* [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-06 5:45 ` Krzysztof Kozlowski
2024-08-05 17:08 ` [PATCH v4 2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients Bartosz Golaszewski
` (7 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The fastrpc components on the SA8775P SoC can require up to 10 IOMMU
entries. Bump the maxItems.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
index c27a8f33d8d7..f52931c0035a 100644
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -81,7 +81,7 @@ patternProperties:
iommus:
minItems: 1
- maxItems: 3
+ maxItems: 10
qcom,nsessions:
$ref: /schemas/types.yaml#/definitions/uint32
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
2024-08-05 17:08 ` [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus Bartosz Golaszewski
@ 2024-08-06 5:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 13+ messages in thread
From: Krzysztof Kozlowski @ 2024-08-06 5:45 UTC (permalink / raw)
To: Bartosz Golaszewski, Srinivas Kandagatla, Amol Maheshwari,
Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Manivannan Sadhasivam, Jassi Brar, Bjorn Andersson,
Mathieu Poirier, Arnd Bergmann, Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu
On 05/08/2024 19:08, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> The fastrpc components on the SA8775P SoC can require up to 10 IOMMU
> entries. Bump the maxItems.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v4 2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
2024-08-05 17:08 ` [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-05 17:08 ` [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP Bartosz Golaszewski
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Krzysztof Kozlowski
From: Tengfei Fan <quic_tengfan@quicinc.com>
Add GPDSP0 and GPDSP1 clients for SA8775p platform.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
include/dt-bindings/mailbox/qcom-ipcc.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
index fbfa3febc66d..fd85a79381b3 100644
--- a/include/dt-bindings/mailbox/qcom-ipcc.h
+++ b/include/dt-bindings/mailbox/qcom-ipcc.h
@@ -33,5 +33,7 @@
#define IPCC_CLIENT_NSP1 18
#define IPCC_CLIENT_TME 23
#define IPCC_CLIENT_WPSS 24
+#define IPCC_CLIENT_GPDSP0 31
+#define IPCC_CLIENT_GPDSP1 32
#endif
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
2024-08-05 17:08 ` [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus Bartosz Golaszewski
2024-08-05 17:08 ` [PATCH v4 2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-28 19:48 ` Dmitry Baryshkov
2024-08-05 17:08 ` [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc Bartosz Golaszewski
` (5 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu
From: Tengfei Fan <quic_tengfan@quicinc.com>
Add support for PIL loading on ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 on
SA8775p SoCs.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
drivers/remoteproc/qcom_q6v5_pas.c | 92 ++++++++++++++++++++++++++++++++++++++
1 file changed, 92 insertions(+)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 88e7b84f223c..1ec1accddde7 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -829,6 +829,23 @@ static const struct adsp_data adsp_resource_init = {
.ssctl_id = 0x14,
};
+static const struct adsp_data sa8775p_adsp_resource = {
+ .crash_reason_smem = 423,
+ .firmware_name = "adsp.mbn",
+ .pas_id = 1,
+ .minidump_id = 5,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "lcx",
+ "lmx",
+ NULL
+ },
+ .load_state = "adsp",
+ .ssr_name = "lpass",
+ .sysmon_name = "adsp",
+ .ssctl_id = 0x14,
+};
+
static const struct adsp_data sdm845_adsp_resource_init = {
