* [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
@ 2023-01-27 21:14 ` Heiner Kallweit
0 siblings, 0 replies; 7+ messages in thread
From: Heiner Kallweit @ 2023-01-27 21:14 UTC (permalink / raw
To: Rob Herring, Krzysztof Kozlowski, Neil Armstrong, Kevin Hilman,
Jerome Brunet, Martin Blumenstingl, Thomas Gleixner, Marc Zyngier
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
open list:ARM/Amlogic Meson...
Convert Amlogic Meson GPIO interrupt controller binding to yaml.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- consider that more than one compatible may be set
- remove bus part from example
---
.../amlogic,meson-gpio-intc.txt | 38 --------
.../amlogic,meson-gpio-intc.yaml | 86 +++++++++++++++++++
2 files changed, 86 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index bde63f8f0..000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
- "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
- "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
- "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
- "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
- "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
- "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
- "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
- "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
- "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
- are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
- compatible = "amlogic,meson-gxbb-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x9880 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 000000000..801f9db02
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Meson SoCs contains an interrupt controller which is able to watch the SoC
+ pads and generate an interrupt on edge or level. The controller is essentially
+ a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+ or level and polarity. It does not expose all 256 mux inputs because the
+ documentation shows that the upper part is not mapped to any pad. The actual
+ number of interrupt exposed depends on the SoC.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ minItems: 1
+ maxItems: 2
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gpio-intc
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-a1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - items:
+ - enum:
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - const: amlogic,meson-gpio-intc
+ - items:
+ - const: amlogic,meson-gpio-intc
+ - enum:
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ amlogic,channel-interrupts:
+ description: Array with the upstream hwirq numbers
+ minItems: 8
+ maxItems: 12
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc";
+ reg = <0x9880 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
--
2.39.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
@ 2023-03-12 21:29 Heiner Kallweit
2023-03-30 5:53 ` Heiner Kallweit
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Heiner Kallweit @ 2023-03-12 21:29 UTC (permalink / raw
To: Rob Herring, Krzysztof Kozlowski, Thomas Gleixner, Marc Zyngier,
Jerome Brunet, Neil Armstrong, Martin Blumenstingl, Kevin Hilman
Cc: open list:ARM/Amlogic Meson...,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Convert Amlogic Meson GPIO interrupt controller binding to yaml.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
- consider that more than one compatible may be set
- remove bus part from example
- remove minItem/maxItem properties for compatible
- reduce compatible fallback complexity
- add that 8 or 12 GIC interrupts can be used
- fix typo
---
.../amlogic,meson-gpio-intc.txt | 38 ----------
.../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
2 files changed, 72 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index bde63f8f0..000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
- "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
- "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
- "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
- "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
- "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
- "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
- "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
- "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
- "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
- are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
- compatible = "amlogic,meson-gxbb-gpio-intc",
- "amlogic,meson-gpio-intc";
- reg = <0x0 0x9880 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 000000000..fe7ef1916
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+ - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+ Meson SoCs contains an interrupt controller which is able to watch the SoC
+ pads and generate an interrupt on edge or level. The controller is essentially
+ a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+ edge or level and polarity. It does not expose all 256 mux inputs because the
+ documentation shows that the upper part is not mapped to any pad. The actual
+ number of interrupts exposed depends on the SoC.
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,meson-gpio-intc
+ - items:
+ - enum:
+ - amlogic,meson8-gpio-intc
+ - amlogic,meson8b-gpio-intc
+ - amlogic,meson-gxbb-gpio-intc
+ - amlogic,meson-gxl-gpio-intc
+ - amlogic,meson-axg-gpio-intc
+ - amlogic,meson-g12a-gpio-intc
+ - amlogic,meson-sm1-gpio-intc
+ - amlogic,meson-a1-gpio-intc
+ - amlogic,meson-s4-gpio-intc
+ - const: amlogic,meson-gpio-intc
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ amlogic,channel-interrupts:
+ description: Array with the upstream hwirq numbers
+ minItems: 8
+ maxItems: 12
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x9880 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
--
2.39.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-03-12 21:29 [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
@ 2023-03-30 5:53 ` Heiner Kallweit
2023-06-20 7:33 ` Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
2 siblings, 0 replies; 7+ messages in thread
From: Heiner Kallweit @ 2023-03-30 5:53 UTC (permalink / raw
To: Rob Herring, Krzysztof Kozlowski, Thomas Gleixner, Marc Zyngier,
Jerome Brunet, Neil Armstrong, Martin Blumenstingl, Kevin Hilman
Cc: open list:ARM/Amlogic Meson...,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
On 12.03.2023 22:29, Heiner Kallweit wrote:
> Convert Amlogic Meson GPIO interrupt controller binding to yaml.
