Linux-Devicetree Archive mirror
 help / color / mirror / Atom feed
* [PATCH] mtd: Use of_property_read_bool() for boolean properties
@ 2023-03-10 14:47 Rob Herring
  2023-03-22 16:08 ` Miquel Raynal
  0 siblings, 1 reply; 2+ messages in thread
From: Rob Herring @ 2023-03-10 14:47 UTC (permalink / raw
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Vladimir Zapolskiy, Tudor Ambarus, Pratyush Yadav, Michael Walle
  Cc: devicetree, linux-mtd, linux-kernel, linux-arm-kernel

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/mtd/devices/spear_smi.c             | 4 ++--
 drivers/mtd/maps/sun_uflash.c               | 2 +-
 drivers/mtd/mtdcore.c                       | 2 +-
 drivers/mtd/nand/raw/fsmc_nand.c            | 2 +-
 drivers/mtd/nand/raw/nand_macronix.c        | 5 ++---
 drivers/mtd/spi-nor/controllers/nxp-spifi.c | 4 ++--
 6 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index f58742486d3d..cc17133be297 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -820,8 +820,8 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev,
 		pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]);
 		pdata->board_flash_info->size = be32_to_cpup(&addr[1]);
 
-		if (of_get_property(pp, "st,smi-fast-mode", NULL))
-			pdata->board_flash_info->fast_mode = 1;
+		pdata->board_flash_info->fast_mode =
+			of_property_read_bool(pp, "st,smi-fast-mode");
 
 		i++;
 	}
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 6c0c91bfec05..860b19f77090 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -112,7 +112,7 @@ static int uflash_probe(struct platform_device *op)
 	/* Flashprom must have the "user" property in order to
 	 * be used by this driver.
 	 */
-	if (!of_find_property(dp, "user", NULL))
+	if (!of_property_read_bool(dp, "user"))
 		return -ENODEV;
 
 	return uflash_devinit(op, dp);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 0feacb9fbdac..5ba4227daf7f 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -739,7 +739,7 @@ int add_mtd_device(struct mtd_info *mtd)
 
 	mutex_unlock(&mtd_table_mutex);
 
-	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL)) {
+	if (of_property_read_bool(mtd_get_of_node(mtd), "linux,rootfs")) {
 		if (IS_BUILTIN(CONFIG_MTD)) {
 			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
 			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 6b2bda815b88..0d34d433b732 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -880,7 +880,7 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
 		}
 	}
 
-	if (of_get_property(np, "nand-skip-bbtscan", NULL))
+	if (of_property_read_bool(np, "nand-skip-bbtscan"))
 		nand->options |= NAND_SKIP_BBTSCAN;
 
 	host->dev_timings = devm_kzalloc(&pdev->dev,
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 1472f925f386..385957eb6762 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -93,14 +93,13 @@ static void macronix_nand_onfi_init(struct nand_chip *chip)
 	struct nand_parameters *p = &chip->parameters;
 	struct nand_onfi_vendor_macronix *mxic;
 	struct device_node *dn = nand_get_flash_node(chip);
-	int rand_otp = 0;
+	int rand_otp;
 	int ret;
 
 	if (!p->onfi)
 		return;
 
-	if (of_find_property(dn, "mxic,enable-randomizer-otp", NULL))
-		rand_otp = 1;
+	rand_otp = of_property_read_bool(dn, "mxic,enable-randomizer-otp");
 
 	mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor;
 	/* Subpage write is prohibited in randomizer operatoin */
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index ab3990e6ac25..794c7b7d5c92 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -305,10 +305,10 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
 		}
 	}
 
-	if (of_find_property(np, "spi-cpha", NULL))
+	if (of_property_read_bool(np, "spi-cpha"))
 		mode |= SPI_CPHA;
 
-	if (of_find_property(np, "spi-cpol", NULL))
+	if (of_property_read_bool(np, "spi-cpol"))
 		mode |= SPI_CPOL;
 
 	/* Setup control register defaults */
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH] mtd: Use of_property_read_bool() for boolean properties
  2023-03-10 14:47 [PATCH] mtd: Use of_property_read_bool() for boolean properties Rob Herring
@ 2023-03-22 16:08 ` Miquel Raynal
  0 siblings, 0 replies; 2+ messages in thread
From: Miquel Raynal @ 2023-03-22 16:08 UTC (permalink / raw
  To: Rob Herring, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Vladimir Zapolskiy, Tudor Ambarus,
	Pratyush Yadav, Michael Walle
  Cc: devicetree, linux-mtd, linux-kernel, linux-arm-kernel

On Fri, 2023-03-10 at 14:47:15 UTC, Rob Herring wrote:
> It is preferred to use typed property access functions (i.e.
> of_property_read_<type> functions) rather than low-level
> of_get_property/of_find_property functions for reading properties.
> Convert reading boolean properties to to of_property_read_bool().
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-03-22 16:08 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-03-10 14:47 [PATCH] mtd: Use of_property_read_bool() for boolean properties Rob Herring
2023-03-22 16:08 ` Miquel Raynal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).