.crash_reason_smem = 423,
.firmware_name = "adsp.mdt",
@@ -942,6 +959,42 @@ static const struct adsp_data cdsp_resource_init = {
.ssctl_id = 0x17,
};
+static const struct adsp_data sa8775p_cdsp0_resource = {
+ .crash_reason_smem = 601,
+ .firmware_name = "cdsp0.mbn",
+ .pas_id = 18,
+ .minidump_id = 7,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mxc",
+ "nsp",
+ NULL
+ },
+ .load_state = "cdsp",
+ .ssr_name = "cdsp",
+ .sysmon_name = "cdsp",
+ .ssctl_id = 0x17,
+};
+
+static const struct adsp_data sa8775p_cdsp1_resource = {
+ .crash_reason_smem = 633,
+ .firmware_name = "cdsp1.mbn",
+ .pas_id = 30,
+ .minidump_id = 20,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mxc",
+ "nsp",
+ NULL
+ },
+ .load_state = "nsp",
+ .ssr_name = "cdsp1",
+ .sysmon_name = "cdsp1",
+ .ssctl_id = 0x20,
+};
+
static const struct adsp_data sdm845_cdsp_resource_init = {
.crash_reason_smem = 601,
.firmware_name = "cdsp.mdt",
@@ -1083,6 +1136,40 @@ static const struct adsp_data sm8350_cdsp_resource = {
.ssctl_id = 0x17,
};
+static const struct adsp_data sa8775p_gpdsp0_resource = {
+ .crash_reason_smem = 640,
+ .firmware_name = "gpdsp0.mbn",
+ .pas_id = 39,
+ .minidump_id = 21,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mxc",
+ NULL
+ },
+ .load_state = "gpdsp0",
+ .ssr_name = "gpdsp0",
+ .sysmon_name = "gpdsp0",
+ .ssctl_id = 0x21,
+};
+
+static const struct adsp_data sa8775p_gpdsp1_resource = {
+ .crash_reason_smem = 641,
+ .firmware_name = "gpdsp1.mbn",
+ .pas_id = 40,
+ .minidump_id = 22,
+ .auto_boot = true,
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mxc",
+ NULL
+ },
+ .load_state = "gpdsp1",
+ .ssr_name = "gpdsp1",
+ .sysmon_name = "gpdsp1",
+ .ssctl_id = 0x22,
+};
+
static const struct adsp_data mpss_resource_init = {
.crash_reason_smem = 421,
.firmware_name = "modem.mdt",
@@ -1329,6 +1416,11 @@ static const struct of_device_id adsp_of_match[] = {
{ .compatible = "qcom,qcs404-adsp-pas", .data = &adsp_resource_init },
{ .compatible = "qcom,qcs404-cdsp-pas", .data = &cdsp_resource_init },
{ .compatible = "qcom,qcs404-wcss-pas", .data = &wcss_resource_init },
+ { .compatible = "qcom,sa8775p-adsp-pas", .data = &sa8775p_adsp_resource},
+ { .compatible = "qcom,sa8775p-cdsp0-pas", .data = &sa8775p_cdsp0_resource},
+ { .compatible = "qcom,sa8775p-cdsp1-pas", .data = &sa8775p_cdsp1_resource},
+ { .compatible = "qcom,sa8775p-gpdsp0-pas", .data = &sa8775p_gpdsp0_resource},
+ { .compatible = "qcom,sa8775p-gpdsp1-pas", .data = &sa8775p_gpdsp1_resource},
{ .compatible = "qcom,sc7180-adsp-pas", .data = &sm8250_adsp_resource},
{ .compatible = "qcom,sc7180-mpss-pas", .data = &mpss_resource_init},
{ .compatible = "qcom,sc7280-adsp-pas", .data = &sm8350_adsp_resource},
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
2024-08-05 17:08 ` [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP Bartosz Golaszewski
@ 2024-08-28 19:48 ` Dmitry Baryshkov
0 siblings, 0 replies; 13+ messages in thread
From: Dmitry Baryshkov @ 2024-08-28 19:48 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio, linux-arm-msm, dri-devel,
devicetree, linux-kernel, linux-remoteproc, Bartosz Golaszewski,
Tengfei Fan, Ling Xu
On Mon, Aug 05, 2024 at 07:08:04PM GMT, Bartosz Golaszewski wrote:
> From: Tengfei Fan <quic_tengfan@quicinc.com>
>
> Add support for PIL loading on ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 on
> SA8775p SoCs.
>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> drivers/remoteproc/qcom_q6v5_pas.c | 92 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (2 preceding siblings ...)
