From: "Yuan, Perry" <Perry.Yuan@amd.com>
To: Oleksandr Natalenko <oleksandr@natalenko.name>,
"rafael.j.wysocki@intel.com" <rafael.j.wysocki@intel.com>,
"viresh.kumar@linaro.org" <viresh.kumar@linaro.org>,
"Huang, Ray" <Ray.Huang@amd.com>,
"Shenoy, Gautham Ranjal" <gautham.shenoy@amd.com>,
"Petkov, Borislav" <Borislav.Petkov@amd.com>,
"Limonciello, Mario" <Mario.Limonciello@amd.com>
Cc: "Deucher, Alexander" <Alexander.Deucher@amd.com>,
"Huang, Shimmer" <Shimmer.Huang@amd.com>,
"Du, Xiaojian" <Xiaojian.Du@amd.com>,
"Meng, Li (Jassmine)" <Li.Meng@amd.com>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v10 0/7] AMD Pstate Driver Core Performance Boost
Date: Thu, 9 May 2024 16:03:28 +0000 [thread overview]
Message-ID: <CYYPR12MB86555D37D70EC0C4CB6A995E9CE62@CYYPR12MB8655.namprd12.prod.outlook.com> (raw)
In-Reply-To: <5777236.DvuYhMxLoT@natalenko.name>
[AMD Official Use Only - General]
Hi Oleksandr
> -----Original Message-----
> From: Oleksandr Natalenko <oleksandr@natalenko.name>
> Sent: Thursday, May 9, 2024 8:01 PM
> To: rafael.j.wysocki@intel.com; viresh.kumar@linaro.org; Huang, Ray
> <Ray.Huang@amd.com>; Shenoy, Gautham Ranjal
> <gautham.shenoy@amd.com>; Petkov, Borislav
> <Borislav.Petkov@amd.com>; Yuan, Perry <Perry.Yuan@amd.com>;
> Limonciello, Mario <Mario.Limonciello@amd.com>
> Cc: Deucher, Alexander <Alexander.Deucher@amd.com>; Huang, Shimmer
> <Shimmer.Huang@amd.com>; Du, Xiaojian <Xiaojian.Du@amd.com>; Meng,
> Li (Jassmine) <Li.Meng@amd.com>; linux-pm@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH v10 0/7] AMD Pstate Driver Core Performance Boost
>
> On čtvrtek 9. května 2024 0:13:49, SELČ Mario Limonciello wrote:
> > On 5/8/2024 16:31, Oleksandr Natalenko wrote:
> > > On středa 8. května 2024 21:21:39, SELČ Oleksandr Natalenko wrote:
> > >> On středa 8. května 2024 21:13:40, SELČ Oleksandr Natalenko wrote:
> > >>> On středa 8. května 2024 17:11:42, SELČ Oleksandr Natalenko wrote:
> > >>>> Hello.
> > >>>>
> > >>>> On středa 8. května 2024 9:21:05, SELČ Perry Yuan wrote:
> > >>>>> Hi all,
> > >>>>> The patchset series add core performance boost feature for AMD
> > >>>>> pstate driver including passisve ,guide and active mode support.
> > >>>>>
> > >>>>> User can change core frequency boost control with a new sysfs
> entry:
> > >>>>>
> > >>>>> "/sys/devices/system/cpu/amd_pstate/cpb_boost"
> > >>>>>
> > >>>>>
> > >>>>> 1) globally disable core boost:
> > >>>>> $ sudo bash -c "echo 0 >
> /sys/devices/system/cpu/amd_pstate/cpb_boost"
> > >>>>> $ lscpu -ae
> > >>>>> CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ
> MHZ
> > >>>>> 0 0 0 0 0:0:0:0 yes 4201.0000 400.0000 2983.578
> > >>>>> 1 0 0 1 1:1:1:0 yes 4201.0000 400.0000 2983.578
> > >>>>> 2 0 0 2 2:2:2:0 yes 4201.0000 400.0000 2583.855
> > >>>>> 3 0 0 3 3:3:3:0 yes 4201.0000 400.0000 2983.578
> > >>>>> 4 0 0 4 4:4:4:0 yes 4201.0000 400.0000 2983.578
> > >>>>>
> > >>>>> 2) globally enable core boost:
> > >>>>> $ sudo bash -c "echo 1 >
> /sys/devices/system/cpu/amd_pstate/cpb_boost"
> > >>>>> $ lscpu -ae
> > >>>>> 0 0 0 0 0:0:0:0 yes 5759.0000 400.0000 2983.578
> > >>>>> 1 0 0 1 1:1:1:0 yes 5759.0000 400.0000 2983.578
> > >>>>> 2 0 0 2 2:2:2:0 yes 5759.0000 400.0000 2983.578
> > >>>>> 3 0 0 3 3:3:3:0 yes 5759.0000 400.0000 2983.578
> > >>>>> 4 0 0 4 4:4:4:0 yes 5759.0000 400.0000 2983.578
> > >>>>>
> > >>>>>
> > >>>>>
> ==========================================================
> ======
> > >>>>> ============ The V9 patches add per CPU boost control, user can
> > >>>>> enable/disable CPUs boost as the below command tested on a
> > >>>>> laptop system.
