From: Terry Bowman <terry.bowman@amd.com>
To: <dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
<dave.jiang@intel.com>, <alison.schofield@intel.com>,
<dan.j.williams@intel.com>, <bhelgaas@google.com>,
<shiju.jose@huawei.com>, <ming.li@zohomail.com>,
<Smita.KoralahalliChannabasappa@amd.com>, <rrichter@amd.com>,
<dan.carpenter@linaro.org>, <PradeepVineshReddy.Kodamati@amd.com>,
<lukas@wunner.de>, <Benjamin.Cheatham@amd.com>,
<sathyanarayanan.kuppuswamy@linux.intel.com>,
<linux-cxl@vger.kernel.org>, <alucerop@amd.com>,
<ira.weiny@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<terry.bowman@amd.com>
Subject: [PATCH v13 01/25] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h
Date: Mon, 3 Nov 2025 18:09:37 -0600 [thread overview]
Message-ID: <20251104001001.3833651-2-terry.bowman@amd.com> (raw)
In-Reply-To: <20251104001001.3833651-1-terry.bowman@amd.com>
The CXL DVSECs are currently defined in cxl/core/cxlpci.h. These are not
accessible to other subsystems. Move these to uapi/linux/pci_regs.h.
Change DVSEC name formatting to follow the existing PCI format in
pci_regs.h. The current format uses CXL_DVSEC_XYZ and the CXL defines must
be changed to be PCI_DVSEC_CXL_XYZ to match existing pci_regs.h. Leave
PCI_DVSEC_CXL_PORT* defines as-is because they are already defined and may
be in use by userspace application(s).
Update existing usage to match the name change.
Update the inline documentation to refer to latest CXL spec version.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
----
Changes in v12->v13:
- Add Dave Jiang's reviewed-by
- Remove changes to existing PCI_DVSEC_CXL_PORT* defines. Update commit
message. (Jonathan)
Changes in v11 -> v12:
- Change formatting to be same as existing definitions
- Change GENMASK() -> __GENMASK() and BIT() to _BITUL()
Changes in v10 -> v11:
- New commit
---
drivers/cxl/core/pci.c | 62 +++++++++++++++++-----------------
drivers/cxl/core/regs.c | 12 +++----
drivers/cxl/cxlpci.h | 53 -----------------------------
drivers/cxl/pci.c | 2 +-
drivers/pci/pci.c | 4 ++-
include/uapi/linux/pci_regs.h | 63 ++++++++++++++++++++++++++++++++---
6 files changed, 100 insertions(+), 96 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 18825e1505d6..cbc8defa6848 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -158,19 +158,19 @@ static int cxl_dvsec_mem_range_valid(struct cxl_dev_state *cxlds, int id)
int rc, i;
u32 temp;
- if (id > CXL_DVSEC_RANGE_MAX)
+ if (id > PCI_DVSEC_CXL_RANGE_MAX)
return -EINVAL;
/* Check MEM INFO VALID bit first, give up after 1s */
i = 1;
do {
rc = pci_read_config_dword(pdev,
- d + CXL_DVSEC_RANGE_SIZE_LOW(id),
+ d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id),
&temp);
if (rc)
return rc;
- valid = FIELD_GET(CXL_DVSEC_MEM_INFO_VALID, temp);
+ valid = FIELD_GET(PCI_DVSEC_CXL_MEM_INFO_VALID, temp);
if (valid)
break;
msleep(1000);
@@ -194,17 +194,17 @@ static int cxl_dvsec_mem_range_active(struct cxl_dev_state *cxlds, int id)
int rc, i;
u32 temp;
- if (id > CXL_DVSEC_RANGE_MAX)
+ if (id > PCI_DVSEC_CXL_RANGE_MAX)
return -EINVAL;
/* Check MEM ACTIVE bit, up to 60s timeout by default */
for (i = media_ready_timeout; i; i--) {
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(id), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id), &temp);
if (rc)
return rc;
- active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
+ active = FIELD_GET(PCI_DVSEC_CXL_MEM_ACTIVE, temp);
if (active)
break;
msleep(1000);
@@ -233,11 +233,11 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
u16 cap;
rc = pci_read_config_word(pdev,
- d + CXL_DVSEC_CAP_OFFSET, &cap);
+ d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
if (rc)
return rc;
- hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
+ hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
for (i = 0; i < hdm_count; i++) {
rc = cxl_dvsec_mem_range_valid(cxlds, i);
if (rc)
@@ -265,16 +265,16 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
u16 ctrl;
int rc;
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
if (rc < 0)
return rc;
- if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val)
+ if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val)
return 1;
- ctrl &= ~CXL_DVSEC_MEM_ENABLE;
+ ctrl &= ~PCI_DVSEC_CXL_MEM_ENABLE;
ctrl |= val;
- rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl);
+ rc = pci_write_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, ctrl);
if (rc < 0)
return rc;
@@ -290,7 +290,7 @@ static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds)
{
int rc;
- rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE);
+ rc = cxl_set_mem_enable(cxlds, PCI_DVSEC_CXL_MEM_ENABLE);
if (rc < 0)
return rc;
if (rc > 0)
@@ -352,11 +352,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
return -ENXIO;
}
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
if (rc)
return rc;
- if (!(cap & CXL_DVSEC_MEM_CAPABLE)) {
+ if (!(cap & PCI_DVSEC_CXL_MEM_CAPABLE)) {
dev_dbg(dev, "Not MEM Capable\n");
return -ENXIO;
}
@@ -367,7 +367,7 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
* driver is for a spec defined class code which must be CXL.mem
* capable, there is no point in continuing to enable CXL.mem.
*/
- hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
+ hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
if (!hdm_count || hdm_count > 2)
return -EINVAL;
@@ -376,11 +376,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
* disabled, and they will remain moot after the HDM Decoder
* capability is enabled.
*/
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
if (rc)
return rc;
- info->mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl);
+ info->mem_enabled = FIELD_GET(PCI_DVSEC_CXL_MEM_ENABLE, ctrl);
if (!info->mem_enabled)
return 0;
@@ -393,35 +393,35 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
return rc;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i), &temp);
if (rc)
return rc;
size = (u64)temp << 32;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(i), &temp);
if (rc)
return rc;
- size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK;
+ size |= temp & PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK;
if (!size) {
continue;
}
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_BASE_HIGH(i), &temp);
if (rc)
return rc;
base = (u64)temp << 32;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_BASE_LOW(i), &temp);
if (rc)
return rc;
- base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK;
+ base |= temp & PCI_DVSEC_CXL_MEM_BASE_LOW_MASK;
info->dvsec_range[ranges++] = (struct range) {
.start = base,
@@ -1147,7 +1147,7 @@ u16 cxl_gpf_get_dvsec(struct device *dev)
is_port = false;
dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
- is_port ? CXL_DVSEC_PORT_GPF : CXL_DVSEC_DEVICE_GPF);
+ is_port ? PCI_DVSEC_CXL_PORT_GPF : PCI_DVSEC_CXL_DEVICE_GPF);
if (!dvsec)
dev_warn(dev, "%s GPF DVSEC not present\n",
is_port ? "Port" : "Device");
@@ -1163,14 +1163,14 @@ static int update_gpf_port_dvsec(struct pci_dev *pdev, int dvsec, int phase)
switch (phase) {
case 1:
- offset = CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET;
- base = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK;
- scale = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
+ offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET;
+ base = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK;
+ scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
break;
case 2:
- offset = CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET;
- base = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK;
- scale = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
+ offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET;
+ base = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK;
+ scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
break;
default:
return -EINVAL;
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 5ca7b0eed568..fb70ffbba72d 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -271,10 +271,10 @@ EXPORT_SYMBOL_NS_GPL(cxl_map_device_regs, "CXL");
static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi,
struct cxl_register_map *map)
{
- u8 reg_type = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
- int bar = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BIR_MASK, reg_lo);
+ u8 reg_type = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
+ int bar = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK, reg_lo);
u64 offset = ((u64)reg_hi << 32) |
- (reg_lo & CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
+ (reg_lo & PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
if (offset > pci_resource_len(pdev, bar)) {
dev_warn(&pdev->dev,
@@ -311,15 +311,15 @@ static int __cxl_find_regblock_instance(struct pci_dev *pdev, enum cxl_regloc_ty
};
regloc = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
- CXL_DVSEC_REG_LOCATOR);
+ PCI_DVSEC_CXL_REG_LOCATOR);
if (!regloc)
return -ENXIO;
pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, ®loc_size);
regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
- regloc += CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET;
