From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
David Airlie <airlied@gmail.com>,
linux-kernel@vger.kernel.org, Daniel Vetter <daniel@ffwll.ch>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Michal Simek <michal.simek@amd.com>,
Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH v5 07/10] drm: zynqmp_dp: Use AUX IRQs instead of polling
Date: Fri, 3 May 2024 15:29:19 -0400 [thread overview]
Message-ID: <20240503192922.2172314-8-sean.anderson@linux.dev> (raw)
In-Reply-To: <20240503192922.2172314-1-sean.anderson@linux.dev>
Instead of polling the status register for the AUX status, just enable
the IRQs and signal a completion.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---
(no changes since v3)
Changes in v3:
- New
drivers/gpu/drm/xlnx/zynqmp_dp.c | 35 +++++++++++++++++++++++---------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index c9cdfb56f23e..38610a5b932a 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -286,6 +286,7 @@ struct zynqmp_dp_config {
* @next_bridge: The downstream bridge
* @config: IP core configuration from DTS
* @aux: aux channel
+ * @aux_done: Completed when we get an AUX reply or timeout
* @phy: PHY handles for DP lanes
* @num_lanes: number of enabled phy lanes
* @hpd_work: hot plug detection worker
@@ -306,6 +307,7 @@ struct zynqmp_dp {
struct drm_bridge bridge;
struct work_struct hpd_work;
struct work_struct hpd_irq_work;
+ struct completion aux_done;
struct mutex lock;
struct drm_bridge *next_bridge;
@@ -942,12 +944,15 @@ static int zynqmp_dp_aux_cmd_submit(struct zynqmp_dp *dp, u32 cmd, u16 addr,
u8 *buf, u8 bytes, u8 *reply)
{
bool is_read = (cmd & AUX_READ_BIT) ? true : false;
+ unsigned long time_left;
u32 reg, i;
reg = zynqmp_dp_read(dp, ZYNQMP_DP_INTERRUPT_SIGNAL_STATE);
if (reg & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REQUEST)
return -EBUSY;
+ reinit_completion(&dp->aux_done);
+
zynqmp_dp_write(dp, ZYNQMP_DP_AUX_ADDRESS, addr);
if (!is_read)
for (i = 0; i < bytes; i++)
@@ -962,17 +967,14 @@ static int zynqmp_dp_aux_cmd_submit(struct zynqmp_dp *dp, u32 cmd, u16 addr,
zynqmp_dp_write(dp, ZYNQMP_DP_AUX_COMMAND, reg);
/* Wait for reply to be delivered upto 2ms */
- for (i = 0; ; i++) {
- reg = zynqmp_dp_read(dp, ZYNQMP_DP_INTERRUPT_SIGNAL_STATE);
- if (reg & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REPLY)
- break;
+ time_left = wait_for_completion_timeout(&dp->aux_done,
+ msecs_to_jiffies(2));
+ if (!time_left)
+ return -ETIMEDOUT;
- if (reg & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REPLY_TIMEOUT ||
- i == 2)
- return -ETIMEDOUT;
-
- usleep_range(1000, 1100);
- }
+ reg = zynqmp_dp_read(dp, ZYNQMP_DP_INTERRUPT_SIGNAL_STATE);
+ if (reg & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REPLY_TIMEOUT)
+ return -ETIMEDOUT;
reg = zynqmp_dp_read(dp, ZYNQMP_DP_AUX_REPLY_CODE);
if (reply)
@@ -1056,6 +1058,9 @@ static int zynqmp_dp_aux_init(struct zynqmp_dp *dp)
(w << ZYNQMP_DP_AUX_CLK_DIVIDER_AUX_FILTER_SHIFT) |
(rate / (1000 * 1000)));
+ zynqmp_dp_write(dp, ZYNQMP_DP_INT_EN, ZYNQMP_DP_INT_REPLY_RECEIVED |
+ ZYNQMP_DP_INT_REPLY_TIMEOUT);
+
dp->aux.name = "ZynqMP DP AUX";
dp->aux.dev = dp->dev;
dp->aux.drm_dev = dp->bridge.dev;
@@ -1073,6 +1078,9 @@ static int zynqmp_dp_aux_init(struct zynqmp_dp *dp)
static void zynqmp_dp_aux_cleanup(struct zynqmp_dp *dp)
{
drm_dp_aux_unregister(&dp->aux);
+
+ zynqmp_dp_write(dp, ZYNQMP_DP_INT_DS, ZYNQMP_DP_INT_REPLY_RECEIVED |
+ ZYNQMP_DP_INT_REPLY_TIMEOUT);
}
/* -----------------------------------------------------------------------------
@@ -1730,6 +1738,12 @@ static irqreturn_t zynqmp_dp_irq_handler(int irq, void *data)
if (status & ZYNQMP_DP_INT_HPD_IRQ)
schedule_work(&dp->hpd_irq_work);
+ if (status & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REPLY)
+ complete(&dp->aux_done);
+
+ if (status & ZYNQMP_DP_INTERRUPT_SIGNAL_STATE_REPLY_TIMEOUT)
+ complete(&dp->aux_done);
+
return IRQ_HANDLED;
}
@@ -1753,6 +1767,7 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub)
dp->dpsub = dpsub;
dp->status = connector_status_disconnected;
mutex_init(&dp->lock);
+ init_completion(&dp->aux_done);
INIT_WORK(&dp->hpd_work, zynqmp_dp_hpd_work_func);
INIT_WORK(&dp->hpd_irq_work, zynqmp_dp_hpd_irq_work_func);
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2024-05-03 19:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-03 19:29 [PATCH v5 00/10] drm: zynqmp_dp: IRQ cleanups and debugfs support Sean Anderson
2024-05-03 19:29 ` [PATCH v5 01/10] drm: zynqmp_kms: Fix AUX bus not getting unregistered Sean Anderson
2024-05-03 19:29 ` [PATCH v5 02/10] drm: zynqmp_dp: Rearrange zynqmp_dp for better padding Sean Anderson
2024-05-03 19:29 ` [PATCH v5 03/10] drm: zynqmp_dp: Don't delay work Sean Anderson
2024-05-03 19:29 ` [PATCH v5 04/10] drm: zynqmp_dp: Add locking Sean Anderson
2024-05-03 19:29 ` [PATCH v5 05/10] drm: zynqmp_dp: Don't retrain the link in our IRQ Sean Anderson
2024-05-03 19:29 ` [PATCH v5 06/10] drm: zynqmp_dp: Convert to a hard IRQ Sean Anderson
2024-05-03 19:29 ` Sean Anderson [this message]
2024-05-03 19:29 ` [PATCH v5 08/10] drm: zynqmp_dp: Split off several helper functions Sean Anderson
2024-05-03 19:29 ` [PATCH v5 09/10] drm: zynqmp_dp: Take dp->lock in zynqmp_dp_hpd_work_func Sean Anderson
2024-05-03 19:29 ` [PATCH v5 10/10] drm: zynqmp_dp: Add debugfs interface for compliance testing Sean Anderson
2024-05-31 16:27 ` [PATCH v5 00/10] drm: zynqmp_dp: IRQ cleanups and debugfs support Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240503192922.2172314-8-sean.anderson@linux.dev \
--to=sean.anderson@linux.dev \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=michal.simek@amd.com \
--cc=mripard@kernel.org \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).