Re: [PATCH v5 2/2] riscv: dts: starfive: visionfive-2: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz

From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
To: Xingyu Wu <xingyu.wu@starfivetech.com>,
	Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>, Conor Dooley <conor@kernel.org>,
	 Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	 Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	 linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	 linux-riscv@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v5 2/2] riscv: dts: starfive: visionfive-2: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
Date: Tue, 7 May 2024 03:13:35 -0700	[thread overview]
Message-ID: <CAJM55Z-p9OLYCWHzhQ9HJ3vEt+u-qx0kxcWmGnO8FoarxJQiQQ@mail.gmail.com> (raw)
In-Reply-To: <20240507065319.274976-3-xingyu.wu@starfivetech.com>

Xingyu Wu wrote:
> CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
> But now PLL0 rate is 1GHz and the cpu frequency loads become
> 333/500/500/1000MHz in fact.
>
> The PLL0 rate should be default set to 1.5GHz and set the
> cpu_core rate to 500MHz in safe.
>
> Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for JH7110 SoC")
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

This should really be based on Conor's riscv-dt-for-next branch, eg. the change
should be to the new jh7110-common.dtsi instead since the Milk-V Mars board
would most likely also benefit from this change.

In any case:
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

> ---
>  .../boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi     | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 45b58b6f3df8..28981b267de4 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -390,6 +390,12 @@ spi_dev0: spi@0 {
>  	};
>  };
>
> +&syscrg {
> +	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
> +			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
> +	assigned-clock-rates = <500000000>, <1500000000>;
> +};
> +
>  &sysgpio {
>  	i2c0_pins: i2c0-0 {
>  		i2c-pins {
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv