From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Lee Jones <lee@kernel.org>,
UNGLinuxDriver@microchip.com,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Yisen Zhuang <yisen.zhuang@huawei.com>,
Salil Mehta <salil.mehta@huawei.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-mips@vger.kernel.org, linux-mtd@lists.infradead.org,
netdev@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH] dt-bindings: mfd: syscon: Add more simple compatibles
Date: Fri, 10 May 2024 07:30:14 -0500 [thread overview]
Message-ID: <20240510123018.3902184-1-robh@kernel.org> (raw)
Add another batch of various "simple" syscon compatibles which were
undocumented or still documented with old text bindings. Remove the old
text binding docs for the ones which were documented.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
This batch is mostly from arm32 platforms.
---
.../bindings/arm/amlogic/analog-top.txt | 20 -------------
.../bindings/arm/amlogic/assist.txt | 17 -----------
.../bindings/arm/amlogic/bootrom.txt | 17 -----------
.../devicetree/bindings/arm/amlogic/pmu.txt | 18 ------------
.../devicetree/bindings/arm/atmel-sysregs.txt | 29 -------------------
.../devicetree/bindings/arm/axis.txt | 16 ----------
.../arm/cpu-enable-method/al,alpine-smp | 10 -------
.../arm/freescale/fsl,vf610-mscm-cpucfg.txt | 14 ---------
.../bindings/arm/marvell/marvell,dove.txt | 15 ----------
.../devicetree/bindings/arm/spear-misc.txt | 9 ------
.../bindings/clock/ti-keystone-pllctrl.txt | 20 -------------
.../devicetree/bindings/mfd/syscon.yaml | 29 +++++++++++++++++++
.../devicetree/bindings/mips/mscc.txt | 17 -----------
.../devicetree/bindings/mtd/atmel-nand.txt | 9 ------
.../bindings/net/hisilicon-hip04-net.txt | 10 -------
15 files changed, 29 insertions(+), 221 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/assist.txt
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/pmu.txt
delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
delete mode 100644 Documentation/devicetree/bindings/arm/spear-misc.txt
delete mode 100644 Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
deleted file mode 100644
index 101dc21014ec..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Amlogic Meson8 and Meson8b "analog top" registers:
---------------------------------------------------
-
-The analog top registers contain information about the so-called
-"metal revision" (which encodes the "minor version") of the SoC.
-
-Required properties:
-- reg: the register range of the analog top registers
-- compatible: depending on the SoC this should be one of:
- - "amlogic,meson8-analog-top"
- - "amlogic,meson8b-analog-top"
- along with "syscon"
-
-
-Example:
-
- analog_top: analog-top@81a8 {
- compatible = "amlogic,meson8-analog-top", "syscon";
- reg = <0x81a8 0x14>;
- };
diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt
deleted file mode 100644
index 7656812b67b9..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/assist.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b assist registers:
------------------------------------------------
-
-The assist registers contain basic information about the SoC,
-for example the encoded SoC part number.
-
-Required properties:
-- reg: the register range of the assist registers
-- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
-
-
-Example:
-
- assist: assist@7c00 {
- compatible = "amlogic,meson-mx-assist", "syscon";
- reg = <0x7c00 0x200>;
- };
diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
deleted file mode 100644
index 407e27f230ab..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b bootrom:
---------------------------------------
-
-The bootrom register area can be used to access SoC specific
-information, such as the "misc version".
-
-Required properties:
-- reg: the register range of the bootrom registers
-- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
-
-
-Example:
-
- bootrom: bootrom@d9040000 {
- compatible = "amlogic,meson-mx-bootrom", "syscon";
- reg = <0xd9040000 0x10000>;
- };
diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
deleted file mode 100644
index 72f8d08198b6..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Amlogic Meson8 and Meson8b power-management-unit:
--------------------------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : depending on the SoC this should be one of:
- "amlogic,meson8-pmu"
- "amlogic,meson8b-pmu"
-- reg : physical base address and the size of the registers window
-
-Example:
-
- pmu@c81000e4 {
- compatible = "amlogic,meson8b-pmu", "syscon";
- reg = <0xc81000e0 0x18>;
- };
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 67a66bf74895..7374beb5a613 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -41,35 +41,6 @@ Examples:
reg = <0xffffe800 0x200>;
};
-RAMC PHY Controller required properties:
-- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
-- reg: Should contain registers location and length
-
-Example:
-
- ddr3phy: ddr3phy@e3804000 {
- compatible = "microchip,sama7g5-ddr3phy", "syscon";
- reg = <0xe3804000 0x1000>;
-};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
- It also can be "microchip,sam9x60-sfr", "syscon".
