From: Dharma Balasubiramani <dharma.b@microchip.com>
To: <sam@ravnborg.org>, <bbrezillon@kernel.org>,
<maarten.lankhorst@linux.intel.com>, <mripard@kernel.org>,
<tzimmermann@suse.de>, <airlied@gmail.com>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@tuxon.dev>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <lee@kernel.org>,
<thierry.reding@gmail.com>, <u.kleine-koenig@pengutronix.de>,
<linux-pwm@vger.kernel.org>
Cc: Dharma Balasubiramani <dharma.b@microchip.com>
Subject: [PATCH 2/3] dt-bindings: mfd: atmel,hlcdc: Convert to DT schema format
Date: Wed, 10 Jan 2024 15:55:34 +0530 [thread overview]
Message-ID: <20240110102535.246177-3-dharma.b@microchip.com> (raw)
In-Reply-To: <20240110102535.246177-1-dharma.b@microchip.com>
Convert the atmel,hlcdc binding to DT schema format.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
---
.../devicetree/bindings/mfd/atmel,hlcdc.yaml | 106 ++++++++++++++++++
.../devicetree/bindings/mfd/atmel-hlcdc.txt | 56 ---------
2 files changed, 106 insertions(+), 56 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 000000000000..555d6faa9104
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2024 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCDC (High LCD Controller) MFD driver
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description: |
+ Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver.
+ The HLCDC IP exposes two subdevices:
+ # a PWM chip: see ../pwm/atmel,hlcdc-pwm.yaml
+ # a Display Controller: see ../display/atmel/atmel,hlcdc-dc.yaml
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9n12-hlcdc
+ - atmel,at91sam9x5-hlcdc
+ - atmel,sama5d2-hlcdc
+ - atmel,sama5d3-hlcdc
+ - atmel,sama5d4-hlcdc
+ - microchip,sam9x60-hlcdc
+ - microchip,sam9x75-xlcdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ anyOf:
+ - items:
+ - enum:
+ - sys_clk
+ - lvds_pll_clk
+ - contains:
+ const: periph_clk
+ - contains:
+ const: slow_clk
+ maxItems: 3
+
+ hlcdc-display-controller:
+ $ref: /schemas/display/atmel/atmel,hlcdc-dc.yaml
+
+ hlcdc-pwm:
+ $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696eefaed..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
- "atmel,at91sam9n12-hlcdc"
- "atmel,at91sam9x5-hlcdc"
- "atmel,sama5d2-hlcdc"
- "atmel,sama5d3-hlcdc"
- "atmel,sama5d4-hlcdc"
- "microchip,sam9x60-hlcdc"
- "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
- Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
--
2.25.1
next prev parent reply other threads:[~2024-01-10 10:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-10 10:25 [PATCH 0/3] Convert Microchip's HLCDC Text based DT bindings to JSON schema Dharma Balasubiramani
2024-01-10 10:25 ` [PATCH 1/3] dt-bindings: display: convert Atmel's HLCDC to DT schema Dharma Balasubiramani
2024-01-10 10:39 ` Krzysztof Kozlowski
2024-01-17 1:58 ` Dharma.B
2024-01-10 11:57 ` Rob Herring
2024-01-17 2:01 ` Dharma.B
2024-01-10 10:25 ` Dharma Balasubiramani [this message]
2024-01-10 11:57 ` [PATCH 2/3] dt-bindings: mfd: atmel,hlcdc: Convert to DT schema format Rob Herring
2024-01-10 18:01 ` Krzysztof Kozlowski
2024-01-17 2:22 ` Dharma.B
2024-01-17 7:37 ` Krzysztof Kozlowski
2024-01-18 5:50 ` Dharma.B
2024-01-18 9:07 ` Dharma.B
2024-01-10 10:25 ` [PATCH 3/3] dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema Dharma Balasubiramani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240110102535.246177-3-dharma.b@microchip.com \
--to=dharma.b@microchip.com \
--cc=airlied@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bbrezillon@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).