From: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Taniya Das <quic_tdas@quicinc.com>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Ajit Pandey <quic_ajipan@quicinc.com>,
Imran Shaik <quic_imrashai@quicinc.com>,
"Jagadeesh Kona" <quic_jkona@quicinc.com>,
Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Subject: [PATCH v2] clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src
Date: Tue, 13 Feb 2024 12:17:24 +0530 [thread overview]
Message-ID: <20240213-gcc-ao-support-v2-1-fd2127e8d8f4@quicinc.com> (raw)
De-register the gcc_cpuss_ahb_clk_src and its branch clocks
as there is no rate setting happening on them.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
Remove gcc_cpuss_ahb_clk_src and its branch clocks.
---
Changes in v2:
- As per Konrad's comments, de-register the gcc_cpuss_ahb_clk_src
instead of adding AO support as no rate-setting is happening on it.
- Link to v1: https://lore.kernel.org/r/20240123-gcc-ao-support-v1-0-6c18d5310874@quicinc.com
---
drivers/clk/qcom/gcc-sm8150.c | 61 -------------------------------------------
1 file changed, 61 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 05d115c52dfe..f06f0548fe7d 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -207,28 +207,6 @@ static const struct clk_parent_data gcc_parents_7[] = {
{ .hw = &gpll0_out_even.clkr.hw },
};
-static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
- F(19200000, P_BI_TCXO, 1, 0, 0),
- F(50000000, P_GPLL0_OUT_MAIN, 12, 0, 0),
- F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
- { }
-};
-
-static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
- .cmd_rcgr = 0x48014,
- .mnd_width = 0,
- .hid_width = 5,
- .parent_map = gcc_parent_map_0,
- .freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gcc_cpuss_ahb_clk_src",
- .parent_data = gcc_parents_0,
- .num_parents = ARRAY_SIZE(gcc_parents_0),
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_rcg2_ops,
- },
-};
-
static const struct freq_tbl ftbl_gcc_emac_ptp_clk_src[] = {
F(19200000, P_BI_TCXO, 1, 0, 0),
F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
@@ -1321,24 +1299,6 @@ static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = {
},
};
-static struct clk_branch gcc_cpuss_ahb_clk = {
- .halt_reg = 0x48000,
- .halt_check = BRANCH_HALT_VOTED,
- .clkr = {
- .enable_reg = 0x52004,
- .enable_mask = BIT(21),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_cpuss_ahb_clk",
- .parent_hws = (const struct clk_hw *[]){
- &gcc_cpuss_ahb_clk_src.clkr.hw },
- .num_parents = 1,
- /* required for cpuss */
- .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_cpuss_dvm_bus_clk = {
.halt_reg = 0x48190,
.halt_check = BRANCH_HALT,
@@ -2645,24 +2605,6 @@ static struct clk_branch gcc_sdcc4_apps_clk = {
},
};
-static struct clk_branch gcc_sys_noc_cpuss_ahb_clk = {
- .halt_reg = 0x4819c,
- .halt_check = BRANCH_HALT_VOTED,
- .clkr = {
- .enable_reg = 0x52004,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_sys_noc_cpuss_ahb_clk",
- .parent_hws = (const struct clk_hw *[]){
- &gcc_cpuss_ahb_clk_src.clkr.hw },
- .num_parents = 1,
- /* required for cpuss */
- .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_tsif_ahb_clk = {
.halt_reg = 0x36004,
.halt_check = BRANCH_HALT,
@@ -3510,8 +3452,6 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
[GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr,
- [GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr,
- [GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
[GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
[GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
[GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr,
@@ -3629,7 +3569,6 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
[GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
[GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr,
- [GCC_SYS_NOC_CPUSS_AHB_CLK] = &gcc_sys_noc_cpuss_ahb_clk.clkr,
[GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
[GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr,
[GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
---
base-commit: 774551425799cb5bbac94e1768fd69eec4f78dd4
change-id: 20240123-gcc-ao-support-dbab551ea4f0
Best regards,
--
Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
next reply other threads:[~2024-02-13 6:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 6:47 Satya Priya Kakitapalli [this message]
2024-03-27 21:35 ` [PATCH v2] clk: qcom: gcc-sm8150: De-register gcc_cpuss_ahb_clk_src Konrad Dybcio
2024-03-29 5:48 ` Satya Priya Kakitapalli (Temp)
2024-04-21 22:29 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240213-gcc-ao-support-v2-1-fd2127e8d8f4@quicinc.com \
--to=quic_skakitap@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_ajipan@quicinc.com \
--cc=quic_imrashai@quicinc.com \
--cc=quic_jkona@quicinc.com \
--cc=quic_tdas@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).