From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
Nicolas Saenz Julienne <nsaenz@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
james.quinlan@broadcom.com
Cc: "Florian Fainelli" <florian.fainelli@broadcom.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] PCI: brcmstb: Fix use of incorrect constant
Date: Fri, 3 Oct 2025 13:04:36 -0400 [thread overview]
Message-ID: <20251003170436.1446030-1-james.quinlan@broadcom.com> (raw)
The driver was using the PCIE_LINK_STATE_L1 constant as a field mask for
setting the private PCI_EXP_LNKCAP register, but this constant is
Linux-created and has nothing to do with the PCIe spec. Serendipitously,
the value of this constant was correct for its usage until after 6.1, when
its value changed from BIT(1) to BIT(2);
In addition, the driver was assuming that the HW is ASPM L1 capable when it
should not be telling the HW what it is capable of.
Fixes: caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
drivers/pci/controller/pcie-brcmstb.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9afbd02ded35..7e9b2f6a604a 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -48,7 +48,6 @@
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK 0x1f0
-#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00
#define PCIE_RC_CFG_PRIV1_ROOT_CAP 0x4f8
#define PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK 0xf8
@@ -1075,7 +1074,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
void __iomem *base = pcie->base;
struct pci_host_bridge *bridge;
struct resource_entry *entry;
- u32 tmp, burst, aspm_support, num_lanes, num_lanes_cap;
+ u32 tmp, burst, num_lanes, num_lanes_cap;
u8 num_out_wins = 0;
int num_inbound_wins = 0;
int memc, ret;
@@ -1175,12 +1174,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
/* Don't advertise L0s capability if 'aspm-no-l0s' */
- aspm_support = PCIE_LINK_STATE_L1;
- if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
- aspm_support |= PCIE_LINK_STATE_L0S;
tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
- u32p_replace_bits(&tmp, aspm_support,
- PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+ if (of_property_read_bool(pcie->np, "aspm-no-l0s"))
+ tmp &= ~PCI_EXP_LNKCAP_ASPM_L0S;
writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
/* 'tmp' still holds the contents of PRIV1_LINK_CAPABILITY */
base-commit: 4ff71af020ae59ae2d83b174646fc2ad9fcd4dc4
--
2.34.1
next reply other threads:[~2025-10-03 17:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-03 17:04 Jim Quinlan [this message]
2025-10-06 19:35 ` [PATCH] PCI: brcmstb: Fix use of incorrect constant Florian Fainelli
2025-10-20 6:48 ` Manivannan Sadhasivam
2025-10-22 22:45 ` Bjorn Helgaas
2025-10-28 20:01 ` James Quinlan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251003170436.1446030-1-james.quinlan@broadcom.com \
--to=james.quinlan@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bhelgaas@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=jim2101024@gmail.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=nsaenz@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).