From: Vasileios Amoiridis <vassilisamir@gmail.com>
To: jic23@kernel.org
Cc: lars@metafoo.de, andriy.shevchenko@linux.intel.com,
ang.iglesiasg@gmail.com, mazziesaccount@gmail.com,
ak@it-klinger.de, petre.rodan@subdimension.ro,
phil@raspberrypi.com, 579lpy@gmail.com, linus.walleij@linaro.org,
semen.protsenko@linaro.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vasileios Amoiridis <vassilisamir@gmail.com>
Subject: [PATCH v6 2/9] iio: pressure: bmp280: Remove, add and update error messages
Date: Wed, 8 May 2024 18:52:00 +0200 [thread overview]
Message-ID: <20240508165207.145554-3-vassilisamir@gmail.com> (raw)
In-Reply-To: <20240508165207.145554-1-vassilisamir@gmail.com>
Remove duplicate error messages, add missing error messages and
update redundant ones.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
drivers/iio/pressure/bmp280-core.c | 55 +++++++++++++++++++++---------
1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 311a011604da..0aa16fb135c1 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -222,10 +222,8 @@ static int bme280_read_calib(struct bmp280_data *data)
/* Load shared calibration params with bmp280 first */
ret = bmp280_read_calib(data);
- if (ret < 0) {
- dev_err(dev, "failed to read calibration parameters\n");
+ if (ret < 0)
return ret;
- }
/*
* Read humidity calibration values.
@@ -841,8 +839,10 @@ static int bme280_chip_config(struct bmp280_data *data)
*/
ret = regmap_update_bits(data->regmap, BME280_REG_CTRL_HUMIDITY,
BME280_OSRS_HUMIDITY_MASK, osrs);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to set humidity oversampling");
return ret;
+ }
return bmp280_chip_config(data);
}
@@ -1071,7 +1071,7 @@ static int bmp380_read_calib(struct bmp280_data *data)
sizeof(data->bmp380_cal_buf));
if (ret) {
dev_err(data->dev,
- "failed to read temperature calibration parameters\n");
+ "failed to read calibration parameters\n");
return ret;
}
@@ -1609,20 +1609,24 @@ static int bmp580_preinit(struct bmp280_data *data)
/* Post powerup sequence */
ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®);
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to establish comms with the chip\n");
return ret;
+ }
/* Print warn message if we don't know the chip id */
if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT)
- dev_warn(data->dev, "preinit: unexpected chip_id\n");
+ dev_warn(data->dev, "unexpected chip_id\n");
ret = regmap_read(data->regmap, BMP580_REG_STATUS, ®);
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to read nvm status\n");
return ret;
+ }
/* Check nvm status */
if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) {
- dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
+ dev_err(data->dev, "nvm error on powerup sequence\n");
return -EIO;
}
@@ -1657,6 +1661,10 @@ static int bmp580_chip_config(struct bmp280_data *data)
BMP580_DSP_COMP_MASK |
BMP580_DSP_SHDW_IIR_TEMP_EN |
BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val);
+ if (ret) {
+ dev_err(data->dev, "failed to change DSP mode settings\n");
+ return ret;
+ }
/* Configure oversampling */
reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) |
@@ -1778,8 +1786,10 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
reinit_completion(&data->done);
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to write crtl_meas register\n");
return ret;
+ }
if (data->use_eoc) {
/*
@@ -1802,12 +1812,16 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
}
ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to read ctrl_meas register\n");
return ret;
+ }
/* The value of this bit reset to "0" after conversion is complete */
- if (ctrl & BMP180_MEAS_SCO)
+ if (ctrl & BMP180_MEAS_SCO) {
+ dev_err(data->dev, "conversion didn't complete\n");
return -EIO;
+ }
return 0;
}
@@ -1824,8 +1838,10 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
&data->be16, sizeof(data->be16));
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to read temperature\n");
return ret;
+ }
*val = be16_to_cpu(data->be16);
@@ -1840,9 +1856,10 @@ static int bmp180_read_calib(struct bmp280_data *data)
ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
-
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read calibration parameters\n");
return ret;
+ }
/* None of the words has the value 0 or 0xFFFF */
for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
@@ -1925,8 +1942,10 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
data->buf, sizeof(data->buf));
- if (ret)
+ if (ret) {
+ dev_err(data->dev, "failed to read pressure\n");
return ret;
+ }
*val = get_unaligned_be24(data->buf) >> (8 - oss);
@@ -2158,8 +2177,10 @@ int bmp280_common_probe(struct device *dev,
data->regmap = regmap;
ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(data->dev, "failed to read chip id\n");
return ret;
+ }
for (i = 0; i < data->chip_info->num_chip_id; i++) {
if (chip_id == data->chip_info->chip_id[i]) {
--
2.25.1
next prev parent reply other threads:[~2024-05-08 16:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-08 16:51 [PATCH v6 0/9] iio: pressure: bmp280: Add triggered buffer support and Vasileios Amoiridis
2024-05-08 16:51 ` [PATCH v6 1/9] iio: pressure: bmp280: Remove dead error checks Vasileios Amoiridis
2024-05-12 12:07 ` Jonathan Cameron
2024-05-08 16:52 ` Vasileios Amoiridis [this message]
2024-05-12 12:09 ` [PATCH v6 2/9] iio: pressure: bmp280: Remove, add and update error messages Jonathan Cameron
2024-05-08 16:52 ` [PATCH v6 3/9] iio: pressure: bmp280: Make error checks consistent Vasileios Amoiridis
2024-05-12 12:11 ` Jonathan Cameron
2024-05-08 16:52 ` [PATCH v6 4/9] iio: pressure: bmp280: Use unsigned data types for raw sensor data Vasileios Amoiridis
2024-05-12 12:13 ` Jonathan Cameron
2024-05-08 16:52 ` [PATCH v6 5/9] iio: pressure: bmp280: Refactorize reading functions Vasileios Amoiridis
2024-05-12 12:24 ` Jonathan Cameron
2024-05-12 18:42 ` Vasileios Amoiridis
2024-05-08 16:52 ` [PATCH v6 6/9] iio: pressure: bmp280: Introduce new cleanup routines Vasileios Amoiridis
2024-05-08 16:52 ` [PATCH v6 7/9] iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions Vasileios Amoiridis
2024-05-08 16:52 ` [PATCH v6 8/9] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them Vasileios Amoiridis
2024-05-12 12:29 ` Jonathan Cameron
2024-05-12 18:48 ` Vasileios Amoiridis
2024-05-08 16:52 ` [PATCH v6 9/9] iio: pressure: bmp280: Add triggered buffer support Vasileios Amoiridis
2024-05-12 12:34 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240508165207.145554-3-vassilisamir@gmail.com \
--to=vassilisamir@gmail.com \
--cc=579lpy@gmail.com \
--cc=ak@it-klinger.de \
--cc=andriy.shevchenko@linux.intel.com \
--cc=ang.iglesiasg@gmail.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mazziesaccount@gmail.com \
--cc=petre.rodan@subdimension.ro \
--cc=phil@raspberrypi.com \
--cc=semen.protsenko@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).