From: kernel test robot <lkp@intel.com>
To: Christian Marangi <ansuelsmth@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: oe-kbuild-all@lists.linux.dev, Christian Marangi <ansuelsmth@gmail.com>
Subject: Re: [PATCH 3/3] leds: leds-lp5569: Add support for Texas Instruments LP5569
Date: Fri, 17 May 2024 02:20:38 +0800 [thread overview]
Message-ID: <202405170244.MEWiW9it-lkp@intel.com> (raw)
In-Reply-To: <20240515143129.31557-3-ansuelsmth@gmail.com>
Hi Christian,
kernel test robot noticed the following build errors:
[auto build test ERROR on lee-leds/for-leds-next]
[also build test ERROR on robh/for-next linus/master v6.9 next-20240516]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Christian-Marangi/dt-bindings-leds-lp55xx-Add-new-ti-lp5569-compatible/20240515-223434
base: https://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git for-leds-next
patch link: https://lore.kernel.org/r/20240515143129.31557-3-ansuelsmth%40gmail.com
patch subject: [PATCH 3/3] leds: leds-lp5569: Add support for Texas Instruments LP5569
config: alpha-allyesconfig (https://download.01.org/0day-ci/archive/20240517/202405170244.MEWiW9it-lkp@intel.com/config)
compiler: alpha-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240517/202405170244.MEWiW9it-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202405170244.MEWiW9it-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/leds/leds-lp5569.c: In function 'lp5569_post_init_device':
>> drivers/leds/leds-lp5569.c:169:16: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
169 | val |= FIELD_PREP(LP5569_CP_MODE_MASK, chip->pdata->charge_pump_mode);
| ^~~~~~~~~~
drivers/leds/leds-lp5569.c: In function 'lp5569_load_engine':
>> drivers/leds/leds-lp5569.c:41:41: error: implicit declaration of function 'FIELD_PREP_CONST' [-Werror=implicit-function-declaration]
41 | #define LP5569_MODE_LOAD_ENG FIELD_PREP_CONST(LP5569_MODE_ENG_MASK, 0x1)
| ^~~~~~~~~~~~~~~~
drivers/leds/leds-lp5569.c:195:15: note: in expansion of macro 'LP5569_MODE_LOAD_ENG'
195 | val = LP5569_MODE_LOAD_ENG << LP5569_MODE_ENGn_SHIFT(idx);
| ^~~~~~~~~~~~~~~~~~~~
drivers/leds/leds-lp5569.c: In function 'lp5569_init_program_engine':
>> drivers/leds/leds-lp5569.c:321:18: error: implicit declaration of function 'FIELD_GET' [-Werror=implicit-function-declaration]
321 | status = FIELD_GET(LP5569_ENG_STATUS_MASK, status);
| ^~~~~~~~~
drivers/leds/leds-lp5569.c: In function 'show_master_fader_leds':
>> drivers/leds/leds-lp5569.c:904:27: error: implicit declaration of function 'FIELD_MAX'; did you mean 'IPL_MAX'? [-Werror=implicit-function-declaration]
904 | if (val > FIELD_MAX(LP5569_FADER_MAPPING_MASK)) {
| ^~~~~~~~~
| IPL_MAX
cc1: some warnings being treated as errors
vim +/FIELD_PREP +169 drivers/leds/leds-lp5569.c
29
30 #define LP5569_REG_EXEC_CTRL 0x01
31 /*
32 * Program Memory Operations
33 * Same Mask for each engine for both mode and exec
34 * ENG1 GENMASK(3, 2)
35 * ENG2 GENMASK(5, 4)
36 * ENG3 GENMASK(7, 6)
37 */
38 #define LP5569_MODE_ENG_MASK GENMASK(1, 0)
39 #define LP5569_MODE_ENG_SHIFT 2
40 #define LP5569_MODE_DISABLE_ENG FIELD_PREP_CONST(LP5569_MODE_ENG_MASK, 0x0)
> 41 #define LP5569_MODE_LOAD_ENG FIELD_PREP_CONST(LP5569_MODE_ENG_MASK, 0x1)
42 #define LP5569_MODE_RUN_ENG FIELD_PREP_CONST(LP5569_MODE_ENG_MASK, 0x2)
