messages from 2023-06-14 09:00:17 to 2023-06-14 20:16:11 UTC [more...]
[PATCH v8 00/18] GMU-less A6xx support (A610, A619_holi)
2023-06-14 20:15 UTC (11+ messages)
` [PATCH v8 13/18] drm/msm/a6xx: Add A610 support
` [PATCH v8 14/18] drm/msm/a6xx: Fix some A619 tunables
` [PATCH v8 15/18] drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
` [PATCH v8 16/18] drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
` [PATCH v8 17/18] drm/msm/a6xx: Add A619_holi speedbin support
[PATCH 00/18] ARM: qcom: apq8064: support CPU frequency scaling
2023-06-14 20:11 UTC (8+ messages)
` [PATCH 01/18] dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs
` [PATCH 02/18] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml
` [PATCH 03/18] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node
[PATCH 0/3] Add support for databus widen mode
2023-06-14 19:54 UTC (12+ messages)
` [PATCH 1/3] drm/msm/dpu: Add DPU_INTF_DATABUS_WIDEN feature flag for DPU >= 5.0
` [PATCH 3/3] drm/msm/dsi: Enable DATABUS_WIDEN for DSI command mode
[PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
2023-06-14 19:44 UTC (5+ messages)
[PATCH] regulator: qcom-rpmh: Revert "regulator: qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"
2023-06-14 19:35 UTC (19+ messages)
[PATCH v6 0/3] Add support to configure Coresight Dummy subunit
2023-06-14 19:24 UTC (3+ messages)
` [PATCH v6 2/3] dt-bindings: arm: Add support for Coresight dummy trace
[PATCH v2 0/2] of: reserved_mem: Improve range allocations
2023-06-14 19:20 UTC (3+ messages)
` [PATCH v2 1/2] of: reserved_mem: Try to keep range allocations contiguous
` [PATCH v2 2/2] of: reserved_mem: Use stable allocation order
[PATCH v6 00/22] Restructure RPM SMD ICC
2023-06-14 18:04 UTC (23+ messages)
` [PATCH v6 01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings
` [PATCH v6 02/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM
` [PATCH v6 03/22] soc: qcom: smd-rpm: Use tabs for defines
` [PATCH v6 04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header
` [PATCH v6 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
` [PATCH v6 06/22] interconnect: qcom: icc-rpm: Introduce keep_alive
` [PATCH v6 07/22] interconnect: qcom: Add missing headers in icc-rpm.h
` [PATCH v6 08/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h
` [PATCH v6 09/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code
` [PATCH v6 10/22] interconnect: qcom: Define RPM bus clocks
` [PATCH v6 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions
` [PATCH v6 12/22] interconnect: qcom: msm8996: "
` [PATCH v6 13/22] interconnect: qcom: qcs404: "
` [PATCH v6 14/22] interconnect: qcom: msm8939: "
` [PATCH v6 15/22] interconnect: qcom: msm8916: "
` [PATCH v6 16/22] interconnect: qcom: qcm2290: "
` [PATCH v6 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc
` [PATCH v6 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks
` [PATCH v6 19/22] interconnect: qcom: icc-rpm: Fix bucket number
` [PATCH v6 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts
` [PATCH v6 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req
` [PATCH v6 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations
[PATCH v5 00/22] Restructure RPM SMD ICC
2023-06-14 17:40 UTC (32+ messages)
` [PATCH v5 01/22] dt-bindings: interconnect: Add Qcom RPM ICC bindings
` [PATCH v5 02/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM
` [PATCH v5 03/22] soc: qcom: smd-rpm: Use tabs for defines
` [PATCH v5 04/22] clk: qcom: smd-rpm: Move some RPM resources to the common header
` [PATCH v5 05/22] soc: qcom: smd-rpm: Move icc_smd_rpm registration to clk-smd-rpm
` [PATCH v5 06/22] interconnect: qcom: icc-rpm: Introduce keep_alive
` [PATCH v5 07/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h
` [PATCH v5 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code
` [PATCH v5 09/22] interconnect: qcom: Add missing headers in icc-rpm.h
` [PATCH v5 10/22] interconnect: qcom: Define RPM bus clocks
` [PATCH v5 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions
` [PATCH v5 12/22] interconnect: qcom: msm8996: "
` [PATCH v5 13/22] interconnect: qcom: qcs404: "
` [PATCH v5 14/22] interconnect: qcom: msm8939: "