2024-08-05 17:08 ` [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-28 19:49 ` Dmitry Baryshkov
2024-08-05 17:08 ` [PATCH v4 5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes Bartosz Golaszewski
` (4 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu
From: Ling Xu <quic_lxu5@quicinc.com>
The fastrpc supports 4 remoteproc. There are some products which
support cdsp1 remoteproc. Add changes to support cdsp1 remoteproc.
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
[Bartosz: ported to mainline]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
drivers/misc/fastrpc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 5204fda51da3..07bf8532557e 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -27,7 +27,8 @@
#define MDSP_DOMAIN_ID (1)
#define SDSP_DOMAIN_ID (2)
#define CDSP_DOMAIN_ID (3)
-#define FASTRPC_DEV_MAX 4 /* adsp, mdsp, slpi, cdsp*/
+#define CDSP1_DOMAIN_ID (4)
+#define FASTRPC_DEV_MAX 5 /* adsp, mdsp, slpi, cdsp, cdsp1 */
#define FASTRPC_MAX_SESSIONS 14
#define FASTRPC_MAX_VMIDS 16
#define FASTRPC_ALIGN 128
@@ -106,7 +107,7 @@
#define miscdev_to_fdevice(d) container_of(d, struct fastrpc_device, miscdev)
static const char *domains[FASTRPC_DEV_MAX] = { "adsp", "mdsp",
- "sdsp", "cdsp"};
+ "sdsp", "cdsp", "cdsp1" };
struct fastrpc_phy_page {
u64 addr; /* physical address */
u64 size; /* size of contiguous region */
@@ -2286,7 +2287,7 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
return err;
}
- for (i = 0; i <= CDSP_DOMAIN_ID; i++) {
+ for (i = 0; i < FASTRPC_DEV_MAX; i++) {
if (!strcmp(domains[i], domain)) {
domain_id = i;
break;
@@ -2344,13 +2345,14 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
case ADSP_DOMAIN_ID:
case MDSP_DOMAIN_ID:
case SDSP_DOMAIN_ID:
- /* Unsigned PD offloading is only supported on CDSP*/
+ /* Unsigned PD offloading is only supported on CDSP and CDSP1 */
data->unsigned_support = false;
err = fastrpc_device_register(rdev, data, secure_dsp, domains[domain_id]);
if (err)
goto fdev_error;
break;
case CDSP_DOMAIN_ID:
+ case CDSP1_DOMAIN_ID:
data->unsigned_support = true;
/* Create both device nodes so that we can allow both Signed and Unsigned PD */
err = fastrpc_device_register(rdev, data, true, domains[domain_id]);
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc
2024-08-05 17:08 ` [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc Bartosz Golaszewski
@ 2024-08-28 19:49 ` Dmitry Baryshkov
0 siblings, 0 replies; 13+ messages in thread
From: Dmitry Baryshkov @ 2024-08-28 19:49 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio, linux-arm-msm, dri-devel,
devicetree, linux-kernel, linux-remoteproc, Bartosz Golaszewski,
Tengfei Fan, Ling Xu
On Mon, Aug 05, 2024 at 07:08:05PM GMT, Bartosz Golaszewski wrote:
> From: Ling Xu <quic_lxu5@quicinc.com>
>
> The fastrpc supports 4 remoteproc. There are some products which
> support cdsp1 remoteproc. Add changes to support cdsp1 remoteproc.
I'd very much prefer to see this abstracted somehow, but it seems
impossible with the current driver code.
>
> Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
> [Bartosz: ported to mainline]
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> drivers/misc/fastrpc.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v4 5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (3 preceding siblings ...)
