From: Frank Li <Frank.li@nxp.com>
To: Joy Zou <joy.zou@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<imx@lists.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label
Date: Wed, 8 May 2024 23:36:48 -0400 [thread overview]
Message-ID: <ZjxE0AWyFo5KL39A@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240509015709.3668405-1-joy.zou@nxp.com>
On Thu, May 09, 2024 at 09:57:08AM +0800, Joy Zou wrote:
> Reorder lpi2c2 and lpi2c3 label in alphabetical order.
>
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++---------
> 1 file changed, 105 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index d400d85f42a9..6be1eb920c02 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -105,6 +105,104 @@ &mu2 {
> status = "okay";
> };
>
> +&lpi2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_lpi2c2>;
> + pinctrl-1 = <&pinctrl_lpi2c2>;
> + status = "okay";
> +
> + pcal6524: gpio@22 {
> + compatible = "nxp,pcal6524";
> + reg = <0x22>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcal6524>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + pmic@25 {
> + compatible = "nxp,pca9451a";
> + reg = <0x25>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "BUCK1";
> + regulator-min-microvolt = <610000>;
> + regulator-max-microvolt = <950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck2: BUCK2 {
> + regulator-name = "BUCK2";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <670000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck4: BUCK4{
> + regulator-name = "BUCK4";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5: BUCK5{
> + regulator-name = "BUCK5";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6: BUCK6 {
> + regulator-name = "BUCK6";
> + regulator-min-microvolt = <1060000>;
> + regulator-max-microvolt = <1140000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: LDO1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "LDO4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <840000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5: LDO5 {
> + regulator-name = "LDO5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> &lpi2c3 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -113,6 +211,13 @@ &lpi2c3 {
> pinctrl-0 = <&pinctrl_lpi2c3>;
> status = "okay";
>
> + pcf2131: rtc@53 {
> + compatible = "nxp,pcf2131";
> + reg = <0x53>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> ptn5110: tcpc@50 {
> compatible = "nxp,ptn5110", "tcpci";
> reg = <0x50>;
> @@ -304,118 +409,6 @@ &wdog3 {
> status = "okay";
> };
>
> -&lpi2c2 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - clock-frequency = <400000>;
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&pinctrl_lpi2c2>;
> - pinctrl-1 = <&pinctrl_lpi2c2>;
> - status = "okay";
> -
> - pcal6524: gpio@22 {
> - compatible = "nxp,pcal6524";
> - reg = <0x22>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pcal6524>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> - };
> -
> - pmic@25 {
> - compatible = "nxp,pca9451a";
> - reg = <0x25>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> -
> - regulators {
> - buck1: BUCK1 {
> - regulator-name = "BUCK1";
> - regulator-min-microvolt = <610000>;
> - regulator-max-microvolt = <950000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck2: BUCK2 {
> - regulator-name = "BUCK2";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <670000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck4: BUCK4{
> - regulator-name = "BUCK4";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck5: BUCK5{
> - regulator-name = "BUCK5";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck6: BUCK6 {
> - regulator-name = "BUCK6";
> - regulator-min-microvolt = <1060000>;
> - regulator-max-microvolt = <1140000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo1: LDO1 {
> - regulator-name = "LDO1";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <1980000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo4: LDO4 {
> - regulator-name = "LDO4";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <840000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo5: LDO5 {
> - regulator-name = "LDO5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&lpi2c3 {
> - clock-frequency = <400000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpi2c3>;
> - status = "okay";
> -
> - pcf2131: rtc@53 {
> - compatible = "nxp,pcf2131";
> - reg = <0x53>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> - };
> -};
> -
> &iomuxc {
> pinctrl_eqos: eqosgrp {
> fsl,pins = <
> --
> 2.37.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2024-05-09 3:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-09 1:57 [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label Joy Zou
2024-05-09 3:36 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZjxE0AWyFo5KL39A@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=joy.zou@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).