43 #define LP5569_MODE_HALT_ENG FIELD_PREP_CONST(LP5569_MODE_ENG_MASK, 0x3)
44
45 #define LP5569_MODE_ENGn_SHIFT(n) (LP5569_MODE_ENG_SHIFT + (2 * (3 - (n))))
46 #define LP5569_MODE_ENGn_MASK(n) (LP5569_MODE_ENG_MASK << LP5569_MODE_ENGn_SHIFT(n))
47 #define LP5569_MODE_ENGn_GET(n, mode) \
48 (((mode) >> LP5569_MODE_ENGn_SHIFT(n)) & LP5569_MODE_ENG_MASK)
49
50 #define LP5569_REG_OP_MODE 0x02
51 #define LP5569_EXEC_ENG_MASK GENMASK(1, 0)
52 #define LP5569_EXEC_ENG_SHIFT 2
53 #define LP5569_EXEC_HOLD_ENG FIELD_PREP_CONST(LP5569_EXEC_ENG_MASK, 0x0)
54 #define LP5569_EXEC_STEP_ENG FIELD_PREP_CONST(LP5569_EXEC_ENG_MASK, 0x1)
55 #define LP5569_EXEC_RUN_ENG FIELD_PREP_CONST(LP5569_EXEC_ENG_MASK, 0x2)
56 #define LP5569_EXEC_ONCE_ENG FIELD_PREP_CONST(LP5569_EXEC_ENG_MASK, 0x3)
57
58 #define LP5569_EXEC_ENGn_SHIFT(n) (LP5569_EXEC_ENG_SHIFT + (2 * (3 - (n))))
59 #define LP5569_EXEC_ENGn_MASK(n) (LP5569_EXEC_ENG_MASK << LP5569_EXEC_ENGn_SHIFT(n))
60
61 #define LP5569_REG_ENABLE_LEDS_MSB 0x04
62 #define LP5569_REG_ENABLE_LEDS_LSB 0x05
63 #define LP5569_REG_LED_CTRL_BASE 0x07
64 #define LP5569_FADER_MAPPING_MASK GENMASK(7, 5)
65 #define LP5569_REG_LED_PWM_BASE 0x16
66 #define LP5569_REG_LED_CURRENT_BASE 0x22
67 #define LP5569_REG_MISC 0x2F
68 #define LP5569_AUTO_INC BIT(6)
69 #define LP5569_PWR_SAVE BIT(5)
70 #define LP5569_CP_MODE_MASK GENMASK(4, 3)
71 #define LP5569_PWM_PWR_SAVE BIT(2)
72 #define LP5569_INTERNAL_CLK BIT(0)
73 #define LP5569_REG_MISC2 0x33
74 #define LP5569_LED_SHORT_TEST BIT(4)
75 #define LP5569_LED_OPEN_TEST BIT(3)
76 #define LP5569_REG_STATUS 0x3C
77 #define LP5569_MASK_BUSY BIT(7)
78 #define LP5569_STARTUP_BUSY BIT(6)
79 #define LP5569_ENGINE_BUSY BIT(5)
80 #define LP5569_ENGINE1_INT BIT(2)
81 #define LP5569_ENGINE2_INT BIT(1)
82 #define LP5569_ENGINE3_INT BIT(0)
83 #define LP5569_ENG_STATUS_MASK (LP5569_ENGINE1_INT | LP5569_ENGINE2_INT | \
84 LP5569_ENGINE3_INT)
85 #define LP5569_REG_IO_CONTROL 0x3D
86 #define LP5569_CLK_OUTPUT BIT(3)
87 #define LP5569_REG_RESET 0x3F
88 #define LP5569_RESET 0xFF
89 #define LP5569_REG_MASTER_FADER_BASE 0x46
90 #define LP5569_REG_CH1_PROG_START 0x4B
91 #define LP5569_REG_CH2_PROG_START 0x4C
92 #define LP5569_REG_CH3_PROG_START 0x4D
93 #define LP5569_REG_PROG_PAGE_SEL 0x4F
94 #define LP5569_REG_PROG_MEM 0x50
95 #define LP5569_REG_LED_FAULT1 0x81
96 #define LP5569_LED_FAULT8 BIT(0)
97 #define LP5569_REG_LED_FAULT2 0x82
98 #define LP5569_LED_FAULT7 BIT(7)
99 #define LP5569_LED_FAULT6 BIT(6)
100 #define LP5569_LED_FAULT5 BIT(5)
101 #define LP5569_LED_FAULT4 BIT(4)
102 #define LP5569_LED_FAULT3 BIT(3)
103 #define LP5569_LED_FAULT2 BIT(2)
104 #define LP5569_LED_FAULT1 BIT(1)
105 #define LP5569_LED_FAULT0 BIT(0)
106
107 #define LP5569_MAX_LEDS 9
108
109 #define LP5569_PROGRAM_PAGES 16
110 #define LP5569_PROGRAM_LENGTH 32 /* bytes */
111 /* Memory is used like this:
112 * 0x00 engine 1 program
113 * 0x10 engine 2 program
114 * 0x20 engine 3 program
115 * 0x30 engine 1 muxing info
116 * 0x40 engine 2 muxing info
117 * 0x50 engine 3 muxing info
118 */
119 #define LP5569_ENG1_PROG_ADDR 0x0
120 #define LP5569_ENG2_PROG_ADDR 0x10
121 #define LP5569_ENG3_PROG_ADDR 0x20
122 #define LP5569_ENG1_MUX_ADDR 0x30
123 #define LP5569_ENG2_MUX_ADDR 0x40
124 #define LP5569_ENG3_MUX_ADDR 0x50
125
126 /* Memory Page Selection */
127 #define LP5569_PAGE_ENG_OFFSET 0
