From: Robert Richter <rrichter@amd.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>, <x86@kernel.org>,
Andy Lutomirski <luto@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>
Cc: <linux-acpi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-cxl@vger.kernel.org>, Robert Richter <rrichter@amd.com>,
Derick Marks <derick.w.marks@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
"H. Peter Anvin" <hpa@zytor.com>, Len Brown <lenb@kernel.org>
Subject: [PATCH v7 1/4] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
Date: Thu, 2 May 2024 15:10:09 +0200 [thread overview]
Message-ID: <20240502131012.2385725-2-rrichter@amd.com> (raw)
In-Reply-To: <20240502131012.2385725-1-rrichter@amd.com>
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Cc: Derick Marks <derick.w.marks@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
---
arch/x86/include/asm/sparsemem.h | 2 --
arch/x86/mm/numa.c | 4 ++--
drivers/acpi/numa/srat.c | 5 +++++
include/linux/numa.h | 7 +------
4 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index 1be13b2dfe8b..64df897c0ee3 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -37,8 +37,6 @@ extern int phys_to_target_node(phys_addr_t start);
#define phys_to_target_node phys_to_target_node
extern int memory_add_physaddr_to_nid(u64 start);
#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
-extern int numa_fill_memblks(u64 start, u64 end);
-#define numa_fill_memblks numa_fill_memblks
#endif
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 65e9a6e391c0..ce84ba86e69e 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -929,6 +929,8 @@ int memory_add_physaddr_to_nid(u64 start)
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
+#endif
+
static int __init cmp_memblk(const void *a, const void *b)
{
const struct numa_memblk *ma = *(const struct numa_memblk **)a;
@@ -1001,5 +1003,3 @@ int __init numa_fill_memblks(u64 start, u64 end)
}
return 0;
}
-
-#endif
diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index e45e64993c50..3b09fd39eeb4 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -208,6 +208,11 @@ int __init srat_disabled(void)
return acpi_numa < 0;
}
+__weak int __init numa_fill_memblks(u64 start, u64 end)
+{
+ return NUMA_NO_MEMBLK;
+}
+
#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
/*
* Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for
diff --git a/include/linux/numa.h b/include/linux/numa.h
index 915033a75731..1d43371fafd2 100644
--- a/include/linux/numa.h
+++ b/include/linux/numa.h
@@ -36,12 +36,7 @@ int memory_add_physaddr_to_nid(u64 start);
int phys_to_target_node(u64 start);
#endif
-#ifndef numa_fill_memblks
-static inline int __init numa_fill_memblks(u64 start, u64 end)
-{
- return NUMA_NO_MEMBLK;
-}
-#endif
+int numa_fill_memblks(u64 start, u64 end);
#else /* !CONFIG_NUMA */
static inline int numa_nearest_node(int node, unsigned int state)
--
2.39.2
next prev parent reply other threads:[~2024-05-02 13:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-02 13:10 [PATCH v7 0/4] SRAT/CEDT fixes and updates Robert Richter
2024-05-02 13:10 ` Robert Richter [this message]
2024-05-03 19:46 ` [PATCH v7 1/4] x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() Borislav Petkov
2024-05-02 13:10 ` [PATCH v7 2/4] ACPI/NUMA: Remove architecture dependent remainings Robert Richter
2024-05-02 13:10 ` [PATCH v7 3/4] ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit() Robert Richter
2024-05-02 13:10 ` [PATCH v7 4/4] ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity() Robert Richter
2024-05-07 11:48 ` [PATCH v7 0/4] SRAT/CEDT fixes and updates Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240502131012.2385725-2-rrichter@amd.com \
--to=rrichter@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bp@alien8.de \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=derick.w.marks@intel.com \
--cc=hpa@zytor.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).