-- reg: Should contain registers location and length
-
- sfr@f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt
index ae345e1c8d2b..ebd33a88776f 100644
--- a/Documentation/devicetree/bindings/arm/axis.txt
+++ b/Documentation/devicetree/bindings/arm/axis.txt
@@ -7,22 +7,6 @@ ARTPEC-6 ARM SoC
Required root node properties:
- compatible = "axis,artpec6";
-ARTPEC-6 System Controller
---------------------------
-
-The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
-and resets.
-
-Required properties:
-- compatible: "axis,artpec6-syscon", "syscon"
-- reg: Address and length of the register bank.
-
-Example:
- syscon {
- compatible = "axis,artpec6-syscon", "syscon";
- reg = <0xf8000000 0x48>;
- };
-
ARTPEC-6 Development board:
---------------------------
Required root node properties:
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
index 35e5afb6d9ad..cc7b1402a31f 100644
--- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -27,16 +27,6 @@ Properties:
- reg : Offset and length of the register set for the device
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-
Example:
cpus {
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
deleted file mode 100644
index 44aa3c451ccf..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - CPU Configuration
-
-The MSCM IP contains multiple sub modules, this binding describes the first
-block of registers which contains CPU configuration information.
-
-Required properties:
-- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
-- reg: the register range of the MSCM CPU configuration registers
-
-Example:
- mscm_cpucfg: cpucfg@40001000 {
- compatible = "fsl,vf610-mscm-cpucfg", "syscon";
- reg = <0x40001000 0x800>;
- }
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
index aaaf64c56e44..e10e8525eabd 100644
--- a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
@@ -5,18 +5,3 @@ Boards with a Marvell Dove SoC shall have the following properties:
Required root node property:
- compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
- compatible = "marvell,dove-global-config", "syscon";
- reg = <0xe802c 0x14>;
-};
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
deleted file mode 100644
index e404e2556b4a..000000000000
--- a/Documentation/devicetree/bindings/arm/spear-misc.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-SPEAr Misc configuration
-===========================
-SPEAr SOCs have some miscellaneous registers which are used to configure
-few properties of different peripheral controllers.
-
-misc node required properties:
-
-- compatible Should be "st,spear1340-misc", "syscon".
-- reg: Address range of misc space up to 8K
diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
deleted file mode 100644
index c35cb6c4af4d..000000000000
--- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments keystone pll controller
-
-The main pll controller used to drive theC66x CorePacs, the switch fabric,
-and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
-the NETCP modules) requires a PLL Controller to manage the various clock
-divisions, gating, and synchronization.
-
-Required properties:
-
-- compatible: "ti,keystone-pllctrl", "syscon"
-
-- reg: contains offset/length value for pll controller
- registers space.
-
-Example:
-
-pllctrl: pll-controller@02310000 {
- compatible = "ti,keystone-pllctrl", "syscon";
- reg = <0x02310000 0x200>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 7ed12a938baa..4d289935c08f 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -34,36 +34,59 @@ properties:
anyOf:
- items:
- enum:
+ - al,alpine-sysfabric-service
- allwinner,sun8i-a83t-system-controller
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - altr,l3regs
- altr,sdr-ctl
- amd,pensando-elba-syscon
+ - amlogic,meson-mx-assist
+ - amlogic,meson-mx-bootrom
+ - amlogic,meson8-analog-top
+ - amlogic,meson8b-analog-top
+ - amlogic,meson8-pmu
+ - amlogic,meson8b-pmu
- apm,xgene-csw
- apm,xgene-efuse
- apm,xgene-mcb
- apm,xgene-rb
- apm,xgene-scu
+ - atmel,sama5d2-sfrbu
+ - atmel,sama5d3-nfc-io
+ - atmel,sama5d3-sfrbu
+ - atmel,sama5d4-sfrbu
+ - axis,artpec6-syscon
- brcm,cru-clkset
- brcm,sr-cdru
- brcm,sr-mhb
+ - cirrus,ep7209-syscon1