> > >>>>> # before
> > >>>>> CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ
> MINMHZ MHZ
> > >>>>> 0 0 0 0 0:0:0:0 yes 4208.0000 400.0000 1666.7740
> > >>>>> 1 0 0 0 0:0:0:0 yes 4208.0000 400.0000 400.0000
> > >>>>> 2 0 0 1 1:1:1:0 yes 4208.0000 400.0000 3386.1260
> > >>>>> 3 0 0 1 1:1:1:0 yes 4208.0000 400.0000 400.0000
> > >>>>> $ sudo rdmsr 0xc00102b3 -p 0
> > >>>>> 10a6
> > >>>>>
> > >>>>> $ sudo bash -c "echo 1 >
> /sys/devices/system/cpu/cpu0/cpufreq/boost"
> > >>>>> # after
> > >>>>> CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ
> MINMHZ MHZ
> > >>>>> 0 0 0 0 0:0:0:0 yes 3501.0000 400.0000 400.0000
> > >>>>> 1 0 0 0 0:0:0:0 yes 4208.0000 400.0000 1391.0690
> > >>>>> 2 0 0 1 1:1:1:0 yes 4208.0000 400.0000 3654.4541
> > >>>>> 3 0 0 1 1:1:1:0 yes 4208.0000 400.0000 400.0000
> > >>>>> $ sudo rdmsr 0xc00102b3 -p 0
> > >>>>> 108a
> > >>>>>
> > >>>>>
> > >>>>> The patches have been tested with the AMD 7950X processor and
> > >>>>> many users would like to get core boost control enabled for power
> saving.
> > >>>>>
> > >>>>> Perry.
> > >>>>>
> > >>>>>
> > >>>>> Changes from v9:
> > >>>>> * change per CPU boost sysfs file name to `boost` (Mario)
> > >>>>> * rebased to latest linux-pm/bleeding-edge
> > >>>>>
> > >>>>> Changes from v8:
> > >>>>> * pick RB flag for patch 4 (Mario)
> > >>>>> * change boot_cpu_has to cpu_feature_enabled for patch 2 (Boris)
> > >>>>> * merge patch 6 into patch 3 (Mario)
> > >>>>> * add two patch for per CPU boost control patch 6 & 7(Mario)
> > >>>>> * rebased to latest linux-pm/bleeding-edge
> > >>>>>
> > >>>>> Changes from v7:
> > >>>>> * fix the mutext locking issue in the sysfs file update(Ray, Mario)
> > >>>>> * pick ack flag from Ray
> > >>>>> * use X86_FEATURE_CPB to verify the CPB function in Patch #2(Ray)
> > >>>>> * rerun the testing to check function works well
> > >>>>> * rebased to linux-pm/bleeding-edge latest
> > >>>>>
> > >>>>> Changes from v6:
> > >>>>> * reword patch 2 commit log (Gautham)
> > >>>>> * update cover letter description(Gautham)
> > >>>>> * rebase to kernel v6.9-rc5
> > >>>>>
> > >>>>> Changes from v4:
> > >>>>> * drop the legacy boost remove patch, let us keep the legacy
> interface
> > >>>>> in case some applications break.
> > >>>>> * rebase to linux-pm/bleeding-edge branch
> > >>>>> * rework the patchset base on [PATCH v8 0/8] AMD Pstate Fixes
> And
> > >>>>> Enhancements which has some intial work done there.
