From: Fiona Klute <fiona.klute@gmx.de>
To: linux-wireless@vger.kernel.org, pkshih@realtek.com
Cc: Fiona Klute <fiona.klute@gmx.de>,
kvalo@kernel.org, ulf.hansson@linaro.org,
linux-mmc@vger.kernel.org, pavel@ucw.cz, megi@xff.cz
Subject: [PATCH v2 0/9] rtw88: Add support for RTL8723CS/RTL8703B
Date: Wed, 28 Feb 2024 00:54:54 +0100 [thread overview]
Message-ID: <20240227235507.781615-1-fiona.klute@gmx.de> (raw)
This patch set adds a driver for RTL8723CS, which is used in the
Pinephone and a few other devices. It is a combined wifi/bluetooth
device, the wifi part is called RTL8703B. There is already a mainline
driver for the bluetooth part. RTL8703B is similar to the RTL8723D
chip already supported by rtw88. I've been using the out-of-tree
rtl8723cs driver as reference.
Station and monitor mode work well enough for daily use on my
Pinephone, I have not tested other modes yet. WOW firmware is
declared, but WOW isn't implemented yet. RX rates stay fairly low
still.
Ping-Ke Shih kindly offered to add the required s-o-b for the firmware
and help get it into linux-firmware when it's time, for testing now
please see the code I used to extract firmware from the out-of-tree
driver [1].
I'm trying to follow the "one file per patch" rule for new drivers
while integrating with the existing rtw88 code, please let me know if
I should split it differently. I'll be including a few questions for
reviewers in the relevant patch mails.
Thanks to Ping-Ke Shih for advice, and Ondřej Jirman for debug logs!
[1] https://github.com/airtower-luna/rtw8703b-fw-extractor
v2:
* Parse PHY status using struct instead of macros
* Prefer MAC from EFUSE if available, move retrieving MAC from DT to
a separate function
* Tidy up wait for IQK to be done, replace mdelay loop with
read_poll_timeout
* Set dual author for rtw88_8723x
* Add missing "static" to rtw8723x function declarations, fixes
build failure when not built as a module
* Various style fixes
Fiona Klute (9):
wifi: rtw88: Shared module for rtw8723x devices
wifi: rtw88: Debug output for rtw8723x EFUSE
wifi: rtw88: Add definitions for 8703b chip
wifi: rtw88: Add rtw8703b.h
wifi: rtw88: Add rtw8703b.c
wifi: rtw88: Add rtw8703b_tables.h
wifi: rtw88: Add rtw8703b_tables.c
wifi: rtw88: Reset 8703b firmware before download
wifi: rtw88: SDIO device driver for RTL8723CS
drivers/net/wireless/realtek/rtw88/Kconfig | 22 +
drivers/net/wireless/realtek/rtw88/Makefile | 9 +
drivers/net/wireless/realtek/rtw88/mac.c | 6 +
drivers/net/wireless/realtek/rtw88/main.h | 3 +
drivers/net/wireless/realtek/rtw88/rtw8703b.c | 2112 +++++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw8703b.h | 103 +
.../wireless/realtek/rtw88/rtw8703b_tables.c | 901 +++++++
.../wireless/realtek/rtw88/rtw8703b_tables.h | 14 +
.../net/wireless/realtek/rtw88/rtw8723cs.c | 34 +
drivers/net/wireless/realtek/rtw88/rtw8723d.c | 673 +-----
drivers/net/wireless/realtek/rtw88/rtw8723d.h | 269 +--
drivers/net/wireless/realtek/rtw88/rtw8723x.c | 721 ++++++
drivers/net/wireless/realtek/rtw88/rtw8723x.h | 518 ++++
include/linux/mmc/sdio_ids.h | 1 +
14 files changed, 4486 insertions(+), 900 deletions(-)
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.c
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b.h
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b_tables.c
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8703b_tables.h
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723cs.c
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723x.c
create mode 100644 drivers/net/wireless/realtek/rtw88/rtw8723x.h
--
2.43.0
next reply other threads:[~2024-02-27 23:55 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-27 23:54 Fiona Klute [this message]
2024-02-27 23:54 ` [PATCH v2 1/9] wifi: rtw88: Shared module for rtw8723x devices Fiona Klute
2024-02-27 23:54 ` [PATCH v2 2/9] wifi: rtw88: Debug output for rtw8723x EFUSE Fiona Klute
2024-02-27 23:54 ` [PATCH v2 3/9] wifi: rtw88: Add definitions for 8703b chip Fiona Klute
2024-02-27 23:54 ` [PATCH v2 4/9] wifi: rtw88: Add rtw8703b.h Fiona Klute
2024-03-01 2:09 ` Ping-Ke Shih
2024-03-01 16:35 ` Fiona Klute
2024-03-01 17:15 ` Fiona Klute
2024-03-02 0:35 ` Ping-Ke Shih
2024-03-02 0:33 ` Ping-Ke Shih
2024-03-02 0:57 ` Fiona Klute
2024-02-27 23:54 ` [PATCH v2 5/9] wifi: rtw88: Add rtw8703b.c Fiona Klute
2024-03-01 2:33 ` Ping-Ke Shih
2024-03-01 4:36 ` Ping-Ke Shih
2024-03-01 16:54 ` Fiona Klute
2024-02-27 23:55 ` [PATCH v2 6/9] wifi: rtw88: Add rtw8703b_tables.h Fiona Klute
2024-02-27 23:55 ` [PATCH v2 7/9] wifi: rtw88: Add rtw8703b_tables.c Fiona Klute
2024-03-01 2:36 ` Ping-Ke Shih
2024-03-01 16:46 ` Fiona Klute
2024-03-02 0:28 ` Ping-Ke Shih
2024-02-27 23:55 ` [PATCH v2 8/9] wifi: rtw88: Reset 8703b firmware before download Fiona Klute
2024-02-27 23:55 ` [PATCH v2 9/9] wifi: rtw88: SDIO device driver for RTL8723CS Fiona Klute
2024-03-01 2:39 ` Ping-Ke Shih
2024-02-29 6:40 ` [PATCH v2 0/9] rtw88: Add support for RTL8723CS/RTL8703B Ping-Ke Shih
2024-03-01 0:45 ` Fiona Klute
2024-03-01 0:57 ` Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240227235507.781615-1-fiona.klute@gmx.de \
--to=fiona.klute@gmx.de \
--cc=kvalo@kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=megi@xff.cz \
--cc=pavel@ucw.cz \
--cc=pkshih@realtek.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).