2024-08-05 17:08 ` [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-05 17:08 ` [PATCH v4 6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs Bartosz Golaszewski
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Dmitry Baryshkov
From: Tengfei Fan <quic_tengfan@quicinc.com>
Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
SA8775p SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
[Ling: added the fastrcp nodes]
Co-developed-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
[Bartosz: ported to mainline]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 548 ++++++++++++++++++++++++++++++++++
1 file changed, 548 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index ad8e567575e5..50ec4712e39f 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -564,6 +565,121 @@ cpucp_fw_mem: cpucp-fw@db200000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <12>;
+
+ smp2p_cdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp0 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <17>;
+
+ smp2p_gpdsp0_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp0_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-gpdsp1 {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1 IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <18>;
+
+ smp2p_gpdsp1_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_gpdsp1_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -3447,6 +3563,92 @@ cpufreq_hw: cpufreq@18591000 {
#freq-domain-cells = <1>;
};
+ remoteproc_gpdsp0: remoteproc@20c00000 {
+ compatible = "qcom,sa8775p-gpdsp0-pas";
+ reg = <0x0 0x20c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp0_in 0 0>,
+ <&smp2p_gpdsp0_in 2 0>,
+ <&smp2p_gpdsp0_in 1 0>,
+ <&smp2p_gpdsp0_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP0 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP0
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp0";
+ qcom,remote-pid = <17>;
+ };
+ };
+
+ remoteproc_gpdsp1: remoteproc@21c00000 {
+ compatible = "qcom,sa8775p-gpdsp1-pas";
+ reg = <0x0 0x21c00000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_gpdsp1_in 0 0>,
+ <&smp2p_gpdsp1_in 2 0>,
+ <&smp2p_gpdsp1_in 1 0>,
+ <&smp2p_gpdsp1_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
+ power-domain-names = "cx", "mxc";
+
+ interconnects = <&gpdsp_anoc MASTER_DSP1 0
+ &config_noc SLAVE_CLK_CTL 0>;
+
+ memory-region = <&pil_gdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_gpdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_GPDSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "gpdsp1";
+ qcom,remote-pid = <18>;
+ };
+ };
+
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
@@ -3528,6 +3730,352 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
status = "disabled";
};
+
+ remoteproc_cdsp0: remoteproc@26300000 {
+ compatible = "qcom,sa8775p-cdsp0-pas";
+ reg = <0x0 0x26300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP0>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspa_noc MASTER_CDSP_PROC 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp0_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp0_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
+ remoteproc_cdsp1: remoteproc@2a300000 {
+ compatible = "qcom,sa8775p-cdsp1-pas";
+ reg = <0x0 0x2A300000 0x0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP1>;
+ power-domain-names = "cx", "mxc", "nsp";
+
+ interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