> > >>>>>
> > >>>>> Changes from v4:
> > >>>>> * move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
> > >>>>> * pick RB flag from Gautham R. Shenoy
> > >>>>> * add Cc Oleksandr Natalenko <oleksandr@natalenko.name>
> > >>>>> * rebase to latest linux-pm/bleeding-edge branch
> > >>>>> * rebase the patch set on top of [PATCH v7 0/6] AMD Pstate Fixes
> And Enhancements
> > >>>>> * update [PATCH v7 2/6] to use MSR_K7_HWCR_CPB_DIS_BIT
> > >>>>>
> > >>>>> Changes from v3:
> > >>>>> * rebased to linux-pm/bleeding-edge v6.8
> > >>>>> * rename global to amd_pstate_global_params(Oleksandr
> Natalenko)
> > >>>>> * remove comments for boot_supported in amd_pstate.h
> > >>>>> * fix the compiler warning for amd-pstate-ut.ko
> > >>>>> * use for_each_online_cpu in cpb_boost_store which fix the null
> pointer
> > >>>>> error during testing
> > >>>>> * fix the max frequency value to be KHz when cpb boost
> > >>>>> disabled(Gautham R. Shenoy)
> > >>>>>
> > >>>>> Changes from v2:
> > >>>>> * move global struct to amd-pstate.h
> > >>>>> * fix the amd-pstate-ut with new cpb control interface
> > >>>>>
> > >>>>> Changes from v1:
> > >>>>> * drop suspend/resume fix patch 6/7 because of the fix should be
> in
> > >>>>> another fix series instead of CPB feature
> > >>>>> * move the set_boost remove patch to the last(Mario)
> > >>>>> * Fix commit info with "Closes:" (Mario)
> > >>>>> * simplified global.cpb_supported initialization(Mario)
> > >>>>> * Add guide mode support for CPB control
> > >>>>> * Fixed some Doc typos and add guide mode info to Doc as well.
> > >>>>>
> > >>>>> v1:
> > >>>>> https://lore.kernel.org/all/cover.1706255676.git.perry.yuan@amd.
> > >>>>> com/
> > >>>>> v2:
> > >>>>> https://lore.kernel.org/lkml/cover.1707047943.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v3:
> > >>>>> https://lore.kernel.org/lkml/cover.1707297581.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v4:
> > >>>>> https://lore.kernel.org/lkml/cover.1710322310.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v5:
> > >>>>> https://lore.kernel.org/lkml/cover.1710473712.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v6:
> > >>>>> https://lore.kernel.org/lkml/cover.1710754236.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v7:
> > >>>>> https://lore.kernel.org/lkml/cover.1713861200.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v8:
> > >>>>> https://lore.kernel.org/lkml/cover.1714112854.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>> v9:
> > >>>>> https://lore.kernel.org/lkml/cover.1714989803.git.perry.yuan@amd
> > >>>>> .com/
> > >>>>>
> > >>>>> Perry Yuan (7):
> > >>>>> cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-
> index.h
> > >>>>> cpufreq: amd-pstate: initialize new core precision boost state
> > >>>>> cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost
> control
> > >>>>> cpufreq: amd-pstate: fix the MSR highest perf will be reset issue
> > >>>>> while cpb boost off
> > >>>>> Documentation: cpufreq: amd-pstate: introduce the new cpu
> boost
> > >>>>> control method
> > >>>>> cpufreq: amd-pstate: introduce per CPU frequency boost control
> > >>>>> Documentation: cpufreq: amd-pstate: update doc for Per CPU
> boost
> > >>>>> control method
> > >>>>>
> > >>>>> Documentation/admin-guide/pm/amd-pstate.rst | 30 ++++
> > >>>>> arch/x86/include/asm/msr-index.h | 2 +
> > >>>>> drivers/cpufreq/acpi-cpufreq.c | 2 -
> > >>>>> drivers/cpufreq/amd-pstate-ut.c | 2 +-
> > >>>>> drivers/cpufreq/amd-pstate.c | 189
> ++++++++++++++++++--
> > >>>>> include/linux/amd-pstate.h | 14 ++
> > >>>>> 6 files changed, 225 insertions(+), 14 deletions(-)
> > >>>>
> > >>>> I've applied this series along with fixes and improvements [1], and I
> cannot get guided mode to work with my CPU any more.
> > >>>>
> > >>>> The CPU is:
> > >>>>
> > >>>> ```
> > >>>> Vendor ID: AuthenticAMD
> > >>>> Model name: AMD Ryzen 9 5950X 16-Core Processor
> > >>>> CPU family: 25
> > >>>> Model: 33
> > >>>> Thread(s) per core: 2
> > >>>> Core(s) per socket: 16
> > >>>> Socket(s): 1
> > >>>> Stepping: 2
> > >>>> ```
> > >>>>
> > >>>> I've got `amd_pstate=guided` set in the kernel cmdline, but `amd-
> pstate-epp` gets loaded anyway.