- regblocks = (regloc_size - CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET) / 8;
+ regloc += PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET;
+ regblocks = (regloc_size - PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET) / 8;
for (i = 0; i < regblocks; i++, regloc += 8) {
u32 reg_lo, reg_hi;
diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
index 7ae621e618e7..4985dbd90069 100644
--- a/drivers/cxl/cxlpci.h
+++ b/drivers/cxl/cxlpci.h
@@ -7,59 +7,6 @@
#define CXL_MEMORY_PROGIF 0x10
-/*
- * See section 8.1 Configuration Space Registers in the CXL 2.0
- * Specification. Names are taken straight from the specification with "CXL" and
- * "DVSEC" redundancies removed. When obvious, abbreviations may be used.
- */
-#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
-
-/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
-#define CXL_DVSEC_PCIE_DEVICE 0
-#define CXL_DVSEC_CAP_OFFSET 0xA
-#define CXL_DVSEC_MEM_CAPABLE BIT(2)
-#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
-#define CXL_DVSEC_CTRL_OFFSET 0xC
-#define CXL_DVSEC_MEM_ENABLE BIT(2)
-#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
-#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
-#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
-#define CXL_DVSEC_MEM_ACTIVE BIT(1)
-#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
-#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
-#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
-#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
-
-#define CXL_DVSEC_RANGE_MAX 2
-
-/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
-#define CXL_DVSEC_FUNCTION_MAP 2
-
-/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
-#define CXL_DVSEC_PORT_EXTENSIONS 3
-
-/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
-#define CXL_DVSEC_PORT_GPF 4
-#define CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
-#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0)
-#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8)
-#define CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
-#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0)
-#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8)
-
-/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
-#define CXL_DVSEC_DEVICE_GPF 5
-
-/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
-#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
-
-/* CXL 2.0 8.1.9: Register Locator DVSEC */
-#define CXL_DVSEC_REG_LOCATOR 8
-#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC
-#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
-#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
-#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
-
/*
* NOTE: Currently all the functions which are enabled for CXL require their
* vectors to be in the first 16. Use this as the default max.
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index bd100ac31672..bd95be1f3d5c 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -933,7 +933,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
cxlds->rcd = is_cxl_restricted(pdev);
cxlds->serial = pci_get_dsn(pdev);
cxlds->cxl_dvsec = pci_find_dvsec_capability(
- pdev, PCI_VENDOR_ID_CXL, CXL_DVSEC_PCIE_DEVICE);
+ pdev, PCI_VENDOR_ID_CXL, PCI_DVSEC_CXL_DEVICE);
if (!cxlds->cxl_dvsec)
dev_warn(&pdev->dev,
"Device DVSEC not present, skip CXL.mem init\n");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b14dd064006c..53a49bb32514 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5002,7 +5002,9 @@ static bool cxl_sbr_masked(struct pci_dev *dev)
if (!dvsec)
return false;
- rc = pci_read_config_word(dev, dvsec + PCI_DVSEC_CXL_PORT_CTL, ®);
+ rc = pci_read_config_word(dev,
+ dvsec + PCI_DVSEC_CXL_PORT_CTL,
+ ®);
if (rc || PCI_POSSIBLE_ERROR(reg))
return false;
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 07e06aafec50..279b92f01d08 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -1244,9 +1244,64 @@
/* Deprecated old name, replaced with PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE */
#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE
-/* Compute Express Link (CXL r3.1, sec 8.1.5) */
-#define PCI_DVSEC_CXL_PORT 3
-#define PCI_DVSEC_CXL_PORT_CTL 0x0c
-#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001
+/* Compute Express Link (CXL r3.2, sec 8.1)
+ *
+ * Note that CXL DVSEC id 3 and 7 to be ignored when the CXL link state
+ * is "disconnected" (CXL r3.2, sec 9.12.3). Re-enumerate these
+ * registers on downstream link-up events.
