From: Doug Berger <opendmb@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Florian Fainelli <florian.fainelli@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Doug Berger <opendmb@gmail.com>,
Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH v2] gpio: brcmstb: Use dynamic GPIO base numbers
Date: Tue, 23 Apr 2024 11:46:05 -0700 [thread overview]
Message-ID: <20240423184605.2094376-1-opendmb@gmail.com> (raw)
Forcing a gpiochip to have a fixed base number now leads to a warning
message. Remove the need to do so by using the offset value of the
gpiochip.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
---
change in v2:
gc->base is already initialized to -1 by bgpio_init() so the
redundant initialization in this driver was removed.
drivers/gpio/gpio-brcmstb.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index a789af4a5c85..790cb278b72a 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -50,7 +50,6 @@ struct brcmstb_gpio_priv {
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
int parent_irq;
- int gpio_base;
int num_gpios;
int parent_wake_irq;
};
@@ -92,7 +91,7 @@ brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
struct brcmstb_gpio_bank *bank)
{
- return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
+ return hwirq - bank->gc.offset;
}
static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
@@ -118,7 +117,7 @@ static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
/* gc_offset is relative to this gpio_chip; want real offset */
- int hwirq = offset + (gc->base - priv->gpio_base);
+ int hwirq = offset + gc->offset;
if (hwirq >= priv->num_gpios)
return -ENXIO;
@@ -263,7 +262,7 @@ static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
{
struct brcmstb_gpio_priv *priv = bank->parent_priv;
struct irq_domain *domain = priv->irq_domain;
- int hwbase = bank->gc.base - priv->gpio_base;
+ int hwbase = bank->gc.offset;
unsigned long status;
while ((status = brcmstb_gpio_get_active_irqs(bank))) {
@@ -412,7 +411,7 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
- offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+ offset = gpiospec->args[0] - bank->gc.offset;
if (offset >= gc->ngpio || offset < 0)
return -EINVAL;
@@ -596,8 +595,8 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
const __be32 *p;
u32 bank_width;
int num_banks = 0;
+ int num_gpios = 0;
int err;
- static int gpio_base;
unsigned long flags = 0;
bool need_wakeup_event = false;
@@ -611,7 +610,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
if (IS_ERR(reg_base))
return PTR_ERR(reg_base);
- priv->gpio_base = gpio_base;
priv->reg_base = reg_base;
priv->pdev = pdev;
@@ -651,7 +649,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
dev_dbg(dev, "Width 0 found: Empty bank @ %d\n",
num_banks);
num_banks++;
- gpio_base += MAX_GPIO_PER_BANK;
+ num_gpios += MAX_GPIO_PER_BANK;
continue;
}
@@ -691,7 +689,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
err = -ENOMEM;
goto fail;
}
- gc->base = gpio_base;
gc->of_gpio_n_cells = 2;
gc->of_xlate = brcmstb_gpio_of_xlate;
/* not all ngpio lines are valid, will use bank width later */
@@ -713,7 +710,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
bank->id);
goto fail;
}
- gpio_base += gc->ngpio;
+ num_gpios += gc->ngpio;
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
gc->base, gc->ngpio, bank->width);
@@ -724,7 +721,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
num_banks++;
}
- priv->num_gpios = gpio_base - priv->gpio_base;
+ priv->num_gpios = num_gpios;
if (priv->parent_irq > 0) {
err = brcmstb_gpio_irq_setup(pdev, priv);
if (err)
--
2.34.1
next reply other threads:[~2024-04-23 18:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-23 18:46 Doug Berger [this message]
2024-04-23 18:54 ` [PATCH v2] gpio: brcmstb: Use dynamic GPIO base numbers Florian Fainelli
2024-04-23 20:22 ` Linus Walleij
2024-04-24 8:32 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240423184605.2094376-1-opendmb@gmail.com \
--to=opendmb@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=brgl@bgdev.pl \
--cc=florian.fainelli@broadcom.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phil@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).