+ &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_cdsp1_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp1_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_NSP1
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <12>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2941 0x04a0>,
+ <&apps_smmu 0x2961 0x04a0>,
+ <&apps_smmu 0x2981 0x0400>,
+ <&apps_smmu 0x29c1 0x04a0>,
+ <&apps_smmu 0x29e1 0x04a0>,
+ <&apps_smmu 0x2d41 0x04a0>,
+ <&apps_smmu 0x2d61 0x04a0>,
+ <&apps_smmu 0x2d81 0x0400>,
+ <&apps_smmu 0x2dc1 0x04a0>,
+ <&apps_smmu 0x2de1 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2942 0x04a0>,
+ <&apps_smmu 0x2962 0x04a0>,
+ <&apps_smmu 0x2982 0x0400>,
+ <&apps_smmu 0x29c2 0x04a0>,
+ <&apps_smmu 0x29e2 0x04a0>,
+ <&apps_smmu 0x2d42 0x04a0>,
+ <&apps_smmu 0x2d62 0x04a0>,
+ <&apps_smmu 0x2d82 0x0400>,
+ <&apps_smmu 0x2dc2 0x04a0>,
+ <&apps_smmu 0x2de2 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x2943 0x04a0>,
+ <&apps_smmu 0x2963 0x04a0>,
+ <&apps_smmu 0x2983 0x0400>,
+ <&apps_smmu 0x29c3 0x04a0>,
+ <&apps_smmu 0x29e3 0x04a0>,
+ <&apps_smmu 0x2d43 0x04a0>,
+ <&apps_smmu 0x2d63 0x04a0>,
+ <&apps_smmu 0x2d83 0x0400>,
+ <&apps_smmu 0x2dc3 0x04a0>,
+ <&apps_smmu 0x2de3 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x2944 0x04a0>,
+ <&apps_smmu 0x2964 0x04a0>,
+ <&apps_smmu 0x2984 0x0400>,
+ <&apps_smmu 0x29c4 0x04a0>,
+ <&apps_smmu 0x29e4 0x04a0>,
+ <&apps_smmu 0x2d44 0x04a0>,
+ <&apps_smmu 0x2d64 0x04a0>,
+ <&apps_smmu 0x2d84 0x0400>,
+ <&apps_smmu 0x2dc4 0x04a0>,
+ <&apps_smmu 0x2de4 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x2945 0x04a0>,
+ <&apps_smmu 0x2965 0x04a0>,
+ <&apps_smmu 0x2985 0x0400>,
+ <&apps_smmu 0x29c5 0x04a0>,
+ <&apps_smmu 0x29e5 0x04a0>,
+ <&apps_smmu 0x2d45 0x04a0>,
+ <&apps_smmu 0x2d65 0x04a0>,
+ <&apps_smmu 0x2d85 0x0400>,
+ <&apps_smmu 0x2dc5 0x04a0>,
+ <&apps_smmu 0x2de5 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2946 0x04a0>,
+ <&apps_smmu 0x2966 0x04a0>,
+ <&apps_smmu 0x2986 0x0400>,
+ <&apps_smmu 0x29c6 0x04a0>,
+ <&apps_smmu 0x29e6 0x04a0>,
+ <&apps_smmu 0x2d46 0x04a0>,
+ <&apps_smmu 0x2d66 0x04a0>,
+ <&apps_smmu 0x2d86 0x0400>,
+ <&apps_smmu 0x2dc6 0x04a0>,
+ <&apps_smmu 0x2de6 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2947 0x04a0>,
+ <&apps_smmu 0x2967 0x04a0>,
+ <&apps_smmu 0x2987 0x0400>,
+ <&apps_smmu 0x29c7 0x04a0>,
+ <&apps_smmu 0x29e7 0x04a0>,
+ <&apps_smmu 0x2d47 0x04a0>,
+ <&apps_smmu 0x2d67 0x04a0>,
+ <&apps_smmu 0x2d87 0x0400>,
+ <&apps_smmu 0x2dc7 0x04a0>,
+ <&apps_smmu 0x2de7 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2948 0x04a0>,
+ <&apps_smmu 0x2968 0x04a0>,
+ <&apps_smmu 0x2988 0x0400>,
+ <&apps_smmu 0x29c8 0x04a0>,
+ <&apps_smmu 0x29e8 0x04a0>,
+ <&apps_smmu 0x2d48 0x04a0>,
+ <&apps_smmu 0x2d68 0x04a0>,
+ <&apps_smmu 0x2d88 0x0400>,
+ <&apps_smmu 0x2dc8 0x04a0>,
+ <&apps_smmu 0x2de8 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@9 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <9>;
+ iommus = <&apps_smmu 0x2949 0x04a0>,
+ <&apps_smmu 0x2969 0x04a0>,
+ <&apps_smmu 0x2989 0x0400>,
+ <&apps_smmu 0x29c9 0x04a0>,
+ <&apps_smmu 0x29e9 0x04a0>,
+ <&apps_smmu 0x2d49 0x04a0>,
+ <&apps_smmu 0x2d69 0x04a0>,
+ <&apps_smmu 0x2d89 0x0400>,
+ <&apps_smmu 0x2dc9 0x04a0>,
+ <&apps_smmu 0x2de9 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@10 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <10>;
