From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v15 3/8] remoteproc: Introduce load_fw and release_fw optional operation
Date: Fri, 6 Dec 2024 10:05:47 -0700 [thread overview]
Message-ID: <CANLsYkxk0NdKmbzOPEcVHbVpW9hPEz0gS-+9PysWMULDMxbkxw@mail.gmail.com> (raw)
In-Reply-To: <1b7c8c21-37bc-4a1a-91bb-1d736d900f00@foss.st.com>
On Thu, 5 Dec 2024 at 11:22, Arnaud POULIQUEN
<arnaud.pouliquen@foss.st.com> wrote:
>
> Hello Mathieu,
>
> Thanks for the review!
> I just need to clarify a point below before preparing the next revision.
>
> On 12/3/24 18:22, Mathieu Poirier wrote:
> > On Thu, Nov 28, 2024 at 09:42:10AM +0100, Arnaud Pouliquen wrote:
> >> This patch updates the rproc_ops structures to include two new optional
> >> operations.
> >>
> >> - The load_fw() op is responsible for loading the remote processor
> >> non-ELF firmware image before starting the boot sequence. This ops will
> >> be used, for instance, to call OP-TEE to authenticate an load the firmware
> >> image before accessing to its resources (a.e the resource table)
> >>
> >> - The release_fw op is responsible for releasing the remote processor
> >> firmware image. For instance to clean memories.
> >> The ops is called in the following cases:
> >> - An error occurs between the loading of the firmware image and the
> >> start of the remote processor.
> >> - after stopping the remote processor.
> >>
> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> >> ---
> >> Update vs version V13:
> >> - Rework the commit to introduce load_fw() op.
> >> - remove rproc_release_fw() call from rproc_start() as called in
> >> rproc_boot() and rproc_boot_recovery() in case of error.
> >> - create rproc_load_fw() and rproc_release_fw() internal functions.
> >> ---
> >> drivers/remoteproc/remoteproc_core.c | 16 +++++++++++++++-
> >> drivers/remoteproc/remoteproc_internal.h | 14 ++++++++++++++
> >> include/linux/remoteproc.h | 6 ++++++
> >> 3 files changed, 35 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> >> index ace11ea17097..8df4b2c59bb6 100644
> >> --- a/drivers/remoteproc/remoteproc_core.c
> >> +++ b/drivers/remoteproc/remoteproc_core.c
> >> @@ -1488,6 +1488,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
> >> kfree(rproc->cached_table);
> >> rproc->cached_table = NULL;
> >> rproc->table_ptr = NULL;
> >> + rproc_release_fw(rproc);
> >
> > This is not needed since rproc_release_fw() is called in rproc_boot().
> >
> >> unprepare_rproc:
> >> /* release HW resources if needed */
> >> rproc_unprepare_device(rproc);
> >> @@ -1855,8 +1856,14 @@ static int rproc_boot_recovery(struct rproc *rproc)
> >> return ret;
> >> }
> >>
> >> + ret = rproc_load_fw(rproc, firmware_p);
> >> + if (ret)
> >> + return ret;
> >> +
> >> /* boot the remote processor up again */
> >> ret = rproc_start(rproc, firmware_p);
> >> + if (ret)
> >> + rproc_release_fw(rproc);
> >>
> >> release_firmware(firmware_p);
> >>
> >> @@ -1997,7 +2004,13 @@ int rproc_boot(struct rproc *rproc)
> >> goto downref_rproc;
> >> }
> >>
> >> + ret = rproc_load_fw(rproc, firmware_p);
> >> + if (ret)
> >> + goto downref_rproc;
> >
> > In case of error the firmware is not released.
>
> I considered that if the load fails, the firmware is not loaded
> and therefore does not need to be released.
> In other words, in case of a load error in OP-TEE, OP-TEE should
> perform the cleanup to return to its initial state before the load.
>
> Do you see a use case where we should force the release in Linux?
> Otherwise, I would propose to implement this behavior later if needed.
>
I'm talking about release_firmware() - it is not called if
rproc_load_fw(), and it needs to.
> Thanks,
> Arnaud
>
> >
> >> +
> >> ret = rproc_fw_boot(rproc, firmware_p);
> >> + if (ret)
> >> + rproc_release_fw(rproc);
> >>
> >> release_firmware(firmware_p);
> >> }
> >> @@ -2071,6 +2084,7 @@ int rproc_shutdown(struct rproc *rproc)
> >> kfree(rproc->cached_table);
> >> rproc->cached_table = NULL;
> >> rproc->table_ptr = NULL;
> >> + rproc_release_fw(rproc);
> >
> > Please move this after rproc_disable_iommu().
