From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
Arnd Bergmann <arnd@kernel.org>,
Heiko Carstens <hca@linux.ibm.com>,
linux-kernel@vger.kernel.org,
Niklas Schnelle <schnelle@linux.ibm.com>
Subject: [PATCH 1/1] video: Handle HAS_IOPORT dependencies
Date: Wed, 10 Apr 2024 16:23:29 +0200 [thread overview]
Message-ID: <20240410142329.3567824-2-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20240410142329.3567824-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to #ifdef functions and their callsites which
unconditionally use these I/O accessors. In the include/video/vga.h
these are conveniently all those functions with the vga_io_* prefix.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes
and may be merged via subsystem specific trees at your earliest
convenience.
include/video/vga.h | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/include/video/vga.h b/include/video/vga.h
index 947c0abd04ef..ed89295941c4 100644
--- a/include/video/vga.h
+++ b/include/video/vga.h
@@ -201,6 +201,7 @@ extern int restore_vga(struct vgastate *state);
* generic VGA port read/write
*/
+#ifdef CONFIG_HAS_IOPORT
static inline unsigned char vga_io_r (unsigned short port)
{
return inb_p(port);
@@ -210,12 +211,12 @@ static inline void vga_io_w (unsigned short port, unsigned char val)
{
outb_p(val, port);
}
-
static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
unsigned char val)
{
outw(VGA_OUT16VAL (val, reg), port);
}
+#endif /* CONFIG_HAS_IOPORT */
static inline unsigned char vga_mm_r (void __iomem *regbase, unsigned short port)
{
@@ -235,28 +236,34 @@ static inline void vga_mm_w_fast (void __iomem *regbase, unsigned short port,
static inline unsigned char vga_r (void __iomem *regbase, unsigned short port)
{
- if (regbase)
- return vga_mm_r (regbase, port);
- else
+#ifdef CONFIG_HAS_IOPORT
+ if (!regbase)
return vga_io_r (port);
+ else
+#endif /* CONFIG_HAS_IOPORT */
+ return vga_mm_r (regbase, port);
}
static inline void vga_w (void __iomem *regbase, unsigned short port, unsigned char val)
{
- if (regbase)
- vga_mm_w (regbase, port, val);
- else
+#ifdef CONFIG_HAS_IOPORT
+ if (!regbase)
vga_io_w (port, val);
+ else
+#endif /* CONFIG_HAS_IOPORT */
+ vga_mm_w (regbase, port, val);
}
static inline void vga_w_fast (void __iomem *regbase, unsigned short port,
unsigned char reg, unsigned char val)
{
- if (regbase)
- vga_mm_w_fast (regbase, port, reg, val);
- else
+#ifdef CONFIG_HAS_IOPORT
+ if (!regbase)
vga_io_w_fast (port, reg, val);
+ else
+#endif /* CONFIG_HAS_IOPORT */
+ vga_mm_w_fast (regbase, port, reg, val);
}
@@ -280,6 +287,7 @@ static inline void vga_wcrt (void __iomem *regbase, unsigned char reg, unsigned
#endif /* VGA_OUTW_WRITE */
}
+#ifdef CONFIG_HAS_IOPORT
static inline unsigned char vga_io_rcrt (unsigned char reg)
{
vga_io_w (VGA_CRT_IC, reg);
@@ -295,6 +303,7 @@ static inline void vga_io_wcrt (unsigned char reg, unsigned char val)
vga_io_w (VGA_CRT_DC, val);
#endif /* VGA_OUTW_WRITE */
}
+#endif /* CONFIG_HAS_IOPORT */
static inline unsigned char vga_mm_rcrt (void __iomem *regbase, unsigned char reg)
{
@@ -333,6 +342,7 @@ static inline void vga_wseq (void __iomem *regbase, unsigned char reg, unsigned
#endif /* VGA_OUTW_WRITE */
}
+#ifdef CONFIG_HAS_IOPORT
static inline unsigned char vga_io_rseq (unsigned char reg)
{
vga_io_w (VGA_SEQ_I, reg);
@@ -348,6 +358,7 @@ static inline void vga_io_wseq (unsigned char reg, unsigned char val)
vga_io_w (VGA_SEQ_D, val);
#endif /* VGA_OUTW_WRITE */
}
+#endif /* CONFIG_HAS_IOPORT */
static inline unsigned char vga_mm_rseq (void __iomem *regbase, unsigned char reg)
{
@@ -385,6 +396,7 @@ static inline void vga_wgfx (void __iomem *regbase, unsigned char reg, unsigned
#endif /* VGA_OUTW_WRITE */
}
+#ifdef CONFIG_HAS_IOPORT
static inline unsigned char vga_io_rgfx (unsigned char reg)
{
vga_io_w (VGA_GFX_I, reg);
@@ -400,6 +412,7 @@ static inline void vga_io_wgfx (unsigned char reg, unsigned char val)
vga_io_w (VGA_GFX_D, val);
#endif /* VGA_OUTW_WRITE */
}
+#endif /* CONFIG_HAS_IOPORT */
static inline unsigned char vga_mm_rgfx (void __iomem *regbase, unsigned char reg)
{
@@ -434,6 +447,7 @@ static inline void vga_wattr (void __iomem *regbase, unsigned char reg, unsigned
vga_w (regbase, VGA_ATT_W, val);
}
+#ifdef CONFIG_HAS_IOPORT
static inline unsigned char vga_io_rattr (unsigned char reg)
{
vga_io_w (VGA_ATT_IW, reg);
@@ -445,6 +459,7 @@ static inline void vga_io_wattr (unsigned char reg, unsigned char val)
vga_io_w (VGA_ATT_IW, reg);
vga_io_w (VGA_ATT_W, val);
}
+#endif /* CONFIG_HAS_IOPORT */
static inline unsigned char vga_mm_rattr (void __iomem *regbase, unsigned char reg)
{
--
2.40.1
next prev parent reply other threads:[~2024-04-10 14:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-10 14:23 [PATCH 0/1] video: Handle HAS_IOPORT dependencies Niklas Schnelle
2024-04-10 14:23 ` Niklas Schnelle [this message]
2024-04-11 14:00 ` [PATCH 1/1] " Helge Deller
2024-04-22 8:34 ` Niklas Schnelle
2024-04-22 19:28 ` Arnd Bergmann
2024-04-24 19:29 ` Helge Deller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240410142329.3567824-2-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=arnd@kernel.org \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=hca@linux.ibm.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).