From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ondrej Zary <linux@zary.sk>, Sergey Shtylyov <s.shtylyov@omp.ru>,
Damien Le Moal <dlemoal@kernel.org>,
Sasha Levin <sashal@kernel.org>,
martin.petersen@oracle.com, gregkh@linuxfoundation.org,
bvanassche@acm.org, linux-ide@vger.kernel.org
Subject: [PATCH AUTOSEL 6.5 24/31] ata: pata_parport: add custom version of wait_after_reset
Date: Wed, 18 Oct 2023 10:11:41 -0400 [thread overview]
Message-ID: <20231018141151.1334501-24-sashal@kernel.org> (raw)
In-Reply-To: <20231018141151.1334501-1-sashal@kernel.org>
From: Ondrej Zary <linux@zary.sk>
[ Upstream commit f343e578fef99a69b3322aca38b94a6d8ded2ce7 ]
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/pata_parport/pata_parport.c | 68 ++++++++++++++++++++++++-
1 file changed, 67 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_parport/pata_parport.c b/drivers/ata/pata_parport/pata_parport.c
index 1af64d435d3c2..cd5463970be2e 100644
--- a/drivers/ata/pata_parport/pata_parport.c
+++ b/drivers/ata/pata_parport/pata_parport.c
@@ -73,6 +73,72 @@ static bool pata_parport_devchk(struct ata_port *ap, unsigned int device)
return (nsect == 0x55) && (lbal == 0xaa);
}
+static int pata_parport_wait_after_reset(struct ata_link *link,
+ unsigned int devmask,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pi_adapter *pi = ap->host->private_data;
+ unsigned int dev0 = devmask & (1 << 0);
+ unsigned int dev1 = devmask & (1 << 1);
+ int rc, ret = 0;
+
+ ata_msleep(ap, ATA_WAIT_AFTER_RESET);
+
+ /* always check readiness of the master device */
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ /*
+ * some adapters return bogus values if master device is not
+ * present, so don't abort now if a slave device is present
+ */
+ if (!dev1)
+ return rc;
+ ret = -ENODEV;
+ }
+
+ /*
+ * if device 1 was found in ata_devchk, wait for register
+ * access briefly, then wait for BSY to clear.
+ */
+ if (dev1) {
+ int i;
+
+ pata_parport_dev_select(ap, 1);
+
+ /*
+ * Wait for register access. Some ATAPI devices fail
+ * to set nsect/lbal after reset, so don't waste too
+ * much time on it. We're gonna wait for !BSY anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ u8 nsect, lbal;
+
+ nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT);
+ lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL);
+ if (nsect == 1 && lbal == 1)
+ break;
+ /* give drive a breather */
+ ata_msleep(ap, 50);
+ }
+
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ if (rc != -ENODEV)
+ return rc;
+ ret = rc;
+ }
+ }
+
+ pata_parport_dev_select(ap, 0);
+ if (dev1)
+ pata_parport_dev_select(ap, 1);
+ if (dev0)
+ pata_parport_dev_select(ap, 0);
+
+ return ret;
+}
+
static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
@@ -87,7 +153,7 @@ static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask,
ap->last_ctl = ap->ctl;
/* wait the port to become ready */
- return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
+ return pata_parport_wait_after_reset(&ap->link, devmask, deadline);
}
static int pata_parport_softreset(struct ata_link *link, unsigned int *classes,
--
2.40.1
next parent reply other threads:[~2023-10-18 14:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20231018141151.1334501-1-sashal@kernel.org>
2023-10-18 14:11 ` Sasha Levin [this message]
2023-10-18 14:11 ` [PATCH AUTOSEL 6.5 25/31] ata: pata_parport: fit3: implement IDE command set registers Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018141151.1334501-24-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=bvanassche@acm.org \
--cc=dlemoal@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@zary.sk \
--cc=martin.petersen@oracle.com \
--cc=s.shtylyov@omp.ru \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).