128 #define LP5569_PAGE_ENG(n) (((n) - 1) + LP5569_PAGE_ENG_OFFSET)
129 #define LP5569_PAGE_MUX_OFFSET 3
130 #define LP5569_PAGE_MUX(n) (((n) - 1) + LP5569_PAGE_MUX_OFFSET)
131
132 #define LEDn_STATUS_FAULT(n, status) ((status) >> (n) & BIT(0))
133 #define LED_ACTIVE(mux, led) (!!((mux) & (0x0001 << (led))))
134
135 #define LP5569_DEFAULT_CONFIG \
136 (LP5569_AUTO_INC | LP5569_PWR_SAVE | LP5569_PWM_PWR_SAVE)
137
138 enum lp5569_chip_id {
139 LP5569,
140 };
141
142 static int lp5569_init_program_engine(struct lp55xx_chip *chip);
143
144 static inline void lp5569_wait_opmode_done(void)
145 {
146 usleep_range(1000, 2000);
147 }
148
149 static void lp5569_set_led_current(struct lp55xx_led *led, u8 led_current)
150 {
151 led->led_current = led_current;
152 lp55xx_write(led->chip, LP5569_REG_LED_CURRENT_BASE + led->chan_nr,
153 led_current);
154 }
155
156 static int lp5569_post_init_device(struct lp55xx_chip *chip)
157 {
158 int ret;
159 int val;
160
161 ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
162 if (ret)
163 return ret;
164
165 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
166 usleep_range(1000, 2000);
167
168 val = LP5569_DEFAULT_CONFIG;
> 169 val |= FIELD_PREP(LP5569_CP_MODE_MASK, chip->pdata->charge_pump_mode);
170
171 if (chip->pdata->clock_mode == LP55XX_CLOCK_INT)
172 val |= LP5569_INTERNAL_CLK;
173
174 ret = lp55xx_write(chip, LP5569_REG_MISC, val);
175 if (ret)
176 return ret;
177
178 if (chip->pdata->clock_mode == LP55XX_CLOCK_INT) {
179 ret = lp55xx_update_bits(chip, LP5569_REG_IO_CONTROL,
180 LP5569_CLK_OUTPUT,
181 LP5569_CLK_OUTPUT);
182 if (ret)
183 return ret;
184 }
185
186 return lp5569_init_program_engine(chip);
187 }
188
189 static void lp5569_load_engine(struct lp55xx_chip *chip)
190 {
191 enum lp55xx_engine_index idx = chip->engine_idx;
192 u8 mask, val;
193
194 mask = LP5569_MODE_ENGn_MASK(idx);
195 val = LP5569_MODE_LOAD_ENG << LP5569_MODE_ENGn_SHIFT(idx);
196
197 lp55xx_update_bits(chip, LP5569_REG_OP_MODE, mask, val);
198
199 lp5569_wait_opmode_done();
200 }
201
202 static void lp5569_load_engine_and_select_page(struct lp55xx_chip *chip)
203 {
204 enum lp55xx_engine_index idx = chip->engine_idx;
205
206 lp5569_load_engine(chip);
207
208 lp55xx_write(chip, LP5569_REG_PROG_PAGE_SEL, LP5569_PAGE_ENG(idx));
209 }
210
211 static void lp5569_stop_all_engines(struct lp55xx_chip *chip)
212 {
213 lp55xx_write(chip, LP5569_REG_OP_MODE, 0);
214 lp5569_wait_opmode_done();
215 }
216
217 static void lp5569_stop_engine(struct lp55xx_chip *chip)
218 {
219 enum lp55xx_engine_index idx = chip->engine_idx;
220
221 lp55xx_update_bits(chip, LP5569_REG_OP_MODE, LP5569_MODE_ENGn_MASK(idx), 0);
222
223 lp5569_wait_opmode_done();
224 }
225
226 static void lp5569_turn_off_channels(struct lp55xx_chip *chip)
227 {
228 int i;
229
230 for (i = 0; i < LP5569_MAX_LEDS; i++)
231 lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + i, 0);
232 }
233
234 static void lp5569_run_engine(struct lp55xx_chip *chip, bool start)
235 {
236 int i, ret;
237 u8 mode;
238 u8 exec;
239
240 /* stop engine */
241 if (!start) {
242 lp5569_stop_engine(chip);
243 lp5569_turn_off_channels(chip);
244 return;
245 }
246
247 /*
248 * To run the engine,
249 * operation mode and enable register should updated at the same time
250 */
251
