messages from 2021-06-25 14:37:29 to 2021-06-29 10:24:46 UTC [more...]
[RESEND PATCH v2 0/3] RPMCC for SM6125
2021-06-29 10:24 UTC (3+ messages)
` [RESEND PATCH v2 1/3] rpmcc: Add sm6125 compatible
` [RESEND PATCH v2 2/3] dt-bindings: clk: qcom: smd-rpm: Document SM6125 compatible
[PATCH] clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167
2021-06-29 6:43 UTC
[PATCH] clk: qcom: gdsc: Ensure regulator init state matches GDSC state
2021-06-29 6:34 UTC (3+ messages)
[PATCH v6 0/4] clk: zynqmp: Add firmware specific clock flags
2021-06-29 6:10 UTC (10+ messages)
` [PATCH v6 1/4] clk: zynqmp: Use firmware specific common "
` [PATCH v6 2/4] clk: zynqmp: Use firmware specific divider "
` [PATCH v6 3/4] clk: zynqmp: Use firmware specific mux "
` [PATCH v6 4/4] clk: zynqmp: Handle divider specific read only flag
[PATCH 1/2] clk: lmk04832: Depend on SPI
2021-06-29 6:07 UTC (2+ messages)
` [PATCH 2/2] clk: lmk04832: Use of match table
[PATCH 0/5] Add MSM8939 APCS/A53PLL clock support
2021-06-29 2:37 UTC (8+ messages)
` [PATCH 1/5] clk: qcom: apcs-msm8916: Flag a53mux instead of a53pll as critical
` [PATCH 3/5] clk: qcom: apcs-msm8916: Retrieve clock name from DT
` [PATCH 5/5] clk: qcom: a53-pll: Add MSM8939 a53pll clocks
[clk:clk-lmk04832 2/3] clk-lmk04832.c:undefined reference to `spi_get_device_id'
2021-06-28 23:19 UTC (2+ messages)
[PATCH v5 00/11] Add new clocks and fix bugs for Ingenic SoCs
2021-06-28 22:32 UTC (13+ messages)
` [PATCH v5 01/11] clk: JZ4780: Add function for disable the second core
` [PATCH v5 02/11] clk: Ingenic: Adjust cgu code to make it compatible with I2S PLL
` [PATCH v5 03/11] dt-bindings: clock: Add missing clocks for Ingenic SoCs
` [PATCH v5 04/11] clk: Ingenic: Fix problem of MAC clock in Ingenic X1000 and X1830
` [PATCH v5 05/11] clk: Ingenic: Add missing clocks for Ingenic SoCs
` [PATCH v5 06/11] clk: Ingenic: Clean up and reformat the code
` [PATCH v5 07/11] dt-bindings: clock: Add documentation for JZ4775 and X2000 bindings
` [PATCH v5 08/11] dt-bindings: clock: Add JZ4775 clock bindings
` [PATCH v5 09/11] dt-bindings: clock: Add X2000 "
` [PATCH v5 10/11] clk: Ingenic: Add CGU driver for JZ4775
` [PATCH v5 11/11] clk: Ingenic: Add CGU driver for X2000
[PATCH 1/2] clk: imx8mm: use correct mux type for clkout path
2021-06-28 21:15 UTC (2+ messages)
` [PATCH 2/2] clk: imx8mn: "
[PATCH v3 0/9] clk: cs2000-cp: add dynamic mode and more features
2021-06-28 16:03 UTC (4+ messages)
` [PATCH v3 3/9] dt-bindings: clock: cs2000-cp: make clk_in optional
[PATCH v9 01/22] dt-bindings: ARM: Mediatek: Add new document bindings of imp i2c wrapper controller
2021-06-28 12:56 UTC (10+ messages)
[clk:clk-lmk04832 2/3] drivers/clk/clk-lmk04832.c:1271:34: warning: unused variable 'lmk04832_of_id'
2021-06-28 12:20 UTC
[PATCH v4 00/10] Update clock definitions
2021-06-28 12:18 UTC (10+ messages)
` [PATCH v4 01/10] drivers: clk: renesas: renesas-rzg2l-cpg: Add multi clock PM support
` [PATCH v4 02/10] drivers: clk: renesas: r9a07g044-cpg: Rename divider table
` [PATCH v4 03/10] drivers: clk: renesas: r9a07g044-cpg: Fix P1 Clock
` [PATCH v4 04/10] drivers: clk: renesas: r9a07g044-cpg: Add P2 Clock support
` [PATCH v4 06/10] drivers: clk: renesas: r9a07g044-cpg: Update {GIC,IA55,SCIF} clock/reset entries
` [PATCH v4 08/10] drivers: clk: renesas: r9a07g044-cpg: Add I2C clocks/resets
` [PATCH v4 09/10] drivers: clk: renesas: r9a07g044-cpg: Add DMAC clocks/resets
[PATCH v2] clk: qcom: clk-alpha-pll: fix CAL_L write in alpha_pll_fabia_prepare
2021-06-28 10:55 UTC (3+ messages)
