From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Marcel Holtmann <marcel@holtmann.org>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Kalle Valo <kvalo@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Saravana Kannan <saravanak@google.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Arnd Bergmann <arnd@arndb.de>,
Neil Armstrong <neil.armstrong@linaro.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Alex Elder <elder@linaro.org>,
Srini Kandagatla <srinivas.kandagatla@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Abel Vesa <abel.vesa@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Lukas Wunner <lukas@wunner.de>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>,
Xilin Wu <wuxilin123@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
linux-pm@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH v7 08/16] arm64: dts: qcom: qrb5165-rb5: add the Wifi node
Date: Wed, 10 Apr 2024 14:46:20 +0200 [thread overview]
Message-ID: <20240410124628.171783-9-brgl@bgdev.pl> (raw)
In-Reply-To: <20240410124628.171783-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a node for the PMU module of the QCA6391 present on the RB5 board.
Assign its LDO power outputs to the existing Bluetooth module. Add a
node for the PCIe port to sm8250.dtsi and define the WLAN node on it in
the board's .dts and also make it consume the power outputs of the PMU.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 103 ++++++++++++++++++++---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 +++
2 files changed, 102 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cd0db4f31d4a..24f528fc741f 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -108,6 +108,67 @@ lt9611_3v3: lt9611-3v3 {
regulator-always-on;
};
+ qca6390-pmu {
+ compatible = "qcom,qca6390-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+ vddaon-supply = <&vreg_s6a_0p95>;
+ vddpmu-supply = <&vreg_s2f_0p95>;
+ vddrfa0p95-supply = <&vreg_s2f_0p95>;
+ vddrfa1p3-supply = <&vreg_s8c_1p3>;
+ vddrfa1p9-supply = <&vreg_s5a_1p9>;
+ vddpcie1p3-supply = <&vreg_s8c_1p3>;
+ vddpcie1p9-supply = <&vreg_s5a_1p9>;
+ vddio-supply = <&vreg_s4a_1p8>;
+
+ wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+
thermal-zones {
conn-thermal {
polling-delay-passive = <0>;
@@ -734,6 +795,23 @@ &pcie0_phy {
vdda-pll-supply = <&vreg_l9a_1p2>;
};
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1101";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pcie1 {
status = "okay";
};
@@ -1303,6 +1381,14 @@ sdc2_card_det_n: sd-card-det-n-state {
function = "gpio";
bias-pull-up;
};
+
+ wlan_en_state: wlan-default-state {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
};
&uart6 {
@@ -1311,17 +1397,12 @@ &uart6 {
bluetooth {
compatible = "qcom,qca6390-bt";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_en_state>;
-
- enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-
- vddio-supply = <&vreg_s4a_1p8>;
- vddpmu-supply = <&vreg_s2f_0p95>;
- vddaon-supply = <&vreg_s6a_0p95>;
- vddrfa0p9-supply = <&vreg_s2f_0p95>;
- vddrfa1p3-supply = <&vreg_s8c_1p3>;
- vddrfa1p9-supply = <&vreg_s5a_1p9>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7f2333c9d17d..06decf15a2d3 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2203,6 +2203,16 @@ pcie0: pcie@1c00000 {
dma-coherent;
status = "disabled";
+
+ pcieport0: pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ bus-range = <0x01 0xff>;
+ };
};
pcie0_phy: phy@1c06000 {
--
2.40.1
next prev parent reply other threads:[~2024-04-10 12:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-10 12:46 [PATCH v7 00/16] power: sequencing: implement the subsystem and add first users Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package Bartosz Golaszewski
2024-04-24 20:48 ` Dmitry Baryshkov
2024-04-10 12:46 ` [PATCH v7 02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 03/16] dt-bindings: net: bluetooth: qualcomm: describe regulators for QCA6390 Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390 Bartosz Golaszewski
2024-04-12 7:53 ` Krzysztof Kozlowski
2024-04-10 12:46 ` [PATCH v7 05/16] dt-bindings: net: wireless: describe the ath12k PCI module Bartosz Golaszewski
2024-04-10 15:27 ` Jeff Johnson
2024-04-10 12:46 ` [PATCH v7 06/16] arm64: dts: qcom: sm8550-qrd: add the Wifi node Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 07/16] arm64: dts: qcom: sm8650-qrd: " Bartosz Golaszewski
2024-04-10 12:46 ` Bartosz Golaszewski [this message]
2024-04-10 12:46 ` [PATCH v7 09/16] PCI: hold the rescan mutex when scanning for the first time Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 10/16] PCI/pwrctl: reuse the OF node for power controlled devices Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 11/16] PCI/pwrctl: create platform devices for child OF nodes of the port node Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 12/16] PCI/pwrctl: add PCI power control core code Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 13/16] power: sequencing: implement the pwrseq core Bartosz Golaszewski
2024-04-14 10:39 ` Simon Horman
2024-04-10 12:46 ` [PATCH v7 14/16] power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets Bartosz Golaszewski
2024-04-10 15:57 ` Jeff Johnson
2024-04-14 10:44 ` Simon Horman
2024-04-10 12:46 ` [PATCH v7 15/16] Bluetooth: qca: use the power sequencer for QCA6390 Bartosz Golaszewski
2024-04-10 12:46 ` [PATCH v7 16/16] PCI/pwrctl: add a PCI power control driver for power sequenced devices Bartosz Golaszewski
2024-04-10 16:05 ` Jeff Johnson
2024-04-11 12:11 ` [PATCH v7 00/16] power: sequencing: implement the subsystem and add first users Amit Pundir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240410124628.171783-9-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=abel.vesa@linaro.org \
--cc=amit.pundir@linaro.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=bartosz.golaszewski@linaro.org \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=edumazet@google.com \
--cc=elder@linaro.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=kvalo@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=lukas@wunner.de \
--cc=m.szyprowski@samsung.com \
--cc=mani@kernel.org \
--cc=marcel@holtmann.org \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=saravanak@google.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=will@kernel.org \
--cc=wuxilin123@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).