` [PATCH v5 15/22] interconnect: qcom: msm8916: "
` [PATCH v5 16/22] interconnect: qcom: qcm2290: "
` [PATCH v5 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc
` [PATCH v5 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks
` [PATCH v5 19/22] interconnect: qcom: icc-rpm: Fix bucket number
` [PATCH v5 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts
` [PATCH v5 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req
` [PATCH v5 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations
[PATCH v3 0/6] Add MSM8226 OCMEM support plus some extra OCMEM driver fixes
2023-06-14 16:35 UTC (7+ messages)
` [PATCH v3 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
` [PATCH v3 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
` [PATCH v3 3/6] soc: qcom: ocmem: make iface clock optional
` [PATCH v3 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
` [PATCH v3 5/6] soc: qcom: ocmem: Add support for msm8226
` [PATCH v3 6/6] ARM: dts: qcom: msm8226: Add ocmem
[PATCH v2 0/2] remoteproc: qcom: Use of_reserved_mem_lookup()
2023-06-14 16:31 UTC (3+ messages)
` [PATCH v2 1/2] remoteproc: qcom: Handle reserved-memory allocation issues
` [PATCH v2 2/2] remoteproc: qcom: Use of_reserved_mem_lookup()
[PATCH] accel/qaic: Call DRM helper function to destroy prime GEM
2023-06-14 16:15 UTC
[PATCH 0/8] arm64: dts: qcom: msm8939: Rework regulator constraints
2023-06-14 16:03 UTC (14+ messages)
` [PATCH 1/8] arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
` [PATCH 2/8] arm64: dts: qcom: msm8939: Disable lpass_codec by default
` [PATCH 3/8] arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
` [PATCH 4/8] arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
` [PATCH 5/8] arm64: dts: qcom: msm8939: Fix regulator constraints
` [PATCH 7/8] arm64: dts: qcom: msm8939: Define regulator constraints next to usage
[PATCH v4 0/2] drm/msm/adreno: GPU support on SC8280XP
2023-06-14 16:03 UTC (7+ messages)
` [PATCH v4 1/2] arm64: dts: qcom: sc8280xp: Add GPU related nodes
` [PATCH v4 2/2] arm64: dts: qcom: sc8280xp: Enable "
[PATCH v4 0/3] PCI: qcom: ep: Add basic interconnect support
2023-06-14 16:03 UTC (5+ messages)
` [PATCH v4 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
` [PATCH v4 2/3] arm: dts: qcom: sdx55: Add interconnect path
` [PATCH v4 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
` (subset) [PATCH v4 0/3] PCI: qcom: ep: Add basic interconnect support
[PATCH v2] soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
2023-06-14 16:03 UTC (3+ messages)
[PATCH v2 0/3] drm/msm/adreno: GPU support on SC8280XP
2023-06-14 16:03 UTC (2+ messages)
[PATCH 0/3] drm/msm/adreno: GPU support on SC8280XP
2023-06-14 16:03 UTC (2+ messages)
[PATCH] arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
2023-06-14 16:03 UTC (2+ messages)
[PATCH V7 0/3] rpmsg signaling/flowcontrol patches
2023-06-14 15:54 UTC (9+ messages)
` [PATCH V7 1/3] rpmsg: core: Add signal API support
` [PATCH V7 2/3] rpmsg: glink: Add support to handle signals command
` [PATCH V7 3/3] rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
[PATCH v3 1/5] mtd: rawnand: qcom: Implement exec_op()
2023-06-14 15:19 UTC (7+ messages)
` [PATCH v3 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op
` [PATCH v3 4/5] mtd: rawnand: qcom: Add support for read, write, erase exec_ops
[PATCH] remoteproc: qcom: Use of_reserved_mem_lookup()
2023-06-14 15:13 UTC (3+ messages)
[PATCH RFC v1 0/3] PCI: EPC: Add support to wake up host from D3 states
2023-06-14 15:00 UTC (4+ messages)
` [PATCH RFC v1 1/3] PCI: endpoint: Add wakeup host API to EPC core
` [PATCH RFC v1 2/3] pci: dwc: Add wakeup host op to pci_epc_ops
` [PATCH RFC v1 3/3] PCI: qcom: ep: Add wake up host op to dw_pcie_ep_ops
[PATCH 00/26] arm64: qcom: sa8775p-ride: enable the first ethernet port
2023-06-14 14:51 UTC (4+ messages)
` [PATCH 24/26] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
[PATCH RFC v2] soc: qcom: icc-bwmon: Set default thresholds dynamically
2023-06-14 14:34 UTC (2+ messages)
[PATCH v3 0/3] PCI: qcom: ep: Add basic interconnect support
2023-06-14 14:28 UTC (8+ messages)
` [PATCH v3 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path