+ iommus = <&apps_smmu 0x294a 0x04a0>,
+ <&apps_smmu 0x296a 0x04a0>,
+ <&apps_smmu 0x298a 0x0400>,
+ <&apps_smmu 0x29ca 0x04a0>,
+ <&apps_smmu 0x29ea 0x04a0>,
+ <&apps_smmu 0x2d4a 0x04a0>,
+ <&apps_smmu 0x2d6a 0x04a0>,
+ <&apps_smmu 0x2d8a 0x0400>,
+ <&apps_smmu 0x2dca 0x04a0>,
+ <&apps_smmu 0x2dea 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x294b 0x04a0>,
+ <&apps_smmu 0x296b 0x04a0>,
+ <&apps_smmu 0x298b 0x0400>,
+ <&apps_smmu 0x29cb 0x04a0>,
+ <&apps_smmu 0x29eb 0x04a0>,
+ <&apps_smmu 0x2d4b 0x04a0>,
+ <&apps_smmu 0x2d6b 0x04a0>,
+ <&apps_smmu 0x2d8b 0x0400>,
+ <&apps_smmu 0x2dcb 0x04a0>,
+ <&apps_smmu 0x2deb 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x294c 0x04a0>,
+ <&apps_smmu 0x296c 0x04a0>,
+ <&apps_smmu 0x298c 0x0400>,
+ <&apps_smmu 0x29cc 0x04a0>,
+ <&apps_smmu 0x29ec 0x04a0>,
+ <&apps_smmu 0x2d4c 0x04a0>,
+ <&apps_smmu 0x2d6c 0x04a0>,
+ <&apps_smmu 0x2d8c 0x0400>,
+ <&apps_smmu 0x2dcc 0x04a0>,
+ <&apps_smmu 0x2dec 0x04a0>;
+ dma-coherent;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x294d 0x04a0>,
+ <&apps_smmu 0x296d 0x04a0>,
+ <&apps_smmu 0x298d 0x0400>,
+ <&apps_smmu 0x29Cd 0x04a0>,
+ <&apps_smmu 0x29ed 0x04a0>,
+ <&apps_smmu 0x2d4d 0x04a0>,
+ <&apps_smmu 0x2d6d 0x04a0>,
+ <&apps_smmu 0x2d8d 0x0400>,
+ <&apps_smmu 0x2dcd 0x04a0>,
+ <&apps_smmu 0x2ded 0x04a0>;
+ dma-coherent;
+ };
+ };
+ };
+ };
+
+ remoteproc_adsp: remoteproc@30000000 {
+ compatible = "qcom,sa8775p-adsp-pas";
+ reg = <0x0 0x30000000 0x0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&pil_adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
};
thermal-zones {
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v4 6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (4 preceding siblings ...)
2024-08-05 17:08 ` [PATCH v4 5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes Bartosz Golaszewski
@ 2024-08-05 17:08 ` Bartosz Golaszewski
2024-08-15 19:15 ` (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bjorn Andersson
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Bartosz Golaszewski @ 2024-08-05 17:08 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Bjorn Andersson, Mathieu Poirier, Arnd Bergmann,
Greg Kroah-Hartman, Konrad Dybcio
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Dmitry Baryshkov
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index 2a6170623ea9..0c1b21def4b6 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -702,6 +702,31 @@ &pcie1_phy {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+ status = "okay";
+};
+
&uart10 {
compatible = "qcom,geni-debug-uart";
pinctrl-0 = <&qup_uart10_default>;
--
2.43.0
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (5 preceding siblings ...)
2024-08-05 17:08 ` [PATCH v4 6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs Bartosz Golaszewski
@ 2024-08-15 19:15 ` Bjorn Andersson
2024-08-15 20:40 ` Bjorn Andersson
2024-08-16 8:48 ` Srinivas Kandagatla
8 siblings, 0 replies; 13+ messages in thread
From: Bjorn Andersson @ 2024-08-15 19:15 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Mathieu Poirier, Arnd Bergmann, Greg Kroah-Hartman,
Konrad Dybcio, Bartosz Golaszewski
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Krzysztof Kozlowski, Dmitry Baryshkov
On Mon, 05 Aug 2024 19:08:01 +0200, Bartosz Golaszewski wrote:
> Add DT bindings, relevant DT defines, DTS nodes and driver changes
> required to enable the remoteprocs on sa8775p.
