* [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations
@ 2024-04-16 10:19 Russell King (Oracle)
2024-04-18 1:40 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Russell King (Oracle) @ 2024-04-16 10:19 UTC (permalink / raw
To: Andrew Lunn, Vladimir Oltean
Cc: Cl__ment L__ger, Florian Fainelli, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, linux-renesas-soc, netdev
Convert rzn1_a5psw to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide a stub for
the mac_config() method which is mandatory.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/rzn1_a5psw.c | 47 ++++++++++++++++++++++++------------
1 file changed, 31 insertions(+), 16 deletions(-)
diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 10092ea85e46..92e032972b34 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -239,23 +239,31 @@ static void a5psw_phylink_get_caps(struct dsa_switch *ds, int port,
}
static struct phylink_pcs *
-a5psw_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+a5psw_phylink_mac_select_pcs(struct phylink_config *config,
phy_interface_t interface)
{
- struct dsa_port *dp = dsa_to_port(ds, port);
- struct a5psw *a5psw = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct a5psw *a5psw = dp->ds->priv;
- if (!dsa_port_is_cpu(dp) && a5psw->pcs[port])
- return a5psw->pcs[port];
+ if (dsa_port_is_cpu(dp))
+ return NULL;
- return NULL;
+ return a5psw->pcs[dp->index];
+}
+
+static void a5psw_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
}
-static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface)
{
- struct a5psw *a5psw = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct a5psw *a5psw = dp->ds->priv;
+ int port = dp->index;
u32 cmd_cfg;
cmd_cfg = a5psw_reg_readl(a5psw, A5PSW_CMD_CFG(port));
@@ -263,15 +271,17 @@ static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
}
-static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause, bool rx_pause)
+ int speed, int duplex, bool tx_pause,
+ bool rx_pause)
{
u32 cmd_cfg = A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA |
A5PSW_CMD_CFG_TX_CRC_APPEND;
- struct a5psw *a5psw = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct a5psw *a5psw = dp->ds->priv;
if (speed == SPEED_1000)
cmd_cfg |= A5PSW_CMD_CFG_ETH_SPEED;
@@ -284,7 +294,7 @@ static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
if (!rx_pause)
cmd_cfg &= ~A5PSW_CMD_CFG_PAUSE_IGNORE;
- a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
+ a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(dp->index), cmd_cfg);
}
static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
@@ -992,15 +1002,19 @@ static int a5psw_setup(struct dsa_switch *ds)
return 0;
}
+static const struct phylink_mac_ops a5psw_phylink_mac_ops = {
+ .mac_select_pcs = a5psw_phylink_mac_select_pcs,
+ .mac_config = a5psw_phylink_mac_config,
+ .mac_link_down = a5psw_phylink_mac_link_down,
+ .mac_link_up = a5psw_phylink_mac_link_up,
+};
+
static const struct dsa_switch_ops a5psw_switch_ops = {
.get_tag_protocol = a5psw_get_tag_protocol,
.setup = a5psw_setup,
.port_disable = a5psw_port_disable,
.port_enable = a5psw_port_enable,
.phylink_get_caps = a5psw_phylink_get_caps,
- .phylink_mac_select_pcs = a5psw_phylink_mac_select_pcs,
- .phylink_mac_link_down = a5psw_phylink_mac_link_down,
- .phylink_mac_link_up = a5psw_phylink_mac_link_up,
.port_change_mtu = a5psw_port_change_mtu,
.port_max_mtu = a5psw_port_max_mtu,
.get_sset_count = a5psw_get_sset_count,
@@ -1252,6 +1266,7 @@ static int a5psw_probe(struct platform_device *pdev)
ds->dev = dev;
ds->num_ports = A5PSW_PORTS_NUM;
ds->ops = &a5psw_switch_ops;
+ ds->phylink_mac_ops = &a5psw_phylink_mac_ops;
ds->priv = a5psw;
ret = dsa_register_switch(ds);
--
2.30.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations
2024-04-16 10:19 [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations Russell King (Oracle)
@ 2024-04-18 1:40 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2024-04-18 1:40 UTC (permalink / raw
To: Russell King
Cc: andrew, olteanv, clement.leger, f.fainelli, davem, edumazet, kuba,
pabeni, linux-renesas-soc, netdev
Hello:
This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:
On Tue, 16 Apr 2024 11:19:19 +0100 you wrote:
> Convert rzn1_a5psw to provide its own phylink MAC operations, thus
> avoiding the shim layer in DSA's port.c. We need to provide a stub for
> the mac_config() method which is mandatory.
>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> drivers/net/dsa/rzn1_a5psw.c | 47 ++++++++++++++++++++++++------------
> 1 file changed, 31 insertions(+), 16 deletions(-)
Here is the summary with links:
- [net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations
https://git.kernel.org/netdev/net-next/c/a3c363df0ad2
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-04-18 1:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-04-16 10:19 [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations Russell King (Oracle)
2024-04-18 1:40 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).