` [PATCH v3 3/3] PCI: qcom-ep: Add ICC bandwidth voting support
[PATCH V2 00/13] Add multipd remoteproc support
2023-06-14 13:59 UTC (12+ messages)
` [PATCH V2 01/13] dt-bindings: remoteproc: qcom: Add support for multipd model
[PATCH RFC] media: camss: Intepret OF graph connections more sensibly
2023-06-14 13:55 UTC (4+ messages)
[PATCH v2] arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
2023-06-14 13:13 UTC (6+ messages)
[PATCH 0/3] typec: support Audio Accessory mode on FSA4480
2023-06-14 13:12 UTC (7+ messages)
` [PATCH 1/3] usb: typec: ucsi: call typec_set_mode on non-altmode partner change
` [PATCH 2/3] usb: typec: fsa4480: rework mux & switch setup to handle more states
` [PATCH 3/3] usb: typec: fsa4480: add support for Audio Accessory Mode
[PATCH V2 0/6] Add camera clock controller support for SM8550
2023-06-14 12:26 UTC (10+ messages)
` [PATCH V2 3/6] clk: qcom: clk-alpha-pll: Remove explicit CAL_L configuration for EVO PLL
[PATCH 0/4] SM8250 Edo pins, keys & pmic
2023-06-14 12:27 UTC (6+ messages)
` [PATCH 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
` [PATCH 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs
` [PATCH 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC
` [PATCH 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys
[PATCH v4 0/8] Add minimal boot support for IPQ5018
2023-06-14 12:17 UTC (6+ messages)
` [PATCH v4 2/8] clk: qcom: Add Global Clock controller (GCC) driver "
[PATCH V4 0/4] Add camera clock controller support for SM8550
2023-06-14 12:17 UTC (12+ messages)
` [PATCH V4 2/4] clk: qcom: camcc-sm8550: Add camera clock controller driver "
` [PATCH V4 4/4] arm64: dts: qcom: sm8550: Add camera clock controller
[PATCH V3 0/5] Add camera clock controller support for SM8550
2023-06-14 11:57 UTC (11+ messages)
` [PATCH V3 2/5] clk: qcom: Remove support to set CAL_L field in lucid evo pll configure
` [PATCH V3 4/5] clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
[PATCH v1] misc: fastrpc: Create fastrpc scalar with correct buffer count
2023-06-14 11:54 UTC
[PATCH v5 00/13]
2023-06-14 11:52 UTC (4+ messages)
` [PATCH v5 02/13] fbdev: Add initializer macros for struct fb_ops
[PATCH v3 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
2023-06-14 11:38 UTC (3+ messages)
` [PATCH v3 2/2] usb: typec: add support for the "
[PATCH v2 0/7] SM6350 GPU
2023-06-14 11:35 UTC (8+ messages)
` [PATCH v2 1/7] clk: qcom: gpucc-sm6350: Introduce index-based clk lookup
` [PATCH v2 2/7] clk: qcom: gpucc-sm6350: Fix clock source names
` [PATCH v2 3/7] arm64: dts: qcom: sm6350: Add GPUCC node
` [PATCH v2 4/7] arm64: dts: qcom: sm6350: Add QFPROM node
` [PATCH v2 5/7] arm64: dts: qcom: sm6350: Add GPU nodes
` [PATCH v2 6/7] arm64: dts: qcom: sm6350: Fix ZAP region
` [PATCH v2 7/7] arm64: dts: qcom: sm6350: Add DPU1 nodes
[PATCH] soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer for non-uart modes
2023-06-14 11:27 UTC (8+ messages)
[PATCH 0/2] Add initial support for RDP446 of IPQ5332 family
2023-06-14 10:59 UTC (8+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: document MI04.1 board based on "
` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP446 variant
[PATCH 1/2] PCI: endpoint: Check correct variable in __pci_epf_mhi_alloc_map()
2023-06-14 10:42 UTC (2+ messages)
[PATCH 0/2] Add common RDP dtsi file for ipq9574
2023-06-14 10:42 UTC (5+ messages)
` [PATCH 1/2] arm64: dts: qcom: ipq9574: Add common RDP dtsi file
` [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable WPS buttons
[PATCH 1/2] drm/msm/dpu: drop SSPP register dumpers
2023-06-14 10:41 UTC (5+ messages)
[PATCH 2/2] drm: Remove struct drm_driver.gem_prime_mmap
2023-06-14 10:39 UTC (6+ messages)
` [2/2] "
[PATCH] arm64: dts: qcom: ipq9574: enable the SPI NOR support in RDP433
2023-06-14 10:38 UTC (5+ messages)
[PATCH 1/2] clk: qcom: mmcc-msm8974: use clk_rcg2_shared_ops for mdp_clk_src clock
2023-06-14 10:19 UTC (8+ messages)
` [PATCH 2/2] clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
[PATCH] drm/msm/dsi: Enable BURST_MODE for command mode for DSI 6G v1.3+
2023-06-14 9:43 UTC (2+ messages)
[PULL] Update firmware for Qualcomm SDM845 platform
2023-06-14 8:59 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).