252 ret = lp55xx_read(chip, LP5569_REG_OP_MODE, &mode);
253 if (ret)
254 return;
255
256 ret = lp55xx_read(chip, LP5569_REG_EXEC_CTRL, &exec);
257 if (ret)
258 return;
259
260 /* change operation mode to RUN only when each engine is loading */
261 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
262 if (LP5569_MODE_ENGn_GET(i, mode) != LP5569_MODE_LOAD_ENG)
263 continue;
264
265 mode &= ~LP5569_MODE_ENGn_MASK(i);
266 mode |= LP5569_MODE_RUN_ENG << LP5569_MODE_ENGn_SHIFT(i);
267 exec &= ~LP5569_EXEC_ENGn_MASK(i);
268 exec |= LP5569_EXEC_RUN_ENG << LP5569_EXEC_ENGn_SHIFT(i);
269 }
270
271 lp55xx_write(chip, LP5569_REG_OP_MODE, mode);
272 lp5569_wait_opmode_done();
273
274 lp55xx_write(chip, LP5569_REG_EXEC_CTRL, exec);
275 }
276
277 static int lp5569_init_program_engine(struct lp55xx_chip *chip)
278 {
279 int i;
280 int j;
281 int ret;
282 u8 status;
283 /* one pattern per engine setting LED MUX start and stop addresses */
284 static const u8 pattern[][LP5569_PROGRAM_LENGTH] = {
285 { 0x9c, LP5569_ENG1_MUX_ADDR, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
286 { 0x9c, LP5569_ENG2_MUX_ADDR, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
287 { 0x9c, LP5569_ENG3_MUX_ADDR, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
288 };
289
290 /* hardcode 32 bytes of memory for each engine from program memory */
291 ret = lp55xx_write(chip, LP5569_REG_CH1_PROG_START, LP5569_ENG1_PROG_ADDR);
292 if (ret)
293 return ret;
294
295 ret = lp55xx_write(chip, LP5569_REG_CH2_PROG_START, LP5569_ENG2_PROG_ADDR);
296 if (ret)
297 return ret;
298
299 ret = lp55xx_write(chip, LP5569_REG_CH3_PROG_START, LP5569_ENG3_PROG_ADDR);
300 if (ret)
301 return ret;
302
303 /* write LED MUX address space for each engine */
304 for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
305 chip->engine_idx = i;
306 lp5569_load_engine_and_select_page(chip);
307
308 for (j = 0; j < LP5569_PROGRAM_LENGTH; j++) {
309 ret = lp55xx_write(chip, LP5569_REG_PROG_MEM + j,
310 pattern[i - 1][j]);
311 if (ret)
312 goto out;
313 }
314 }
315
316 lp5569_run_engine(chip, true);
317
318 /* Let the programs run for couple of ms and check the engine status */
319 usleep_range(3000, 6000);
320 lp55xx_read(chip, LP5569_REG_STATUS, &status);
> 321 status = FIELD_GET(LP5569_ENG_STATUS_MASK, status);
322
323 if (status != LP5569_ENG_STATUS_MASK) {
324 dev_err(&chip->cl->dev,
325 "could not configure LED engine, status = 0x%.2x\n",
326 status);
327 ret = -1;
328 }
329
330 out:
331 lp5569_stop_all_engines(chip);
332 return ret;
333 }
334
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2024-05-16 18:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-15 14:31 [PATCH 1/3] dt-bindings: leds-lp55xx: limit pwr-sel property to ti,lp8501 Christian Marangi
2024-05-15 14:31 ` [PATCH 2/3] dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible Christian Marangi
2024-05-15 15:35 ` Conor Dooley
2024-05-15 14:31 ` [PATCH 3/3] leds: leds-lp5569: Add support for Texas Instruments LP5569 Christian Marangi
2024-05-16 18:20 ` kernel test robot [this message]
2024-05-18 12:46 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202405170244.MEWiW9it-lkp@intel.com \
--to=lkp@intel.com \
--cc=ansuelsmth@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=pavel@ucw.cz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).