> > >>>
> > >>> OK, this part is solved like below:
> > >>>
> > >>> ```
> > >>> diff --git a/drivers/cpufreq/amd-pstate.c
> > >>> b/drivers/cpufreq/amd-pstate.c index aafa4466e5ced..5aee7d2b8cfd7
> > >>> 100644
> > >>> --- a/drivers/cpufreq/amd-pstate.c
> > >>> +++ b/drivers/cpufreq/amd-pstate.c
> > >>> @@ -66,7 +66,7 @@
> > >>> static struct cpufreq_driver *current_pstate_driver;
> > >>> static struct cpufreq_driver amd_pstate_driver;
> > >>> static struct cpufreq_driver amd_pstate_epp_driver; -static int
> > >>> cppc_state;
> > >>> +static int cppc_state = CONFIG_X86_AMD_PSTATE_DEFAULT_MODE;
> > >>> static bool cppc_enabled;
> > >>> static bool amd_pstate_prefcore = true;
> > >>> static struct quirk_entry *quirks; @@ -1958,10 +1958,6 @@ static
> > >>> int __init amd_pstate_init(void)
> > >>> /* check if this machine need CPPC quirks */
> > >>> dmi_check_system(amd_pstate_quirks_table);
> > >>>
> > >>> - /* get default driver mode for loading*/
> > >>> - cppc_state = CONFIG_X86_AMD_PSTATE_DEFAULT_MODE;
> > >>> - pr_debug("cppc working state set to mode:%d\n", cppc_state);
> > >>> -
> > >>> switch (cppc_state) {
> > >>> case AMD_PSTATE_DISABLE:
> > >>> pr_info("driver load is disabled, boot with specific mode to
> > >>> enable this\n"); ```
> > >>>
> > >>> as we have discussed here [1].
> > >>>
> > >>> [1]
> > >>>
> https://lore.kernel.org/lkml/CYYPR12MB865554562BE018D46FF0108C9CE5
> > >>> 2@CYYPR12MB8655.namprd12.prod.outlook.com/
> > >>
> > >> Ah no, scratch it, it's not solved. With `amd_pstate=guided` the driver
> fails to register during the boottime with the same `sysfs` error:
> > >>
> > >> ```
> > >> kernel: sysfs: cannot create duplicate filename
> '/devices/system/cpu/cpufreq/policy0/boost'
> > >> kernel: Hardware name: ASUS System Product Name/Pro WS X570-ACE,
> > >> BIOS 4805 03/18/2024
> > >> kernel: Call Trace:
> > >> kernel: <TASK>
> > >> kernel: dump_stack_lvl+0x47/0x60
> > >> kernel: sysfs_warn_dup+0x5a/0x70
> > >> kernel: sysfs_create_file_ns+0x196/0x1b0
> > >> kernel: cpufreq_online+0x244/0xde0
> > >> kernel: cpufreq_add_dev+0x7b/0x90
> > >> kernel: subsys_interface_register+0x19e/0x1d0
> > >> kernel: cpufreq_register_driver+0x177/0x2f0
> > >> kernel: amd_pstate_init+0x1b8/0x2c0
> > >> kernel: do_one_initcall+0x5b/0x320
> > >> kernel: kernel_init_freeable+0x1dc/0x380
> > >> kernel: kernel_init+0x1a/0x1c0
> > >> kernel: ret_from_fork+0x34/0x50
> > >> kernel: ret_from_fork_asm+0x1b/0x30
> > >> kernel: </TASK>
> > >> ```
> > >>
> > >> and things revert to `acpi_cpufreq` instead.
> > >>
> > >> What's wrong?
> > >
> > > This happens with both `amd_pstate=guided` and `amd_pstate=passive`,
> while with `amd_pstate=active` it works. Also note I've got:
> > >
> > > ```
> > > CONFIG_X86_AMD_PSTATE=y
> > > CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
> > > ```
> > >
> > > aka "active" by default.
> > >
> > > It seems I miss to understand something in the init sequence.
> > >
> >
> > I think what's going on is that by reusing the same name as acpi_cppc
> > does for sysfs when amd pstate is changing modes the sysfs file from
> > amd-pstate isn't cleared and so acpi_cppc tries to make it.
