Linux-Renesas-SoC Archive mirror
 help / color / mirror / Atom feed
From: Romain Gantois <romain.gantois@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Magnus Damm" <magnus.damm@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
	"Jose Abreu" <joabreu@synopsys.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Clément Léger" <clement.leger@bootlin.com>,
	"Serge Semin" <fancer.lancer@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	netdev@vger.kernel.org,  devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,  linux-renesas-soc@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	 linux-arm-kernel@lists.infradead.org,
	 Romain Gantois <romain.gantois@bootlin.com>
Subject: [PATCH net-next v6 3/7] net: stmmac: Make stmmac_xpcs_setup() generic to all PCS devices
Date: Fri, 10 May 2024 09:38:10 +0200	[thread overview]
Message-ID: <20240510-rzn1-gmac1-v6-3-b63942be334c@bootlin.com> (raw)
In-Reply-To: <20240510-rzn1-gmac1-v6-0-b63942be334c@bootlin.com>

From: Serge Semin <fancer.lancer@gmail.com>

A pcs_init() callback will be introduced to stmmac in a future patch. This
new function will be called during the hardware initialization phase.
Instead of separately initializing XPCS and PCS components, let's group all
PCS-related hardware initialization logic in the current
stmmac_xpcs_setup() function.

Rename stmmac_xpcs_setup() to stmmac_pcs_setup() and move the conditional
call to stmmac_xpcs_setup() inside the function itself.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 28 ++++++++++++++---------
 3 files changed, 22 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index badfe686a5702..ed38099ca7406 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -360,7 +360,7 @@ enum stmmac_state {
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
-int stmmac_xpcs_setup(struct mii_bus *mii);
+int stmmac_pcs_setup(struct net_device *ndev);
 void stmmac_pcs_clean(struct net_device *ndev);
 void stmmac_set_ethtool_ops(struct net_device *netdev);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 0ac99c132733d..ef285b3c56ab9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7754,11 +7754,9 @@ int stmmac_dvr_probe(struct device *device,
 	if (priv->plat->speed_mode_2500)
 		priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
 
-	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
-		ret = stmmac_xpcs_setup(priv->mii);
-		if (ret)
-			goto error_xpcs_setup;
-	}
+	ret = stmmac_pcs_setup(ndev);
+	if (ret)
+		goto error_pcs_setup;
 
 	ret = stmmac_phy_setup(priv);
 	if (ret) {
@@ -7791,7 +7789,7 @@ int stmmac_dvr_probe(struct device *device,
 	phylink_destroy(priv->phylink);
 error_phy_setup:
 	stmmac_pcs_clean(ndev);
-error_xpcs_setup:
+error_pcs_setup:
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 73ba9901a4439..778d79cdb2e6d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -495,31 +495,37 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
-int stmmac_xpcs_setup(struct mii_bus *bus)
+int stmmac_pcs_setup(struct net_device *ndev)
 {
-	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv;
 	struct dw_xpcs *xpcs;
+	int ret = -ENODEV;
 	int mode, addr;
 
 	priv = netdev_priv(ndev);
 	mode = priv->plat->phy_interface;
 
-	/* Try to probe the XPCS by scanning all addresses. */
-	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-		xpcs = xpcs_create_mdiodev(bus, addr, mode);
-		if (IS_ERR(xpcs))
-			continue;
+	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
+		/* Try to probe the XPCS by scanning all addresses */
+		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+			xpcs = xpcs_create_mdiodev(priv->mii, addr, mode);
+			if (IS_ERR(xpcs))
+				continue;
 
-		priv->hw->xpcs = xpcs;
-		break;
+			ret = 0;
+			break;
+		}
+	} else {
+		return 0;
 	}
 
-	if (!priv->hw->xpcs) {
+	if (ret) {
 		dev_warn(priv->device, "No xPCS found\n");
-		return -ENODEV;
+		return ret;
 	}
 
+	priv->hw->xpcs = xpcs;
+
 	return 0;
 }
 

-- 
2.44.0


  parent reply	other threads:[~2024-05-10  7:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-10  7:38 [PATCH net-next v6 0/7] net: stmmac: Add support for RZN1 GMAC devices Romain Gantois
2024-05-10  7:38 ` [PATCH net-next v6 1/7] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support Romain Gantois
2024-05-10  7:38 ` [PATCH net-next v6 2/7] net: stmmac: Add dedicated XPCS cleanup method Romain Gantois
2024-05-10 15:52   ` Russell King (Oracle)
2024-05-10  7:38 ` Romain Gantois [this message]
2024-05-10 15:55   ` [PATCH net-next v6 3/7] net: stmmac: Make stmmac_xpcs_setup() generic to all PCS devices Russell King (Oracle)
2024-05-10  7:38 ` [PATCH net-next v6 4/7] net: stmmac: introduce pcs_init/pcs_exit stmmac operations Romain Gantois
2024-05-11 18:11   ` Simon Horman
2024-05-13  7:26     ` Romain Gantois
2024-05-10  7:38 ` [PATCH net-next v6 5/7] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit Romain Gantois
2024-05-10  7:38 ` [PATCH net-next v6 6/7] net: stmmac: add support for RZ/N1 GMAC Romain Gantois
2024-05-10 15:59   ` Russell King (Oracle)
2024-05-10  7:38 ` [PATCH net-next v6 7/7] ARM: dts: r9a06g032: describe GMAC1 Romain Gantois

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240510-rzn1-gmac1-v6-3-b63942be334c@bootlin.com \
    --to=romain.gantois@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=clement.leger@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=fancer.lancer@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).