From: Farouk Bouabid <farouk.bouabid@cherry.de>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
Peter Rosin <peda@axentia.se>,
Andi Shyti <andi.shyti@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Farouk Bouabid <farouk.bouabid@cherry.de>,
Quentin Schulz <quentin.schulz@cherry.de>,
Heiko Stuebner <heiko@sntech.de>,
Quentin Schulz <quentin.schulz@theobroma-systems.com>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH v2 0/7] Add Mule I2C multiplexer support
Date: Mon, 06 May 2024 13:37:51 +0200 [thread overview]
Message-ID: <20240506-dev-mule-i2c-mux-v2-0-a91c954f65d7@cherry.de> (raw)
Mule is an mcu that emulates a set of i2c devices which are reachable
through an i2c-mux.
The emulated devices share a single i2c address with the mux core itself
where the requested register is what determines which logic is executed
(muxing logic or device logic):
1- The devices on the mux core can be selected (muxing functionality) by
writing the appropriate device number to an i2c config register (0xff)
that is not used by any device logic.
2- Any access to a register other than the config register will be
handled by the previously selected device.
+-------------------------------------------------------+
| Mule |
| +---------------+ |
----+-(1)->|Config register|-----+ |
| | +---------------+ | |
| | V_ |
| | | \ +--------+ |
| | | \-------->| dev #0 | |
| | | | +--------+ |
| | | M |-------->| dev #1 | |
| +-----------(2)------------->| U | +--------+ |
| | X |-------->| dev #2 | |
| | | +--------+ |
| | /-------->| dev #3 | |
| |__/ +--------+ |
+-------------------------------------------------------+
The current i2c-mux implementation does not allow the mux core to use the
i2c address of a child device. As a workaround, A new i2c-adapter quirk is
introduced to skip the check for conflict between a child device and the
mux core i2c address when adding the child device.
This patch-series adds support for this multiplexer. Mule is integrated
as part of rk3399-puma, px30-ringneck, rk3588-tiger and rk3588-jaguar
boards.
To: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: Peter Rosin <peda@axentia.se>
To: Andi Shyti <andi.shyti@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Quentin Schulz <quentin.schulz@theobroma-systems.com>
To: Heiko Stuebner <heiko@sntech.de>
To: Quentin Schulz <quentin.schulz@cherry.de>
Cc: linux-i2c@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Changes in v2:
- Add i2c-adapter quirks to skip checking for conflict between the mux core
and a child device address.
- Rename dt-binding to "tsd,mule-i2c-mux.yaml"
- Add Mule description to kconfig
- Fix indentation
- Move device table after probe
- Link to v1: https://lore.kernel.org/r/20240426-dev-mule-i2c-mux-v1-0-045a482f6ffb@theobroma-systems.com
---
Farouk Bouabid (7):
i2c: mux: add the ability to share mux core address with child nodes
dt-bindings: i2c: mux: mule: add dt-bindings for mule i2c multiplexer
i2c: muxes: add support for mule i2c multiplexer
arm64: dts: rockchip: add mule i2c mux (0x18) on rk3399-puma
arm64: dts: rockchip: add mule i2c mux (0x18) on rk3588-tiger
arm64: dts: rockchip: add mule i2c mux (0x18) on px30-ringneck
arm64: dts: rockchip: add mule i2c mux (0x18) on rk3588-jaguar
.../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 80 +++++++++++
arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi | 20 ++-
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 20 ++-
arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts | 19 ++-
arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 19 ++-
drivers/i2c/i2c-core-base.c | 6 +-
drivers/i2c/i2c-mux.c | 25 +++-
drivers/i2c/muxes/Kconfig | 18 +++
drivers/i2c/muxes/Makefile | 1 +
drivers/i2c/muxes/i2c-mux-mule.c | 157 +++++++++++++++++++++
include/linux/i2c-mux.h | 1 +
include/linux/i2c.h | 7 +
12 files changed, 361 insertions(+), 12 deletions(-)
---
base-commit: 23918f4e52d072b96a4d909e91298b8dd6ad4325
change-id: 20240404-dev-mule-i2c-mux-9103cde07021
Best regards,
--
Farouk Bouabid <farouk.bouabid@cherry.de>
next reply other threads:[~2024-05-06 12:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 11:37 Farouk Bouabid [this message]
2024-05-06 11:37 ` [PATCH v2 1/7] i2c: mux: add the ability to share mux core address with child nodes Farouk Bouabid
2024-05-06 21:26 ` Peter Rosin
2024-05-07 9:48 ` Quentin Schulz
2024-05-06 11:37 ` [PATCH v2 2/7] dt-bindings: i2c: mux: mule: add dt-bindings for mule i2c multiplexer Farouk Bouabid
2024-05-06 20:26 ` Rob Herring (Arm)
2024-05-06 11:37 ` [PATCH v2 3/7] i2c: muxes: add support " Farouk Bouabid
2024-05-06 11:37 ` [PATCH v2 4/7] arm64: dts: rockchip: add mule i2c mux (0x18) on rk3399-puma Farouk Bouabid
2024-05-06 11:37 ` [PATCH v2 5/7] arm64: dts: rockchip: add mule i2c mux (0x18) on rk3588-tiger Farouk Bouabid
2024-05-06 11:37 ` [PATCH v2 6/7] arm64: dts: rockchip: add mule i2c mux (0x18) on px30-ringneck Farouk Bouabid
2024-05-06 11:37 ` [PATCH v2 7/7] arm64: dts: rockchip: add mule i2c mux (0x18) on rk3588-jaguar Farouk Bouabid
2024-05-06 20:40 ` [PATCH v2 0/7] Add Mule I2C multiplexer support Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240506-dev-mule-i2c-mux-v2-0-a91c954f65d7@cherry.de \
--to=farouk.bouabid@cherry.de \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=peda@axentia.se \
--cc=quentin.schulz@cherry.de \
--cc=quentin.schulz@theobroma-systems.com \
--cc=robh@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).