>
> Seems so. I've renamed `amd_pstate`'s `boost` file to `amd_pstate_boost`,
> and now I'm able to boot with `amd_pstate=guided`, and after boot under
> `/sys/devices/system/cpu/cpufreq/policyX` I see both `boost` (from
> `acpi_cppc`, apparently) and `amd_pstate_boost` at the same time.
>
> Not sure the fact both files are present is as intended.
>
> >
> > Don't get me wrong - I do think that we should keep the same sysfs
> > name for both, it's easier for users.
> >
> > But if we're going to keep mode switching from amd-pstate at runtime
> > we really need to make sure that amd-pstate-ut explicitly tests all
> > these combinations to catch these types of problems.
>
> Not sure it's runtime switching only that is affected. I guess having
> `CONFIG_X86_AMD_PSTATE_DEFAULT_MODE` set to `active` and then
> having `amd_pstate=guided` on the kernel cmdline is not considered to be a
> runtime switching (or is it?), yet it doesn't work either due to filename
> conflict.
>
> > >>
> > >>>
> > >>> But this part:
> > >>>
> > >>>> When I try to set `guided` manually via `echo guided | sudo tee
> /sys/devices/system/cpu/amd_pstate/status`, the status gets dropped to
> `disable`, `tee` errors out with `-ENODEV`, and there's this in the kernel log:
> > >>>>
> > >>>> ```
> > >>>> $ jctl -kb | grep sysfs: | cut -d ' ' -f 5-
> > >>>> kernel: sysfs: cannot create duplicate filename
> '/devices/system/cpu/cpufreq/policy0/boost'
> > >>>> …
> > >>>> kernel: sysfs: cannot create duplicate filename
> '/devices/system/cpu/cpufreq/policy31/boost'
> > >>>> ```
> > >>>
> > >>> is not. I've successfully booted with `amd_pstate=guided`, then did
> this:
> > >>>
> > >>> ```
> > >>> $ echo active | sudo tee /sys/devices/system/cpu/amd_pstate/status
> > >>> ```
> > >>>
> > >>> just for the sake of test, and got this:
> > >>>
> > >>> ```
> > >>> tee: /sys/devices/system/cpu/amd_pstate/status: File exists ```
> > >>>
> > >>> and this:
> > >>>
> > >>> ```
> > >>> kernel: WARNING: CPU: 9 PID: 8528 at
> > >>> drivers/cpufreq/cpufreq.c:2961 cpufreq_unregister_driver+0x1a/0xc0
> > >>> ```
> > >>>
> > >>> which corresponds to:
> > >>>
> > >>> ```
> > >>> 2957 void cpufreq_unregister_driver(struct cpufreq_driver *driver)
> > >>> 2958 {
> > >>> 2959 unsigned long flags;
> > >>> 2960
> > >>> 2961 if (WARN_ON(!cpufreq_driver || (driver != cpufreq_driver)))
> > >>> 2962 return;
> > >>> ```
> > >>>
> > >>> I haven't conducted this test before, so I don't know whether this
> behaviour is new, or it was present in older iterations. I also don't know if this
> belongs to the "boost" series or the "fixes", and just letting you know so that
> you can test the runtime switching yourself and see if it is reproducible in
> your environment as well or not.