[RESEND PATCH v3 00/11] Introduce STM32MP1 RCC in secured mode
2021-06-28 7:17 UTC (25+ messages)
` [RESEND PATCH v3 01/11] clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock
` [RESEND PATCH v3 02/11] clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' "
` [RESEND PATCH v3 03/11] clk: stm32mp1: remove intermediate pll clocks
` [RESEND PATCH v3 04/11] clk: stm32mp1: convert to module driver
` [RESEND PATCH v3 05/11] clk: stm32mp1: move RCC reset controller into RCC clock driver
` [RESEND PATCH v3 06/11] reset: stm32mp1: remove stm32mp1 reset
` [RESEND PATCH v3 07/11] dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
` [RESEND PATCH v3 08/11] dt-bindings: reset: add IDs for SCMI reset domains "
` [RESEND PATCH v3 09/11] dt-bindings: reset: add MCU HOLD BOOT ID "
` [RESEND PATCH v3 10/11] dt-bindings: clock: stm32mp1 new compatible for secure rcc
` [RESEND PATCH v3 11/11] clk: stm32mp1: new compatible for secure RCC support
[PATCH v5 0/4] clk: zynqmp: Add firmware specific clock flags
2021-06-28 6:59 UTC (4+ messages)
` [PATCH v5 1/4] clk: zynqmp: Use firmware specific common "
[PATCH v4 0/5] Misc Ingenic patches
2021-06-28 4:46 UTC (8+ messages)
` [PATCH v4 1/5] MIPS: X1830: Respect cell count of common properties
` [PATCH v4 2/5] dt-bindings: clock: Add documentation for MAC PHY control bindings
` [PATCH v4 3/5] MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs
` [PATCH v4 4/5] MIPS: CI20: Reduce clocksource to 750 kHz
` [PATCH v4 5/5] MIPS: CI20: Add second percpu timer for SMP
[PATCH v8 0/2] Enable Hi3559A SOC clock
2021-06-28 3:06 UTC (5+ messages)
` [PATCH v8 1/2] dt-bindings: Document the hi3559a clock bindings
` [PATCH v8 2/2] clk: hisilicon: Add clock driver for hi3559A SoC
[PATCH v3 0/9] Si5341 driver updates
2021-06-28 3:03 UTC (19+ messages)
` [PATCH v3 1/9] dt-bindings: clock: clk-si5341: Add new attributes
` [PATCH v3 2/9] clk: si5341: Wait for DEVICE_READY on startup
` [PATCH v3 3/9] clk: si5341: Avoid divide errors due to bogus register contents
` [PATCH v3 4/9] clk: si5341: Check for input clock presence and PLL lock on startup
` [PATCH v3 5/9] clk: si5341: Update initialization magic
` [PATCH v3 6/9] clk: si5341: Allow different output VDD_SEL values
` [PATCH v3 7/9] clk: si5341: Add silabs,xaxb-ext-clk property
` [PATCH v3 8/9] clk: si5341: Add silabs,iovdd-33 property
` [PATCH v3 9/9] clk: si5341: Add sysfs properties to allow checking/resetting device faults
[PATCH -next] drivers: ti: remove redundant error message in adpll.c
2021-06-28 2:56 UTC (2+ messages)
[PATCH v4 0/7] clk: st: embed clock outputs within drivers
2021-06-28 2:55 UTC (16+ messages)
` [PATCH v4 1/7] clk: st: clkgen-pll: remove unused variable of struct clkgen_pll
` [PATCH v4 2/7] clk: st: flexgen: embed soc clock outputs within compatible data
` [PATCH v4 3/7] dt-bindings: clock: st: flexgen: add new introduced compatible
` [PATCH v4 4/7] clk: st: clkgen-pll: embed soc clock outputs within compatible data
` [PATCH v4 5/7] dt-bindings: clock: st: clkgen-pll: add new introduced compatible
` [PATCH v4 6/7] clk: st: clkgen-fsyn: embed soc clock outputs within compatible data
` [PATCH v4 7/7] dt-bindings: clock: st: clkgen-fsyn: add new introduced compatible
[PATCH v2 0/6] clk: Ingenic JZ4760(B) support
2021-06-28 2:50 UTC (13+ messages)
` [PATCH v2 1/6] dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
` [PATCH v2 2/6] clk: Support bypassing dividers
` [PATCH v2 3/6] clk: ingenic: Read bypass register only when there is one
` [PATCH v2 4/6] clk: ingenic: Remove pll_info.no_bypass_bit
