From: Alex Bee <knaerzche@gmail.com>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Linus Walleij <linus.walleij@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Chris Zhong <zyw@rock-chips.com>,
Zhang Qing <zhangqing@rock-chips.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, Alex Bee <knaerzche@gmail.com>
Subject: [PATCH v4 0/5] Add RK816 PMIC support
Date: Tue, 16 Apr 2024 18:12:32 +0200 [thread overview]
Message-ID: <20240416161237.2500037-1-knaerzche@gmail.com> (raw)
This series aims to add support for Rockchip RK816 PMIC series. As per
datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
integrated fuel gauge. Charger and fuel gauge are not part of this series.
Two of the switches (otg/boost) are part of the binding, but not of
the driver. They must only ever be enabled if no battery charging is
happening, but it will be enabled automatically if a battery is attached
and an external power source is connected. Thus that needs some
incorporation of a yet to be added charger driver.
Integration in the existing rk8xx-infrastructure was pretty straightforward
and only needed very little tweaking. In order to not further bloat the
driver(s) too much with additional `#define`s I tried to re-use existing
ones wherever possible.
The patches are loosely based on the vendor's implementation, verified
against the datasheet and tested/measured on a RK3126 board.
I'd like to gently ping pinctrl and regulator maintainers: please have a
look at this series. I've now added Sebastian Reichel to the recipients, as
he recently added RK806 support and re-worked parts of the rk8xx drivers.
changes since v1:
- integrated Krzysztof's feedback for the bindings and the resulting
driver changes
- fixed a sparse warning
link to v1:
https://lore.kernel.org/lkml/20240321143911.90210-2-knaerzche@gmail.com/
changes since v2:
- integrated Krzysztof's feedback to v2 of the bindings and the resulting
driver changes
link to v2:
https://lore.kernel.org/lkml/20240323085852.116756-1-knaerzche@gmail.com/
changes since v3:
- integrated Krzysztof's feedback to the bindings of v3
- integrated Lee's feedback to the mfd part of v3
link to v3:
https://lore.kernel.org/lkml/20240323132757.141861-2-knaerzche@gmail.com/
Please see individual patches for details about the changes.
Alex Bee (5):
dt-bindings: mfd: Add rk816 binding
mfd: rk8xx: Add RK816 support
pinctrl: rk805: Add rk816 pinctrl support
regulator: rk808: Support apply_bit for
rk808_set_suspend_voltage_range
regulator: rk808: Add RK816 support
.../bindings/mfd/rockchip,rk816.yaml | 274 ++++++++++++++++++
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk8xx-core.c | 104 +++++++
drivers/mfd/rk8xx-i2c.c | 45 ++-
drivers/pinctrl/pinctrl-rk805.c | 69 +++++
drivers/regulator/rk808-regulator.c | 218 +++++++++++++-
include/linux/mfd/rk808.h | 144 +++++++++
7 files changed, 851 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml
--
2.43.2
next reply other threads:[~2024-04-16 16:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-16 16:12 Alex Bee [this message]
2024-04-16 16:12 ` [PATCH v4 1/5] dt-bindings: mfd: Add rk816 binding Alex Bee
2024-04-16 16:12 ` [PATCH v4 2/5] mfd: rk8xx: Add RK816 support Alex Bee
2024-04-16 16:12 ` [PATCH v4 3/5] pinctrl: rk805: Add rk816 pinctrl support Alex Bee
2024-04-17 8:57 ` Linus Walleij
2024-04-18 17:48 ` Alex Bee
2024-04-19 13:31 ` Linus Walleij
2024-04-16 16:12 ` [PATCH v4 4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range Alex Bee
2024-04-23 5:21 ` Mark Brown
2024-04-16 16:12 ` [PATCH v4 5/5] regulator: rk808: Add RK816 support Alex Bee
2024-04-23 5:21 ` Mark Brown
2024-05-03 8:01 ` [PATCH v4 0/5] Add RK816 PMIC support Alex Bee
2024-05-03 8:11 ` Lee Jones
2024-05-03 8:17 ` Lee Jones
2024-05-03 8:18 ` Lee Jones
2024-05-03 8:29 ` Alex Bee
2024-05-10 14:47 ` [GIT PULL] Immutable branch between MFD, Pinctrl and Regulator due for the v6.10 merge window Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240416161237.2500037-1-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=zhangqing@rock-chips.com \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).