>
> To: Bjorn Andersson <andersson@kernel.org>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> To: Rob Herring <robh@kernel.org>
> To: Krzysztof Kozlowski <krzk+dt@kernel.org>
> To: Conor Dooley <conor+dt@kernel.org>
> To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> To: Jassi Brar <jassisinghbrar@gmail.com>
> To: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> [...]
Applied, thanks!
[3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
commit: 9091225ba28c0106d3cd041c7abf5551a94bb524
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (6 preceding siblings ...)
2024-08-15 19:15 ` (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bjorn Andersson
@ 2024-08-15 20:40 ` Bjorn Andersson
2024-08-16 8:48 ` Srinivas Kandagatla
8 siblings, 0 replies; 13+ messages in thread
From: Bjorn Andersson @ 2024-08-15 20:40 UTC (permalink / raw)
To: Srinivas Kandagatla, Amol Maheshwari, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Manivannan Sadhasivam,
Jassi Brar, Mathieu Poirier, Arnd Bergmann, Greg Kroah-Hartman,
Konrad Dybcio, Bartosz Golaszewski
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Krzysztof Kozlowski, Dmitry Baryshkov
On Mon, 05 Aug 2024 19:08:01 +0200, Bartosz Golaszewski wrote:
> Add DT bindings, relevant DT defines, DTS nodes and driver changes
> required to enable the remoteprocs on sa8775p.
>
> To: Bjorn Andersson <andersson@kernel.org>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> To: Rob Herring <robh@kernel.org>
> To: Krzysztof Kozlowski <krzk+dt@kernel.org>
> To: Conor Dooley <conor+dt@kernel.org>
> To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> To: Jassi Brar <jassisinghbrar@gmail.com>
> To: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> [...]
Applied, thanks!
[2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
commit: 89817522b1a58970ac1247f65af009b046344fb0
[5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
commit: df54dcb34ff2eaabc5f74afbdb2fec104e2263e6
[6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
commit: 2bec6f6a22815c6a5651d2b9aa4f54baf1ae5e73
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
2024-08-05 17:08 [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP Bartosz Golaszewski
` (7 preceding siblings ...)
2024-08-15 20:40 ` Bjorn Andersson
@ 2024-08-16 8:48 ` Srinivas Kandagatla
8 siblings, 0 replies; 13+ messages in thread
From: Srinivas Kandagatla @ 2024-08-16 8:48 UTC (permalink / raw)
To: Amol Maheshwari, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Manivannan Sadhasivam, Jassi Brar, Bjorn Andersson,
Mathieu Poirier, Arnd Bergmann, Greg Kroah-Hartman, Konrad Dybcio,
Bartosz Golaszewski
Cc: linux-arm-msm, dri-devel, devicetree, linux-kernel,
linux-remoteproc, Bartosz Golaszewski, Tengfei Fan, Ling Xu,
Krzysztof Kozlowski, Dmitry Baryshkov
On Mon, 05 Aug 2024 19:08:01 +0200, Bartosz Golaszewski wrote:
> Add DT bindings, relevant DT defines, DTS nodes and driver changes
> required to enable the remoteprocs on sa8775p.
>
> To: Bjorn Andersson <andersson@kernel.org>
> To: Mathieu Poirier <mathieu.poirier@linaro.org>
> To: Rob Herring <robh@kernel.org>
> To: Krzysztof Kozlowski <krzk+dt@kernel.org>
> To: Conor Dooley <conor+dt@kernel.org>
> To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> To: Jassi Brar <jassisinghbrar@gmail.com>
> To: Konrad Dybcio <konrad.dybcio@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-remoteproc@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> [...]
Applied, thanks!
[1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
commit: 42a21d00aac515fad1f9a10052c6e9710c6f7813
[4/6] misc: fastrpc: Add support for cdsp1 remoteproc
commit: 590c42d9e278f8e6bf6d673f3101ac102369efc7
Best regards,
--
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
^ permalink raw reply [flat|nested] 13+ messages in thread