` [PATCH v2 5/6] clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
` [PATCH v2 6/6] clk: ingenic: Add support for the JZ4760
[PATCH v2 1/2] clk: qcom: add support for SM8350 DISPCC
2021-06-28 2:39 UTC (5+ messages)
` [PATCH v2 2/2] dt-bindings: clock: add QCOM SM8350 display clock bindings
[PATCH v2 1/2] dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
2021-06-28 2:31 UTC (4+ messages)
` [PATCH v2 2/2] clk: vc5: Add properties for configuring SD/OE behavior
[PATCH 1/1] clk: tegra: tegra124-emc: Fix possible memory leak
2021-06-28 1:52 UTC (6+ messages)
[PATCH v3 0/6] Improve clock support for Actions S500 SoC
2021-06-28 1:47 UTC (13+ messages)
` [PATCH v3 1/6] clk: actions: Fix UART clock dividers on Owl "
` [PATCH v3 2/6] clk: actions: Fix SD clocks factor table "
` [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks "
` [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain "
` [PATCH v3 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions "
` [PATCH v3 6/6] clk: actions: Add NIC and ETHERNET clock support "
[PATCH 0/9] Drop ROHM BD70528 support
2021-06-28 1:43 UTC (3+ messages)
` [PATCH 5/9] clk: bd718xx: Drop "
[PATCH v5 0/3] add support for the lmk04832
2021-06-28 1:11 UTC (7+ messages)
` [PATCH v5 1/3] clk: "
` [PATCH v5 2/3] clk: lmk04832: add support for digital delay
` [PATCH v5 3/3] dt-bindings: clock: add ti,lmk04832 bindings
[PATCH 0/9] MIPS: Migrate pistachio to generic kernel
2021-06-28 1:06 UTC (13+ messages)
` [PATCH 1/9] MIPS: generic: Allow generating FIT image for Marduk board
` [PATCH 2/9] MIPS: DTS: Pistachio add missing cpc and cdmm
` [PATCH 3/9] clk: pistachio: Make it selectable for generic MIPS kernel
` [PATCH 4/9] clocksource/drivers/pistachio: Make it seletable for MIPS
` [PATCH 5/9] phy: pistachio-usb: Depend on MIPS || COMPILE_TEST
` [PATCH 6/9] pinctrl: pistachio: Make it as a option
` [PATCH 7/9] MIPS: config: generic: Add config for Marduk board
` [PATCH 8/9] MIPS: Retire MACH_PISTACHIO
` [PATCH 9/9] MIPS: Make a alias for pistachio_defconfig
[PATCH] clk: socfpga: clk-pll: Remove unused variable 'rc'
2021-06-28 0:33 UTC (2+ messages)
[PATCH v2 0/3] clk: qcom: Add camera clock controller driver for SM8250
2021-06-28 0:16 UTC (7+ messages)
` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: add support for zonda pll
` [PATCH v2 2/3] dt-bindings: clock: add QCOM SM8250 camera clock bindings
` [PATCH v2 3/3] clk: qcom: Add camera clock controller driver for SM8250
[PATCH] clk: qcom: ipq8074: fix PCI-E clock oops
2021-06-28 0:07 UTC (2+ messages)
[PATCH -next] clk/qcom: Remove unused variables
2021-06-28 0:04 UTC (2+ messages)
[PATCH v2] clk: qcom: smd-rpmcc: Add support for MSM8226 rpm clocks
2021-06-28 0:02 UTC (2+ messages)
[PATCH v2 0/5] Samsung Galaxy S III Neo Initial DTS
2021-06-28 0:01 UTC (5+ messages)
` [PATCH v2 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
` [PATCH v2 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226
[PATCH v4 1/2] dt-bindings: clk: qcom: gcc-sm6125: Document SM6125 GCC driver
2021-06-27 23:55 UTC (3+ messages)
` [PATCH v4 2/2] clk: qcom: Add SM6125 (TRINKET) "
[PATCH v2] clk: qcom: gcc: Add support for a new frequency for SC7280
2021-06-27 23:46 UTC (2+ messages)
[PATCHv3 1/4] clk: agilex/stratix10: remove noc_clk
2021-06-27 23:41 UTC (8+ messages)
` [PATCHv3 2/4] clk: agilex/stratix10: fix bypass representation
` [PATCHv3 3/4] clk: agilex/stratix10: add support for the 2nd bypass
` [PATCHv3 4/4] clk: agilex/stratix10/n5x: fix how the bypass_reg is handled
