From: Vincent Pelletier <plr.vincent@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Qiu Wenbo <qiuwenbo@kylinos.com.cn>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org,
David Abdurachmanov <david.abdurachmanov@sifive.com>
Subject: [PATCH v3 5/6] riscv: dts: sifive unmatched: Fix regulator for board rev3
Date: Fri, 19 Nov 2021 22:55:41 +0000 [thread overview]
Message-ID: <537742e7af4a21baf79429469ba7c30947ddca7a.1637362542.git.plr.vincent@gmail.com> (raw)
In-Reply-To: <378c64fb868b595430b0068a9af10fdbeceb8e12.1637362542.git.plr.vincent@gmail.com>
The existing values are rejected by the da9063 regulator driver, as they
are unachievable with the declared chip setup (non-merged vcore and bmem
are unable to provide the declared curent).
Fix voltages to match rev3 schematics, which also matches their boot-up
configuration within the chip's available precision.
Declare bcore1/bcore2 and bmem/bio as merged.
Set ldo09 and ldo10 as always-on as their consumers are not declared but
exist.
Drop ldo current limits as there is no current limit feature for these
regulators in the DA9063. Fixes warnings like:
DA9063_LDO3: Operation of current configuration missing
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
---
Changes since v2:
- Fix end-of-commit-message separator so change lists do not end up in them.
Changes since v1:
- Remove trailing "." on subject line.
---
.../boot/dts/sifive/hifive-unmatched-a00.dts | 84 ++++++-------------
1 file changed, 24 insertions(+), 60 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 6e7775fdae32..1abad0eec02e 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -93,47 +93,31 @@ wdt {
};
regulators {
- vdd_bcore1: bcore1 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-min-microamp = <5000000>;
- regulator-max-microamp = <5000000>;
- regulator-always-on;
- };
-
- vdd_bcore2: bcore2 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-min-microamp = <5000000>;
- regulator-max-microamp = <5000000>;
+ vdd_bcore: bcores-merged {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <4800000>;
+ regulator-max-microamp = <4800000>;
regulator-always-on;
};
vdd_bpro: bpro {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <2500000>;
- regulator-max-microamp = <2500000>;
+ regulator-min-microamp = <2400000>;
+ regulator-max-microamp = <2400000>;
regulator-always-on;
};
vdd_bperi: bperi {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <1060000>;
+ regulator-max-microvolt = <1060000>;
regulator-min-microamp = <1500000>;
regulator-max-microamp = <1500000>;
regulator-always-on;
};
- vdd_bmem: bmem {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-min-microamp = <3000000>;
- regulator-max-microamp = <3000000>;
- regulator-always-on;
- };
-
- vdd_bio: bio {
+ vdd_bmem_bio: bmem-bio-merged {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3000000>;
@@ -144,86 +128,66 @@ vdd_bio: bio {
vdd_ldo1: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <100000>;
regulator-always-on;
};
vdd_ldo2: ldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
regulator-always-on;
};
vdd_ldo3: ldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo4: ldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_ldo5: ldo5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <100000>;
- regulator-max-microamp = <100000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo6: ldo6 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo7: ldo7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo8: ldo8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ld09: ldo9 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- regulator-min-microamp = <200000>;
- regulator-max-microamp = <200000>;
+ regulator-always-on;
};
vdd_ldo10: ldo10 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <300000>;
- regulator-max-microamp = <300000>;
+ regulator-always-on;
};
vdd_ldo11: ldo11 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
- regulator-min-microamp = <300000>;
- regulator-max-microamp = <300000>;
regulator-always-on;
};
};
--
2.33.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2021-11-19 22:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 22:55 [PATCH v3 1/6] riscv: dts: sifive unmatched: Name gpio lines Vincent Pelletier
2021-11-19 22:55 ` [PATCH v3 2/6] riscv: dts: sifive unmatched: Expose the board ID eeprom Vincent Pelletier
2021-11-21 17:23 ` Krzysztof Kozlowski
2021-11-19 22:55 ` [PATCH v3 3/6] riscv: dts: sifive unmatched: Expose the PMIC sub-functions Vincent Pelletier
2021-11-19 22:55 ` [PATCH v3 4/6] riscv: dts: sifive unmatched: Expose the FU740 core supply regulator Vincent Pelletier
2021-11-21 17:24 ` Krzysztof Kozlowski
2021-12-17 5:35 ` Palmer Dabbelt
2021-12-19 21:56 ` Heiko Stübner
2021-12-19 22:14 ` Rob Herring
2021-11-19 22:55 ` Vincent Pelletier [this message]
2021-12-02 21:42 ` [PATCH v3 5/6] riscv: dts: sifive unmatched: Fix regulator for board rev3 Palmer Dabbelt
2021-12-03 3:55 ` David Abdurachmanov
2021-11-19 22:55 ` [PATCH v3 6/6] riscv: dts: sifive unmatched: Link the tmp451 with its power supply Vincent Pelletier
2021-11-21 17:25 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537742e7af4a21baf79429469ba7c30947ddca7a.1637362542.git.plr.vincent@gmail.com \
--to=plr.vincent@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=david.abdurachmanov@sifive.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=qiuwenbo@kylinos.com.cn \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).