+ */
+
+#define PCI_DVSEC_HEADER1_LENGTH_MASK __GENMASK(31, 20)
+
+/* CXL 3.2 8.1.3: PCIe DVSEC for CXL Device */
+#define PCI_DVSEC_CXL_DEVICE 0
+#define PCI_DVSEC_CXL_CAP_OFFSET 0xA
+#define PCI_DVSEC_CXL_MEM_CAPABLE _BITUL(2)
+#define PCI_DVSEC_CXL_HDM_COUNT_MASK __GENMASK(5, 4)
+#define PCI_DVSEC_CXL_CTRL_OFFSET 0xC
+#define PCI_DVSEC_CXL_MEM_ENABLE _BITUL(2)
+#define PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
+#define PCI_DVSEC_CXL_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
+#define PCI_DVSEC_CXL_MEM_INFO_VALID _BITUL(0)
+#define PCI_DVSEC_CXL_MEM_ACTIVE _BITUL(1)
+#define PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK __GENMASK(31, 28)
+#define PCI_DVSEC_CXL_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
+#define PCI_DVSEC_CXL_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
+#define PCI_DVSEC_CXL_MEM_BASE_LOW_MASK __GENMASK(31, 28)
+
+#define PCI_DVSEC_CXL_RANGE_MAX 2
+
+/* CXL 3.2 8.1.4: Non-CXL Function Map DVSEC */
+#define PCI_DVSEC_CXL_FUNCTION_MAP 2
+
+/* CXL 3.2 8.1.5: Extensions DVSEC for Ports */
+#define PCI_DVSEC_CXL_PORT 3
+#define PCI_DVSEC_CXL_PORT_CTL 0x0c
+#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001
+
+/* CXL 3.2 8.1.6: GPF DVSEC for CXL Port */
+#define PCI_DVSEC_CXL_PORT_GPF 4
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK __GENMASK(3, 0)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK __GENMASK(11, 8)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK __GENMASK(3, 0)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK __GENMASK(11, 8)
+
+/* CXL 3.2 8.1.7: GPF DVSEC for CXL Device */
+#define PCI_DVSEC_CXL_DEVICE_GPF 5
+
+/* CXL 3.2 8.1.8: PCIe DVSEC for Flex Bus Port */
+#define PCI_DVSEC_CXL_FLEXBUS_PORT 7
+#define PCI_DVSEC_CXL_FLEXBUS_STATUS_OFFSET 0xE
+#define PCI_DVSEC_CXL_FLEXBUS_STATUS_CACHE_MASK _BITUL(0)
+#define PCI_DVSEC_CXL_FLEXBUS_STATUS_MEM_MASK _BITUL(2)
+
+/* CXL 3.2 8.1.9: Register Locator DVSEC */
+#define PCI_DVSEC_CXL_REG_LOCATOR 8
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET 0xC
+#define PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK __GENMASK(2, 0)
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK __GENMASK(15, 8)
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK __GENMASK(31, 16)
#endif /* LINUX_PCI_REGS_H */
--
2.34.1
next prev parent reply other threads:[~2025-11-04 0:10 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 0:09 [PATCH v13 00/25] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2025-11-04 0:09 ` Terry Bowman [this message]
2025-12-06 0:31 ` [PATCH v13 01/25] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h Bjorn Helgaas
2025-12-06 0:41 ` dan.j.williams
2025-12-06 1:56 ` Bjorn Helgaas
2025-12-06 4:56 ` dan.j.williams
2025-11-04 0:09 ` [PATCH v13 02/25] PCI/CXL: Introduce pcie_is_cxl() Terry Bowman