[PATCH v3 0/3] clk: meson: rounding for fast clocks on 32-bit SoCs
2021-06-27 22:39 UTC (4+ messages)
` [PATCH v3 1/3] clk: divider: Add re-usable determine_rate implementations
` [PATCH v3 2/3] clk: divider: Switch from .round_rate to .determine_rate by default
` [PATCH v3 3/3] clk: meson: regmap: switch to determine_rate for the dividers
[PATCH v2 0/5] Add rpmcc and rpmpd for SM4250/6115
2021-06-27 18:59 UTC (6+ messages)
` [PATCH v2 1/5] dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
` [PATCH v2 2/5] dt-bindings: clock: qcom: rpmcc: Document "
` [PATCH v2 3/5] clk: qcom: smd: Add support for SM6115 rpm clocks
` [PATCH v2 4/5] dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
` [PATCH v2 5/5] drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
[PATCH v2 0/2] Add GCC for SM4250/6115
2021-06-27 18:55 UTC (3+ messages)
` [PATCH v2 1/2] dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC
` [PATCH v2 2/2] clk: qcom: Add Global Clock controller (GCC) driver for SM6115
[PATCH] clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator
2021-06-25 23:23 UTC (4+ messages)
[PATCH] clk: zynqmp: Check the return type
2021-06-25 23:13 UTC (2+ messages)
[PATCH] clk: zynqmp: pll: Remove some dead code
2021-06-25 23:09 UTC (2+ messages)
[PATCH v3] clk: zynqmp: fix compile testing without ZYNQMP_FIRMWARE
2021-06-25 23:06 UTC (2+ messages)
[PATCH v6] dt-bindings: clk: versaclock5: Miscellaneous fixes and improvements:
2021-06-25 22:44 UTC (3+ messages)
[PATCH] dt-bindings: clock: gpio-mux-clock: Convert to json-schema
2021-06-25 22:42 UTC (2+ messages)
[PATCH v1 0/2] Add sync_state() support to clock framework
2021-06-25 22:37 UTC (3+ messages)
` [PATCH v1 2/2] clk: Add support for sync_state()
[PATCH v3 00/10] Update clock definitions
2021-06-25 19:54 UTC (8+ messages)
` [PATCH v3 01/10] drivers: clk: renesas: renesas-rzg2l-cpg: Add multi clock PM support
` [PATCH v3 02/10] drivers: clk: renesas: r9a07g044-cpg: Rename divider table
` [PATCH v3 03/10] drivers: clk: renesas: r9a07g044-cpg: Fix P1 Clock
` [PATCH v3 04/10] drivers: clk: renesas: r9a07g044-cpg: Add P2 Clock support
` [PATCH v3 06/10] drivers: clk: renesas: r9a07g044-cpg: Update {GIC,IA55,SCIF} clock/reset entries
` [PATCH v3 08/10] drivers: clk: renesas: r9a07g044-cpg: Add I2C clocks/resets
` [PATCH v3 09/10] drivers: clk: renesas: r9a07g044-cpg: Add DMAC clocks/resets
[PATCH v2 00/11] Update clock definitions
2021-06-25 18:32 UTC (16+ messages)
` [PATCH v2 02/11] drivers: clk: renesas: r9a07g044-cpg: Rename divider table
` [PATCH v2 06/11] drivers: clk: renesas: renesas-rzg2l-cpg: Separate reset from module clocks
` [PATCH v2 07/11] drivers: clk: renesas: r9a07g044-cpg: Update {GIC,IA55,SCIF} clock/reset entries
` [PATCH v2 09/11] drivers: clk: renesas: r9a07g044-cpg: Add I2C clocks/resets
` [PATCH v2 10/11] drivers: clk: renesas: r9a07g044-cpg: Add DMAC clocks/resets
[PATCH 00/10] serial: mvebu-uart: Fixes and new support for higher baudrates
2021-06-25 18:11 UTC (10+ messages)
` [PATCH v2 00/11] "
` [PATCH v2 07/11] math64: New DIV_U64_ROUND_CLOSEST helper
` [PATCH v2 11/11] serial: mvebu-uart: implement support for baudrates higher than 230400
[PATCH v7 0/6] clk: provide new devm helpers for prepared and enabled clocks
2021-06-25 17:14 UTC (3+ messages)
` [PULL] Add variants of devm_clk_get for prepared and enabled clocks "
[PATCH v3 0/4] Misc Ingenic patches
2021-06-25 16:32 UTC (6+ messages)
` [PATCH v3 4/4] MIPS: CI20: Add second percpu timer for SMP
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).