>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> - consider that more than one compatible may be set
> - remove bus part from example
> - remove minItem/maxItem properties for compatible
> - reduce compatible fallback complexity
> - add that 8 or 12 GIC interrupts can be used
> - fix typo
> ---
> .../amlogic,meson-gpio-intc.txt | 38 ----------
> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
> 2 files changed, 72 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>
Who's going to take this patch?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-03-12 21:29 [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-03-30 5:53 ` Heiner Kallweit
@ 2023-06-20 7:33 ` Neil Armstrong
2023-06-20 7:36 ` Krzysztof Kozlowski
2023-06-22 7:57 ` Neil Armstrong
2 siblings, 1 reply; 7+ messages in thread
From: Neil Armstrong @ 2023-06-20 7:33 UTC (permalink / raw
To: Thomas Gleixner, Marc Zyngier, Krzysztof Kozlowski, Rob Herring
Cc: Heiner Kallweit, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
open list:ARM/Amlogic Meson...,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Hi,
On 12/03/2023 22:29, Heiner Kallweit wrote:
> Convert Amlogic Meson GPIO interrupt controller binding to yaml.
>
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> - consider that more than one compatible may be set
> - remove bus part from example
> - remove minItem/maxItem properties for compatible
> - reduce compatible fallback complexity
> - add that 8 or 12 GIC interrupts can be used
> - fix typo
> ---
> .../amlogic,meson-gpio-intc.txt | 38 ----------
> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
> 2 files changed, 72 insertions(+), 38 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
Gentle ping, this patch is fully reviewed and is lying on the list for the last 3 months.
Thanks,
Neil
<snip>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-06-20 7:33 ` Neil Armstrong
@ 2023-06-20 7:36 ` Krzysztof Kozlowski
2023-06-20 7:41 ` neil.armstrong
0 siblings, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2023-06-20 7:36 UTC (permalink / raw
To: neil.armstrong, Thomas Gleixner, Marc Zyngier,
Krzysztof Kozlowski, Rob Herring
Cc: Heiner Kallweit, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
open list:ARM/Amlogic Meson...,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
On 20/06/2023 09:33, Neil Armstrong wrote:
> Hi,
>
> On 12/03/2023 22:29, Heiner Kallweit wrote:
>> Convert Amlogic Meson GPIO interrupt controller binding to yaml.
>>
>> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> - consider that more than one compatible may be set
>> - remove bus part from example
>> - remove minItem/maxItem properties for compatible
>> - reduce compatible fallback complexity
>> - add that 8 or 12 GIC interrupts can be used
>> - fix typo
>> ---
>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>
> Gentle ping, this patch is fully reviewed and is lying on the list for the last 3 months.
Maybe just take it through your Amlogic SoC tree in such case? It's less
preferred than subsystem, but still what matters is to get this merged.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-06-20 7:36 ` Krzysztof Kozlowski
@ 2023-06-20 7:41 ` neil.armstrong
0 siblings, 0 replies; 7+ messages in thread
From: neil.armstrong @ 2023-06-20 7:41 UTC (permalink / raw
To: Krzysztof Kozlowski, Thomas Gleixner, Marc Zyngier,
Krzysztof Kozlowski, Rob Herring
Cc: Heiner Kallweit, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
open list:ARM/Amlogic Meson...,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
On 20/06/2023 09:36, Krzysztof Kozlowski wrote:
> On 20/06/2023 09:33, Neil Armstrong wrote:
>> Hi,
>>
>> On 12/03/2023 22:29, Heiner Kallweit wrote:
>>> Convert Amlogic Meson GPIO interrupt controller binding to yaml.
>>>
>>> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>> ---
>>> - consider that more than one compatible may be set
>>> - remove bus part from example
>>> - remove minItem/maxItem properties for compatible
>>> - reduce compatible fallback complexity
>>> - add that 8 or 12 GIC interrupts can be used
>>> - fix typo
>>> ---
>>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>>> 2 files changed, 72 insertions(+), 38 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
>> Gentle ping, this patch is fully reviewed and is lying on the list for the last 3 months.
>
> Maybe just take it through your Amlogic SoC tree in such case? It's less
> preferred than subsystem, but still what matters is to get this merged.
Yep I'll send it via the amlogic tree this week if Marc or Thomas doesn't object,
Neil
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
2023-03-12 21:29 [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-03-30 5:53 ` Heiner Kallweit
2023-06-20 7:33 ` Neil Armstrong
@ 2023-06-22 7:57 ` Neil Armstrong
2 siblings, 0 replies; 7+ messages in thread
From: Neil Armstrong @ 2023-06-22 7:57 UTC (permalink / raw
To: Rob Herring, Krzysztof Kozlowski, Thomas Gleixner, Jerome Brunet,
Martin Blumenstingl, Kevin Hilman, Marc Zyngier, Heiner Kallweit
Cc: open list:ARM/Amlogic Meson..., linux-arm-kernel, devicetree
Hi,
On Sun, 12 Mar 2023 22:29:07 +0100, Heiner Kallweit wrote:
> Convert Amlogic Meson GPIO interrupt controller binding to yaml.
>
>
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.5/drivers)
[1/1] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
https://git.kernel.org/amlogic/c/6b0139b372d40bd5dafc140b6618b57d13211168
These changes has been applied on the intermediate git tree [1].
The v6.5/drivers branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-06-22 7:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-03-12 21:29 [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-03-30 5:53 ` Heiner Kallweit
2023-06-20 7:33 ` Neil Armstrong
2023-06-20 7:36 ` Krzysztof Kozlowski
2023-06-20 7:41 ` neil.armstrong
2023-06-22 7:57 ` Neil Armstrong
-- strict thread matches above, loose matches on Subject: below --
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-27 21:14 ` [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).