> > >>>
> > >>>> The following is applied on top of v6.9-rc7:
> > >>>>
> > >>>> ```
> > >>>> cpufreq: amd-pstate: automatically load pstate driver by default
> > >>>> cpufreq: amd-pstate: fix the highest frequency issue which limit
> > >>>> performance
> > >>>> cpufreq: amd-pstate: implement heterogeneous core topology for
> > >>>> highest performance initialization
> > >>>> x86/cpufeatures: Add feature bits for AMD heterogeneous processor
> > >>>> cpufreq: amd-pstate: switch boot_cpu_has() to
> > >>>> cpu_feature_enabled()
> > >>>> Documentation: PM: amd-pstate: add guide mode to the Operation
> > >>>> mode
> > >>>> Documentation: PM: amd-pstate: add debugging section for driver
> > >>>> loading failure
> > >>>> Documentation: PM: amd-pstate: introducing recommended reboot
> > >>>> requirement during driver switch
> > >>>> cpufreq: amd-pstate: add debug message while CPPC is supported
> > >>>> and disabled by SBIOS
> > >>>> cpufreq: amd-pstate: show CPPC debug message if CPPC is not
> > >>>> supported
> > >>>> cpufreq: amd-pstate: optimiza the initial frequency values
> > >>>> verification
> > >>>> Documentation: cpufreq: amd-pstate: update doc for Per CPU boost
> > >>>> control method
> > >>>> cpufreq: amd-pstate: introduce per CPU frequency boost control
> > >>>> Documentation: cpufreq: amd-pstate: introduce the new cpu boost
> > >>>> control method
> > >>>> cpufreq: amd-pstate: fix the MSR highest perf will be reset issue
> > >>>> while cpb boost off
> > >>>> cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost
> > >>>> control
> > >>>> cpufreq: amd-pstate: initialize new core precision boost state
> > >>>> cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
> > >>>> cpufreq: amd-pstate: remove unused variable
> lowest_nonlinear_freq
> > >>>> cpufreq: amd-pstate: fix code format problems
> > >>>> cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities
> > >>>> missing
> > >>>> cpufreq: amd-pstate: get transition delay and latency value from
> > >>>> ACPI tables
> > >>>> cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
> > >>>> cpufreq: amd-pstate: Remove
> > >>>> amd_get_{min,max,nominal,lowest_nonlinear}_freq()
> > >>>> cpufreq: amd-pstate: Unify computation of
> > >>>> {max,min,nominal,lowest_nonlinear}_freq
> > >>>> cpufreq: amd-pstate: Document the units for freq variables in
> > >>>> amd_cpudata
> > >>>> cpufreq: amd-pstate: Document *_limit_* fields in struct
> > >>>> amd_cpudata ```
> > >>>>
> > >>>> Previously, with your submissions, it was possible to use `guided`
> mode with my Zen 3.
> > >>>>
> > >>>> [1]
> > >>>> https://lore.kernel.org/lkml/cover.1715065568.git.perry.yuan@amd.
> > >>>> com/
> > >>>>
> > >>>>
> > >>>
> > >>>
> > >>>
> > >>
> > >>
> > >>
> > >
> > >
> >
> >
>
>
> --
> Oleksandr Natalenko (post-factum)
I have known the issue detail, will fix it to allow kernel command input like before.
Perry.
prev parent reply other threads:[~2024-05-09 16:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-08 7:21 [PATCH v10 0/7] AMD Pstate Driver Core Performance Boost Perry Yuan
2024-05-08 7:21 ` [PATCH v10 1/7] cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h Perry Yuan
2024-05-08 7:21 ` [PATCH v10 2/7] cpufreq: amd-pstate: initialize new core precision boost state Perry Yuan
2024-05-08 7:21 ` [PATCH v10 3/7] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control Perry Yuan
2024-05-08 9:39 ` Oleksandr Natalenko
2024-05-08 11:42 ` Yuan, Perry
2024-05-08 7:21 ` [PATCH v10 4/7] cpufreq: amd-pstate: fix the MSR highest perf will be reset issue while cpb boost off Perry Yuan
2024-05-08 7:21 ` [PATCH v10 5/7] Documentation: cpufreq: amd-pstate: introduce the new cpu boost control method Perry Yuan
2024-05-08 7:21 ` [PATCH v10 6/7] cpufreq: amd-pstate: introduce per CPU frequency boost control Perry Yuan
2024-05-08 9:34 ` Oleksandr Natalenko
2024-05-08 9:43 ` Oleksandr Natalenko
2024-05-08 12:20 ` Yuan, Perry
2024-05-08 7:21 ` [PATCH v10 7/7] Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method Perry Yuan
2024-05-08 8:18 ` [PATCH v10 0/7] AMD Pstate Driver Core Performance Boost Borislav Petkov
2024-05-09 16:01 ` Yuan, Perry
2024-05-09 16:12 ` Borislav Petkov
2024-05-08 15:11 ` Oleksandr Natalenko
2024-05-08 19:13 ` Oleksandr Natalenko
2024-05-08 19:21 ` Oleksandr Natalenko
2024-05-08 21:31 ` Oleksandr Natalenko
2024-05-08 22:13 ` Mario Limonciello
2024-05-09 12:01 ` Oleksandr Natalenko
2024-05-09 16:03 ` Yuan, Perry [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CYYPR12MB86555D37D70EC0C4CB6A995E9CE62@CYYPR12MB8655.namprd12.prod.outlook.com \
--to=perry.yuan@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Li.Meng@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Ray.Huang@amd.com \
--cc=Shimmer.Huang@amd.com \
--cc=Xiaojian.Du@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=oleksandr@natalenko.name \
--cc=rafael.j.wysocki@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).