From: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>,
<linux-remoteproc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v15 3/8] remoteproc: Introduce load_fw and release_fw optional operation
Date: Thu, 28 Nov 2024 09:42:10 +0100 [thread overview]
Message-ID: <20241128084219.2159197-4-arnaud.pouliquen@foss.st.com> (raw)
In-Reply-To: <20241128084219.2159197-1-arnaud.pouliquen@foss.st.com>
This patch updates the rproc_ops structures to include two new optional
operations.
- The load_fw() op is responsible for loading the remote processor
non-ELF firmware image before starting the boot sequence. This ops will
be used, for instance, to call OP-TEE to authenticate an load the firmware
image before accessing to its resources (a.e the resource table)
- The release_fw op is responsible for releasing the remote processor
firmware image. For instance to clean memories.
The ops is called in the following cases:
- An error occurs between the loading of the firmware image and the
start of the remote processor.
- after stopping the remote processor.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
Update vs version V13:
- Rework the commit to introduce load_fw() op.
- remove rproc_release_fw() call from rproc_start() as called in
rproc_boot() and rproc_boot_recovery() in case of error.
- create rproc_load_fw() and rproc_release_fw() internal functions.
---
drivers/remoteproc/remoteproc_core.c | 16 +++++++++++++++-
drivers/remoteproc/remoteproc_internal.h | 14 ++++++++++++++
include/linux/remoteproc.h | 6 ++++++
3 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index ace11ea17097..8df4b2c59bb6 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1488,6 +1488,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
kfree(rproc->cached_table);
rproc->cached_table = NULL;
rproc->table_ptr = NULL;
+ rproc_release_fw(rproc);
unprepare_rproc:
/* release HW resources if needed */
rproc_unprepare_device(rproc);
@@ -1855,8 +1856,14 @@ static int rproc_boot_recovery(struct rproc *rproc)
return ret;
}
+ ret = rproc_load_fw(rproc, firmware_p);
+ if (ret)
+ return ret;
+
/* boot the remote processor up again */
ret = rproc_start(rproc, firmware_p);
+ if (ret)
+ rproc_release_fw(rproc);
release_firmware(firmware_p);
@@ -1997,7 +2004,13 @@ int rproc_boot(struct rproc *rproc)
goto downref_rproc;
}
+ ret = rproc_load_fw(rproc, firmware_p);
+ if (ret)
+ goto downref_rproc;
+
ret = rproc_fw_boot(rproc, firmware_p);
+ if (ret)
+ rproc_release_fw(rproc);
release_firmware(firmware_p);
}
@@ -2071,6 +2084,7 @@ int rproc_shutdown(struct rproc *rproc)
kfree(rproc->cached_table);
rproc->cached_table = NULL;
rproc->table_ptr = NULL;
+ rproc_release_fw(rproc);
out:
mutex_unlock(&rproc->lock);
return ret;
@@ -2471,7 +2485,7 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
if (!rproc->ops->coredump)
rproc->ops->coredump = rproc_coredump;
- if (rproc->ops->load)
+ if (rproc->ops->load || rproc->ops->load_fw)
return 0;
/* Default to ELF loader if no load function is specified */
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 0cd09e67ac14..2104ca449178 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -221,4 +221,18 @@ bool rproc_u64_fit_in_size_t(u64 val)
return (val <= (size_t) -1);
}
+static inline void rproc_release_fw(struct rproc *rproc)
+{
+ if (rproc->ops->release_fw)
+ rproc->ops->release_fw(rproc);
+}
+
+static inline int rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
+{
+ if (rproc->ops->load_fw)
+ return rproc->ops->load_fw(rproc, fw);
+
+ return 0;
+}
+
#endif /* REMOTEPROC_INTERNAL_H */
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 2e0ddcb2d792..ba6fd560f7ba 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -381,6 +381,10 @@ enum rsc_handling_status {
* @panic: optional callback to react to system panic, core will delay
* panic at least the returned number of milliseconds
* @coredump: collect firmware dump after the subsystem is shutdown
+ * @load_fw: optional function to load non-ELF firmware image to memory, where the remote
+ * processor expects to find it.
+ * @release_fw: optional function to release the firmware image from memories.
+ * This function is called after stopping the remote processor or in case of error
*/
struct rproc_ops {
int (*prepare)(struct rproc *rproc);
@@ -403,6 +407,8 @@ struct rproc_ops {
u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
unsigned long (*panic)(struct rproc *rproc);
void (*coredump)(struct rproc *rproc);
+ int (*load_fw)(struct rproc *rproc, const struct firmware *fw);
+ void (*release_fw)(struct rproc *rproc);
};
/**
--
2.25.1
next prev parent reply other threads:[~2024-11-28 8:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-28 8:42 [PATCH v15 0/8] Introduction of a remoteproc tee to load signed firmware Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 1/8] remoteproc: core: Introduce rproc_pa_to_va helper Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 2/8] remoteproc: Add TEE support Arnaud Pouliquen
2024-12-03 17:04 ` Mathieu Poirier
2024-12-06 22:07 ` Bjorn Andersson
2024-12-10 8:57 ` Arnaud POULIQUEN
2025-01-10 8:51 ` Arnaud POULIQUEN
2025-02-12 3:18 ` Bjorn Andersson
2025-02-12 13:42 ` Arnaud POULIQUEN
2025-03-04 15:58 ` Bjorn Andersson
2025-03-05 12:48 ` Arnaud POULIQUEN
2025-03-25 11:05 ` Arnaud POULIQUEN
2024-11-28 8:42 ` Arnaud Pouliquen [this message]
2024-12-03 17:22 ` [PATCH v15 3/8] remoteproc: Introduce load_fw and release_fw optional operation Mathieu Poirier
2024-12-05 18:20 ` Arnaud POULIQUEN
2024-12-06 17:05 ` Mathieu Poirier
2024-12-06 17:07 ` Mathieu Poirier
2024-12-06 18:09 ` Arnaud POULIQUEN
2024-12-04 17:39 ` Mathieu Poirier
2024-12-09 23:14 ` Bjorn Andersson
2024-12-10 10:33 ` Arnaud POULIQUEN
2025-02-12 3:54 ` Bjorn Andersson
2025-02-12 13:48 ` Arnaud POULIQUEN
2025-03-04 15:23 ` Bjorn Andersson
2025-03-05 12:50 ` Arnaud POULIQUEN
2024-11-28 8:42 ` [PATCH v15 4/8] remoteproc: Rename load() operation to load_segments() in rproc_ops struct Arnaud Pouliquen
2024-12-04 18:02 ` Mathieu Poirier
2024-11-28 8:42 ` [PATCH v15 5/8] remoteproc: Make load_segments and load_fw ops exclusive and optional Arnaud Pouliquen
2024-12-04 17:53 ` Mathieu Poirier
2024-11-28 8:42 ` [PATCH v15 6/8] dt-bindings: remoteproc: Add compatibility for TEE support Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 7/8] remoteproc: stm32: Create sub-functions to request shutdown and release Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 8/8] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware Arnaud Pouliquen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241128084219.2159197-4-arnaud.pouliquen@foss.st.com \
--to=arnaud.pouliquen@foss.st.com \
--cc=andersson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).