From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Jens Wiklander <jens.wiklander@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<op-tee@lists.trustedfirmware.org>, <devicetree@vger.kernel.org>,
Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Subject: [PATCH v7 3/5] dt-bindings: remoteproc: Add compatibility for TEE support
Date: Tue, 11 Jun 2024 09:39:02 +0200 [thread overview]
Message-ID: <20240611073904.475019-4-arnaud.pouliquen@foss.st.com> (raw)
In-Reply-To: <20240611073904.475019-1-arnaud.pouliquen@foss.st.com>
The "st,stm32mp1-m4-tee" compatible is utilized in a system configuration
where the Cortex-M4 firmware is loaded by the Trusted Execution Environment
(TEE).
For instance, this compatible is used in both the Linux and OP-TEE device
trees:
- In OP-TEE, a node is defined in the device tree with the
"st,stm32mp1-m4-tee" compatible to support signed remoteproc firmware.
Based on DT properties, the OP-TEE remoteproc framework is initiated to
expose a trusted application service to authenticate and load the remote
processor firmware provided by the Linux remoteproc framework, as well
as to start and stop the remote processor.
- In Linux, when the compatibility is set, the Cortex-M resets should not
be declared in the device tree. In such a configuration, the reset is
managed by the OP-TEE remoteproc driver and is no longer accessible from
the Linux kernel.
Associated with this new compatible, add the "st,proc-id" property to
identify the remote processor. This ID is used to define a unique ID,
common between Linux, U-Boot, and OP-TEE, to identify a coprocessor.
This ID will be used in requests to the OP-TEE remoteproc Trusted
Application to specify the remote processor.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
update vs V6:
Add Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
update vs V5
- merge [PATCH v5 4/7] remoteproc: core introduce rproc_set_rsc_table_on_start function
as new "st,proc-id" is associated to "st,stm32mp1-m4-tee" compatible
- update commit message
- remove Reviewed-by: Rob Herring <robh@kernel.org> as patch is updated
---
.../bindings/remoteproc/st,stm32-rproc.yaml | 58 ++++++++++++++++---
1 file changed, 50 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 370af61d8f28..409123cd4667 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -16,7 +16,12 @@ maintainers:
properties:
compatible:
- const: st,stm32mp1-m4
+ enum:
+ - st,stm32mp1-m4
+ - st,stm32mp1-m4-tee
+ description:
+ Use "st,stm32mp1-m4" for the Cortex-M4 coprocessor management by non-secure context
+ Use "st,stm32mp1-m4-tee" for the Cortex-M4 coprocessor management by secure context
reg:
description:
@@ -43,6 +48,10 @@ properties:
- description: The offset of the hold boot setting register
- description: The field mask of the hold boot
+ st,proc-id:
+ description: remote processor identifier
+ $ref: /schemas/types.yaml#/definitions/uint32
+
st,syscfg-tz:
deprecated: true
description:
@@ -142,21 +151,43 @@ properties:
required:
- compatible
- reg
- - resets
allOf:
- if:
properties:
- reset-names:
- not:
- contains:
- const: hold_boot
+ compatible:
+ contains:
+ const: st,stm32mp1-m4
then:
+ if:
+ properties:
+ reset-names:
+ not:
+ contains:
+ const: hold_boot
+ then:
+ required:
+ - st,syscfg-holdboot
+ else:
+ properties:
+ st,syscfg-holdboot: false
+ required:
+ - reset-names
required:
- - st,syscfg-holdboot
- else:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: st,stm32mp1-m4-tee
+ then:
properties:
st,syscfg-holdboot: false
+ reset-names: false
+ resets: false
+ required:
+ - st,proc-id
additionalProperties: false
@@ -188,5 +219,16 @@ examples:
st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
};
+ - |
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ m4@10000000 {
+ compatible = "st,stm32mp1-m4-tee";
+ reg = <0x10000000 0x40000>,
+ <0x30000000 0x40000>,
+ <0x38000000 0x10000>;
+ st,proc-id = <0>;
+ st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+ st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+ };
...
--
2.25.1
next prev parent reply other threads:[~2024-06-11 7:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 7:38 [PATCH v7 0/5] Introduction of a remoteproc tee to load signed firmware Arnaud Pouliquen
2024-06-11 7:39 ` [PATCH v7 1/5] remoteproc: core: Introduce rproc_pa_to_va helper Arnaud Pouliquen
2024-06-20 21:28 ` Mathieu Poirier
2024-06-11 7:39 ` [PATCH v7 2/5] remoteproc: Add TEE support Arnaud Pouliquen
2024-06-19 15:41 ` Mathieu Poirier
2024-06-19 16:33 ` Arnaud POULIQUEN
2024-06-20 21:24 ` Mathieu Poirier
2024-06-20 20:27 ` Mathieu Poirier
2024-06-11 7:39 ` Arnaud Pouliquen [this message]
2024-06-11 7:39 ` [PATCH v7 4/5] remoteproc: stm32: Create sub-functions to request shutdown and release Arnaud Pouliquen
2024-06-11 7:39 ` [PATCH v7 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware Arnaud Pouliquen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240611073904.475019-4-arnaud.pouliquen@foss.st.com \
--to=arnaud.pouliquen@foss.st.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jens.wiklander@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mathieu.poirier@linaro.org \
--cc=op-tee@lists.trustedfirmware.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).