From: Luca Weiss <luca@z3ntu.xyz>
To: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Luca Weiss <luca@z3ntu.xyz>
Subject: [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list
Date: Mon, 08 Apr 2024 18:34:33 +0200 [thread overview]
Message-ID: <20240408-mpu6050-i2c-gate-v1-1-621f051ce7de@z3ntu.xyz> (raw)
Before all supported sensors except for MPU{9150,9250,9255} were not
allowed to use i2c-gate in the bindings which excluded quite a few
supported sensors where this functionality is supported.
Switch the list of sensors to ones where the Linux driver explicitly
disallows support for the auxiliary bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
This fixes dt validation error on qcom-msm8974-lge-nexus5-hammerhead
which uses mpu6515
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dtb: mpu6515@68: i2c-gate: False schema does not allow {'#address-cells': [[1]], '#size-cells': [[0]], 'ak8963@f': {'compatible': ['asahi-kasei,ak8963'], 'reg': [[15]], 'gpios': [[40, 67, 0]], 'vid-supply': [[50]], 'vdd-supply': [[49]]}, 'bmp280@76': {'compatible': ['bosch,bmp280'], 'reg': [[118]], 'vdda-supply': [[50]], 'vddd-supply': [[49]]}}
from schema $id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml#
---
.../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 297b8a1a7ffb..587ff2bced2d 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -62,14 +62,15 @@ properties:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
- not:
- properties:
- compatible:
- contains:
- enum:
- - invensense,mpu9150
- - invensense,mpu9250
- - invensense,mpu9255
+ properties:
+ compatible:
+ contains:
+ enum:
+ - invensense,iam20680
+ - invensense,icm20602
+ - invensense,icm20608
+ - invensense,icm20609
+ - invensense,icm20689
then:
properties:
i2c-gate: false
---
base-commit: 8568bb2ccc278f344e6ac44af6ed010a90aa88dc
change-id: 20240408-mpu6050-i2c-gate-4ea473e492f4
Best regards,
--
Luca Weiss <luca@z3ntu.xyz>
next reply other threads:[~2024-04-08 16:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-08 16:34 Luca Weiss [this message]
2024-04-08 19:49 ` [PATCH] dt-bindings: iio: imu: mpu6050: Improve i2c-gate disallow list Jean-Baptiste Maneyrol
2024-04-09 6:36 ` Krzysztof Kozlowski
2024-04-13 11:01 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240408-mpu6050-i2c-gate-v1-1-621f051ce7de@z3ntu.xyz \
--to=luca@z3ntu.xyz \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).