> >
> >
> >> out:
> >> mutex_unlock(&rproc->lock);
> >> return ret;
> >> @@ -2471,7 +2485,7 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops)
> >> if (!rproc->ops->coredump)
> >> rproc->ops->coredump = rproc_coredump;
> >>
> >> - if (rproc->ops->load)
> >> + if (rproc->ops->load || rproc->ops->load_fw)
> >> return 0;
> >>
> >> /* Default to ELF loader if no load function is specified */
> >> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> >> index 0cd09e67ac14..2104ca449178 100644
> >> --- a/drivers/remoteproc/remoteproc_internal.h
> >> +++ b/drivers/remoteproc/remoteproc_internal.h
> >> @@ -221,4 +221,18 @@ bool rproc_u64_fit_in_size_t(u64 val)
> >> return (val <= (size_t) -1);
> >> }
> >>
> >> +static inline void rproc_release_fw(struct rproc *rproc)
> >> +{
> >> + if (rproc->ops->release_fw)
> >> + rproc->ops->release_fw(rproc);
> >> +}
> >> +
> >> +static inline int rproc_load_fw(struct rproc *rproc, const struct firmware *fw)
> >> +{
> >> + if (rproc->ops->load_fw)
> >> + return rproc->ops->load_fw(rproc, fw);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> #endif /* REMOTEPROC_INTERNAL_H */
> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> index 2e0ddcb2d792..ba6fd560f7ba 100644
> >> --- a/include/linux/remoteproc.h
> >> +++ b/include/linux/remoteproc.h
> >> @@ -381,6 +381,10 @@ enum rsc_handling_status {
> >> * @panic: optional callback to react to system panic, core will delay
> >> * panic at least the returned number of milliseconds
> >> * @coredump: collect firmware dump after the subsystem is shutdown
> >> + * @load_fw: optional function to load non-ELF firmware image to memory, where the remote
> >
> > Round this down to 80 characters please. Here having a longer line doesn't
> > improve readability.
> >
> >> + * processor expects to find it.
> >> + * @release_fw: optional function to release the firmware image from memories.
> >> + * This function is called after stopping the remote processor or in case of error
> >
> > Same.
> >
> > More comments tomorrow or later during the week.
> >
> > Thanks,
> > Mathieu
> >
> >> */
> >> struct rproc_ops {
> >> int (*prepare)(struct rproc *rproc);
> >> @@ -403,6 +407,8 @@ struct rproc_ops {
> >> u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> >> unsigned long (*panic)(struct rproc *rproc);
> >> void (*coredump)(struct rproc *rproc);
> >> + int (*load_fw)(struct rproc *rproc, const struct firmware *fw);
> >> + void (*release_fw)(struct rproc *rproc);
> >> };
> >>
> >> /**
> >> --
> >> 2.25.1
> >>
next prev parent reply other threads:[~2024-12-06 17:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-28 8:42 [PATCH v15 0/8] Introduction of a remoteproc tee to load signed firmware Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 1/8] remoteproc: core: Introduce rproc_pa_to_va helper Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 2/8] remoteproc: Add TEE support Arnaud Pouliquen
2024-12-03 17:04 ` Mathieu Poirier
2024-12-06 22:07 ` Bjorn Andersson
2024-12-10 8:57 ` Arnaud POULIQUEN
2025-01-10 8:51 ` Arnaud POULIQUEN
2025-02-12 3:18 ` Bjorn Andersson
2025-02-12 13:42 ` Arnaud POULIQUEN
2025-03-04 15:58 ` Bjorn Andersson
2025-03-05 12:48 ` Arnaud POULIQUEN
2025-03-25 11:05 ` Arnaud POULIQUEN
2024-11-28 8:42 ` [PATCH v15 3/8] remoteproc: Introduce load_fw and release_fw optional operation Arnaud Pouliquen
2024-12-03 17:22 ` Mathieu Poirier
2024-12-05 18:20 ` Arnaud POULIQUEN
2024-12-06 17:05 ` Mathieu Poirier [this message]
2024-12-06 17:07 ` Mathieu Poirier
2024-12-06 18:09 ` Arnaud POULIQUEN
2024-12-04 17:39 ` Mathieu Poirier
2024-12-09 23:14 ` Bjorn Andersson
2024-12-10 10:33 ` Arnaud POULIQUEN
2025-02-12 3:54 ` Bjorn Andersson
2025-02-12 13:48 ` Arnaud POULIQUEN
2025-03-04 15:23 ` Bjorn Andersson
2025-03-05 12:50 ` Arnaud POULIQUEN
2024-11-28 8:42 ` [PATCH v15 4/8] remoteproc: Rename load() operation to load_segments() in rproc_ops struct Arnaud Pouliquen
2024-12-04 18:02 ` Mathieu Poirier
2024-11-28 8:42 ` [PATCH v15 5/8] remoteproc: Make load_segments and load_fw ops exclusive and optional Arnaud Pouliquen
2024-12-04 17:53 ` Mathieu Poirier
2024-11-28 8:42 ` [PATCH v15 6/8] dt-bindings: remoteproc: Add compatibility for TEE support Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 7/8] remoteproc: stm32: Create sub-functions to request shutdown and release Arnaud Pouliquen
2024-11-28 8:42 ` [PATCH v15 8/8] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware Arnaud Pouliquen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CANLsYkxk0NdKmbzOPEcVHbVpW9hPEz0gS-+9PysWMULDMxbkxw@mail.gmail.com \
--to=mathieu.poirier@linaro.org \
--cc=andersson@kernel.org \
--cc=arnaud.pouliquen@foss.st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).