
> Signed-off-by: Kuro Chung <kuro.chung@ite.corp-partner.google.com>
>
> ---
> drivers/gpu/drm/bridge/ite-it6505.c | 73
> +++++++++++++++++++----------
> 1 file changed, 49 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c
> b/drivers/gpu/drm/bridge/ite-it6505.c
> index b53da9bb65a16..ae7f4c7ec6dd0 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -1317,9 +1317,15 @@ static void it6505_video_reset(struct it6505 *it6505)
> it6505_link_reset_step_train(it6505);
> it6505_set_bits(it6505, REG_DATA_MUTE_CTRL, EN_VID_MUTE, EN_VID_MUTE);
> it6505_set_bits(it6505, REG_INFOFRAME_CTRL, EN_VID_CTRL_PKT, 0x00);
> - it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
> +
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET, 0x02);
> + it6505_set_bits(it6505, REG_VID_BUS_CTRL1, TX_FIFO_RESET,
> + 0x00);
> +
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO, RST_501_FIFO);
> it6505_set_bits(it6505, REG_501_FIFO_CTRL, RST_501_FIFO,
> 0x00);
> +
> + it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, VIDEO_RESET);
> + usleep_range(1000, 2000);
> it6505_set_bits(it6505, REG_RESET_CTRL, VIDEO_RESET, 0x00);
Can any of these magic values be defined as macros?
-> I will modify the code 0x02 to TX_FIFO_RESET
> }
>
> @@ -2249,12 +2255,11 @@ static void it6505_link_training_work(struct work_struct *work)
> if (ret) {
> it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> it6505_link_train_ok(it6505);
> - return;
> } else {
> it6505->auto_train_retry--;
> + it6505_dump(it6505);
> }
>
> - it6505_dump(it6505);
> }
>
> static void it6505_plugged_status_to_codec(struct it6505 *it6505) @@
> -2475,31 +2480,53 @@ static void it6505_irq_link_train_fail(struct it6505 *it6505)
> schedule_work(&it6505->link_works);
> }
>
> -static void it6505_irq_video_fifo_error(struct it6505 *it6505)
> +static bool it6505_test_bit(unsigned int bit, const unsigned int
> +*addr)
> {
> - struct device *dev = &it6505->client->dev;
> -
> - DRM_DEV_DEBUG_DRIVER(dev, "video fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> + return 1 & (addr[bit / BITS_PER_BYTE] >> (bit %
> + BITS_PER_BYTE));
> }
>
> -static void it6505_irq_io_latch_fifo_overflow(struct it6505 *it6505)
> +static void it6505_irq_video_handler(struct it6505 *it6505, const int
> +*int_status)
> {
> struct device *dev = &it6505->client->dev;
> + int reg_0d, reg_int03;
>
> - DRM_DEV_DEBUG_DRIVER(dev, "IO latch fifo overflow interrupt");
> - it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> - flush_work(&it6505->link_works);
> - it6505_stop_hdcp(it6505);
> - it6505_video_reset(it6505);
> -}
> + /*
> + * When video SCDT change with video not stable,
> + * Or video FIFO error, need video reset
> + */
>
> -static bool it6505_test_bit(unsigned int bit, const unsigned int
> *addr) -{
> - return 1 & (addr[bit / BITS_PER_BYTE] >> (bit % BITS_PER_BYTE));
> + if ((!it6505_get_video_status(it6505) &&
> + (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))) ||
> + (it6505_test_bit(BIT_INT_IO_FIFO_OVERFLOW, (unsigned int *) int_status)) ||
> + (it6505_test_bit(BIT_INT_VID_FIFO_ERROR, (unsigned int
> + *) int_status))) {
> +
> + it6505->auto_train_retry = AUTO_TRAIN_RETRY;
> + flush_work(&it6505->link_works);
> + it6505_stop_hdcp(it6505);
> + it6505_video_reset(it6505);
> +
> + usleep_range(10000, 11000);
> +
> + /*
> + * Clear FIFO error IRQ to prevent fifo error -> reset loop
> + * HW will trigger SCDT change IRQ again when video stable
> + */
> +
> + reg_int03 = it6505_read(it6505, INT_STATUS_03);
> + reg_0d = it6505_read(it6505, REG_SYSTEM_STS);
> +
> + reg_int03 &= (BIT(INT_VID_FIFO_ERROR) | BIT(INT_IO_LATCH_FIFO_OVERFLOW));
> + it6505_write(it6505, INT_STATUS_03, reg_int03);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "reg08 = 0x%02x",
> + reg_int03);
Is this correct? Doesreg_int03 contain reg08?
-> #define INT_STATUS_03 0x08
-> yes, INT03 is reg08 (offset), reg08 is more readable.
> + DRM_DEV_DEBUG_DRIVER(dev, "reg0D = 0x%02x", reg_0d);
> +
> + return;
> + }
> +
> +
> + if (it6505_test_bit(INT_SCDT_CHANGE, (unsigned int *) int_status))
> + it6505_irq_scdt(it6505);
> }
>
> static irqreturn_t it6505_int_threaded_handler(int unused, void
> *data) @@ -2512,15 +2539,12 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> } irq_vec[] = {
> { BIT_INT_HPD, it6505_irq_hpd },
> { BIT_INT_HPD_IRQ, it6505_irq_hpd_irq },
> - { BIT_INT_SCDT, it6505_irq_scdt },
> { BIT_INT_HDCP_FAIL, it6505_irq_hdcp_fail },
> { BIT_INT_HDCP_DONE, it6505_irq_hdcp_done },
> { BIT_INT_AUX_CMD_FAIL, it6505_irq_aux_cmd_fail },
> { BIT_INT_HDCP_KSV_CHECK, it6505_irq_hdcp_ksv_check },
> { BIT_INT_AUDIO_FIFO_ERROR, it6505_irq_audio_fifo_error },
> { BIT_INT_LINK_TRAIN_FAIL, it6505_irq_link_train_fail },
> - { BIT_INT_VID_FIFO_ERROR, it6505_irq_video_fifo_error },
> - { BIT_INT_IO_FIFO_OVERFLOW, it6505_irq_io_latch_fifo_overflow },
> };
> int int_status[3], i;
>
> @@ -2550,6 +2574,7 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> if (it6505_test_bit(irq_vec[i].bit, (unsigned int *)int_status))
> irq_vec[i].handler(it6505);
> }
> + it6505_irq_video_handler(it6505, (unsigned int *)
> + int_status);
> }
>
> pm_runtime_put_sync(dev);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-05-06 9:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-04-23 8:27 [PATCH v6 0/1] drm/bridge: it6505: fix hibernate to resume no display issue kuro
2024-04-23 8:27 ` [PATCH v6 1/1] " kuro
2024-04-23 13:50 ` Robert Foss
2024-05-06 9:13 ` kuro.chung
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).