2025-12-06 0:45 ` Bjorn Helgaas
2025-12-08 15:26 ` Bowman, Terry
2025-12-08 18:33 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 03/25] cxl/pci: Remove unnecessary CXL Endpoint handling helper functions Terry Bowman
2025-11-04 0:09 ` [PATCH v13 04/25] cxl/pci: Remove unnecessary CXL RCH " Terry Bowman
2025-11-04 0:09 ` [PATCH v13 05/25] cxl: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c Terry Bowman
2025-11-04 0:09 ` [PATCH v13 06/25] cxl: Move CXL driver's RCH error handling into core/ras_rch.c Terry Bowman
2025-11-04 0:09 ` [PATCH v13 07/25] CXL/AER: Replace device_lock() in cxl_rch_handle_error_iter() with guard() lock Terry Bowman
2025-12-08 18:05 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 08/25] CXL/AER: Move AER drivers RCH error handling into pcie/aer_cxl_rch.c Terry Bowman
2025-12-08 18:06 ` Bjorn Helgaas
2025-12-08 21:28 ` Bowman, Terry
2025-12-10 21:57 ` Bowman, Terry
2025-12-10 23:12 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 09/25] PCI/AER: Report CXL or PCIe bus error type in trace logging Terry Bowman
2025-11-04 0:09 ` [PATCH v13 10/25] cxl/pci: Update RAS handler interfaces to also support CXL Ports Terry Bowman
2025-11-04 0:09 ` [PATCH v13 11/25] cxl/pci: Log message if RAS registers are unmapped Terry Bowman
2025-11-04 0:09 ` [PATCH v13 12/25] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports Terry Bowman
2025-11-04 0:09 ` [PATCH v13 13/25] cxl/pci: Update cxl_handle_cor_ras() to return early if no RAS errors Terry Bowman
2025-11-04 0:09 ` [PATCH v13 14/25] cxl/pci: Map CXL Endpoint Port and CXL Switch Port RAS registers Terry Bowman
2025-11-04 0:09 ` [PATCH v13 15/25] CXL/PCI: Introduce PCI_ERS_RESULT_PANIC Terry Bowman
2025-11-04 0:09 ` [PATCH v13 16/25] CXL/AER: Introduce pcie/aer_cxl_vh.c in AER driver for forwarding CXL errors Terry Bowman
2025-12-08 18:36 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 17/25] cxl: Introduce cxl_pci_drv_bound() to check for bound driver Terry Bowman
2025-11-04 0:09 ` [PATCH v13 18/25] cxl: Change CXL handlers to use guard() instead of scoped_guard() Terry Bowman
2025-11-04 0:09 ` [PATCH v13 19/25] cxl/pci: Introduce CXL protocol error handlers for Endpoints Terry Bowman
2025-11-04 0:09 ` [PATCH v13 20/25] CXL/PCI: Introduce CXL Port protocol error handlers Terry Bowman
2025-12-08 18:37 ` Bjorn Helgaas
2025-12-09 15:17 ` Bowman, Terry
2025-11-04 0:09 ` [PATCH v13 21/25] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2025-11-04 0:09 ` [PATCH v13 22/25] CXL/PCI: Export and rename merge_result() to pci_ers_merge_result() Terry Bowman
2025-12-08 18:38 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104001001.3833651-2-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=bhelgaas@google.com \
--cc=dan.carpenter@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).