+ - cirrus,ep7209-syscon2
+ - cirrus,ep7209-syscon3
+ - cnxt,cx92755-uc
- freecom,fsg-cs2-system-controller
- fsl,imx93-aonmix-ns-syscfg
- fsl,imx93-wakeupmix-syscfg
- fsl,ls1088a-reset
+ - fsl,vf610-anatop
+ - fsl,vf610-mscm-cpucfg
- hisilicon,dsa-subctrl
- hisilicon,hi6220-sramctrl
+ - hisilicon,hip04-ppe
- hisilicon,pcie-sas-subctrl
- hisilicon,peri-subctrl
- hpe,gxp-sysreg
- intel,lgm-syscon
- loongson,ls1b-syscon
- loongson,ls1c-syscon
+ - lsi,axxia-syscon
- marvell,armada-3700-cpu-misc
- marvell,armada-3700-nb-pm
- marvell,armada-3700-avs
- marvell,armada-3700-usb2-host-misc
+ - marvell,dove-global-config
+ - mediatek,mt2701-pctl-a-syscfg
- mediatek,mt2712-pctl-a-syscfg
- mediatek,mt6397-pctl-pmic-syscfg
- mediatek,mt8135-pctl-a-syscfg
@@ -71,7 +94,10 @@ properties:
- mediatek,mt8173-pctl-a-syscfg
- mediatek,mt8365-syscfg
- microchip,lan966x-cpu-syscon
+ - microchip,sam9x60-sfr
+ - microchip,sama7g5-ddr3phy
- microchip,sparx5-cpu-syscon
+ - mscc,ocelot-cpu-syscon
- mstar,msc313-pmsleep
- nuvoton,ma35d1-sys
- nuvoton,wpcm450-shm
@@ -86,12 +112,15 @@ properties:
- rockchip,rk3568-qos
- rockchip,rk3588-qos
- rockchip,rv1126-qos
+ - st,spear1340-misc
+ - stericsson,nomadik-pmu
- starfive,jh7100-sysmain
- ti,am62-usb-phy-ctrl
- ti,am62p-cpsw-mac-efuse
- ti,am654-dss-oldi-io-ctrl
- ti,am654-serdes-ctrl
- ti,j784s4-pcie-ctrl
+ - ti,keystone-pllctrl
- const: syscon
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index cc916eaeed0a..e74165696b76 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -25,23 +25,6 @@ Example:
reg = <0x71070000 0x1c>;
};
-
-o CPU system control:
-
-The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
-the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
-endianness, CPU bus control, CPU status.
-
-Required properties:
-- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
-- reg : Should contain registers location and length
-
-Example:
- syscon@70000000 {
- compatible = "mscc,ocelot-cpu-syscon", "syscon";
- reg = <0x70000000 0x2c>;
- };
-
o HSIO regs:
The SoC has a few registers (HSIO) handling miscellaneous functionalities:
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 4598930851d9..e36c35b17873 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -60,15 +60,6 @@ Required properties:
- reg: should contain 2 register ranges. The first one is pointing to the PMECC
block, and the second one to the PMECC_ERRLOC block.
-* SAMA5 NFC I/O bindings:
-
-SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page
-operations. This interface to this logic is placed in a separate I/O range and
-should thus have its own DT node.
-
-- compatible: should be "atmel,sama5d3-nfc-io", "syscon".
-- reg: should contain the I/O range used to interact with the NFC logic.
-
Example:
nfc_io: nfc-io@70000000 {
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
index 464c0dafc617..c09eec6422ac 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -19,16 +19,6 @@ Optional properties:
[1] Documentation/devicetree/bindings/net/ethernet.txt
-* Ethernet ppe node:
-Control rx & tx fifos of all ethernet controllers.
-Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
-Each controller's recv channel start from channel * number (RX_DESC_NUM).
-
-Required properties:
-- compatible: "hisilicon,hip04-ppe", "syscon".
-- reg: address and length of the register set for the device.
-
-
* MDIO bus node:
Required properties:
--
2.43.0
next reply other threads:[~2024-05-10 12:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 12:30 Rob Herring (Arm) [this message]
2024-05-10 20:16 ` [PATCH] dt-bindings: mfd: syscon: Add more simple compatibles Stephen Boyd
2024-05-11 12:43 ` Conor Dooley
2024-05-13 7:55 ` Miquel Raynal
2024-05-13 7:59 ` Conor Dooley
2024-05-13 8:05 ` Miquel Raynal
2024-05-13 13:12 ` AngeloGioacchino Del Regno
2024-05-19 18:43 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510123018.3902184-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=gregory.clement@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pabeni@redhat.com \
--cc=richard@nod.at \
--cc=salil.mehta@huawei.com \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=vigneshr@ti.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).