From: Joy Zou <joy.zou@nxp.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
imx@lists.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM
ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Cc: Joy Zou <joy.zou@nxp.com>
Subject: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label
Date: Thu, 9 May 2024 09:57:08 +0800 [thread overview]
Message-ID: <20240509015709.3668405-1-joy.zou@nxp.com> (raw)
Reorder lpi2c2 and lpi2c3 label in alphabetical order.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
.../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++---------
1 file changed, 105 insertions(+), 112 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index d400d85f42a9..6be1eb920c02 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -105,6 +105,104 @@ &mu2 {
status = "okay";
};
+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <610000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <670000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1060000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <840000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&lpi2c3 {
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +211,13 @@ &lpi2c3 {
pinctrl-0 = <&pinctrl_lpi2c3>;
status = "okay";
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+
ptn5110: tcpc@50 {
compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
@@ -304,118 +409,6 @@ &wdog3 {
status = "okay";
};
-&lpi2c2 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_lpi2c2>;
- pinctrl-1 = <&pinctrl_lpi2c2>;
- status = "okay";
-
- pcal6524: gpio@22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcal6524>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- };
-
- pmic@25 {
- compatible = "nxp,pca9451a";
- reg = <0x25>;
- interrupt-parent = <&pcal6524>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-
- regulators {
- buck1: BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <610000>;
- regulator-max-microvolt = <950000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <670000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <1060000>;
- regulator-max-microvolt = <1140000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <840000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo5: LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&lpi2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpi2c3>;
- status = "okay";
-
- pcf2131: rtc@53 {
- compatible = "nxp,pcf2131";
- reg = <0x53>;
- interrupt-parent = <&pcal6524>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
--
2.37.1
next reply other threads:[~2024-05-09 1:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-09 1:57 Joy Zou [this message]
2024-05-09 3:36 ` [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240509015709.3668405-1-joy.zou@nxp.com \
--to=joy.zou@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).