From: Javier Carrasco <javier.carrasco.cruz@gmail.com>
To: Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, peiyu li <579lpy@gmail.com>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Javier Carrasco <javier.carrasco.cruz@gmail.com>
Subject: [PATCH 2/2] dt-bindings: hwmon: max6650: convert to dtschema
Date: Wed, 20 Mar 2024 18:04:58 +0100 [thread overview]
Message-ID: <20240320-hwmon_yaml-v1-2-a349ca21ccab@gmail.com> (raw)
In-Reply-To: <20240320-hwmon_yaml-v1-0-a349ca21ccab@gmail.com>
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
.../devicetree/bindings/hwmon/max6650.txt | 28 ---------
.../devicetree/bindings/hwmon/maxim,max6650.yaml | 68 ++++++++++++++++++++++
2 files changed, 68 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d8e284..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
- 12000000 uV.
-- maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values
- allow more fine-grained control of slower fans.
- Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
- driver selects closed-loop mode and the requested speed.
- This ensures the fan is already running before userspace
- takes over.
-
-Example:
- fan-max6650: max6650@1b {
- reg = <0x1b>;
- compatible = "maxim,max6650";
- maxim,fan-microvolt = <12000000>;
- maxim,fan-prescale = <4>;
- maxim,fan-target-rpm = <1200>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 000000000000..1b33b5fb606d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+ - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+ The MAX6650 and MAX6651 regulate and monitor the speed
+ of 5VDC/12VDC burshless fans with built-in tachometers.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max6650
+ - maxim,max6651
+
+ reg:
+ maxItems: 1
+
+ maxim,fan-microvolt:
+ description:
+ The supply voltage of the fan, either 5000000 uV or
+ 12000000 uV.
+
+ maxim,fan-prescale:
+ description:
+ Pre-scaling value, as per datasheet. Lower values
+ allow more fine-grained control of slower fans.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4, 8, 16]
+
+ maxim,fan-target-rpm:
+ description:
+ Initial requested fan rotation speed. If specified, the
+ driver selects closed-loop mode and the requested speed.
+ This ensures the fan is already running before userspace
+ takes over.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan-controller@1b {
+ compatible = "maxim,max6650";
+ reg = <0x1b>;
+ maxim,fan-microvolt = <12000000>;
+ maxim,fan-prescale = <4>;
+ maxim,fan-target-rpm = <1200>;
+ };
+ };
--
2.40.1
next prev parent reply other threads:[~2024-03-20 17:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-20 17:04 [PATCH 0/2] dt-bindings: hwmon: convert lm87 and max6650 to dtschema Javier Carrasco
2024-03-20 17:04 ` [PATCH 1/2] dt-bindings: hwmon: lm87: convert " Javier Carrasco
2024-03-20 17:11 ` Conor Dooley
2024-03-20 18:03 ` Guenter Roeck
2024-03-20 17:04 ` Javier Carrasco [this message]
2024-03-21 14:03 ` [PATCH 2/2] dt-bindings: hwmon: max6650: " Rob Herring
2024-03-21 14:17 ` Guenter Roeck
2024-03-21 14:18 ` Javier Carrasco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240320-hwmon_yaml-v1-2-a349ca21ccab@gmail.com \
--to=javier.carrasco.cruz@gmail.com \
--cc=579lpy@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).