From: Tudor Ambarus <tudor.ambarus@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Kees Cook <kees@kernel.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>
Cc: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-hardening@vger.kernel.org, llvm@lists.linux.dev
Subject: Re: [PATCH RFT 2/3] firmware: exynos-acpm: Count number of commands in acpm_xfer
Date: Thu, 19 Feb 2026 12:27:39 +0200 [thread overview]
Message-ID: <c9d056fb-b2ae-4631-a2b5-f55f214adecb@linaro.org> (raw)
In-Reply-To: <20260214-firmare-acpm-counted-v1-2-32af5735470e@oss.qualcomm.com>
On 2/14/26 2:39 PM, Krzysztof Kozlowski wrote:
> Struct acpm_xfer holds two buffers with u32 commands - rxd and txd - and
> counts their size by rxlen and txlen. "len" suffix is here ambiguous,
> so could mean length of the buffer or length of commands, and these are
> not the same since each command is u32. Rename these to rxcnt and
> txcnt, and change their usage to count the number of commands in each
> buffer.
>
> This will have a benafit of allowing to use __counted_by_ptr later.
^typo, benefit.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
> drivers/firmware/samsung/exynos-acpm-dvfs.c | 8 ++++----
> drivers/firmware/samsung/exynos-acpm-pmic.c | 14 +++++++-------
> drivers/firmware/samsung/exynos-acpm.c | 12 +++++++-----
> drivers/firmware/samsung/exynos-acpm.h | 4 ++--
> 4 files changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/firmware/samsung/exynos-acpm-dvfs.c b/drivers/firmware/samsung/exynos-acpm-dvfs.c
> index 1c5b2b143bcc..55ec6ad9d87e 100644
> --- a/drivers/firmware/samsung/exynos-acpm-dvfs.c
> +++ b/drivers/firmware/samsung/exynos-acpm-dvfs.c
> @@ -25,11 +25,11 @@ static void acpm_dvfs_set_xfer(struct acpm_xfer *xfer, u32 *cmd, size_t cmdlen,
> {
> xfer->acpm_chan_id = acpm_chan_id;
> xfer->txd = cmd;
> - xfer->txlen = cmdlen;
> + xfer->txcnt = cmdlen;
>
> if (response) {
> xfer->rxd = cmd;
> - xfer->rxlen = cmdlen;
> + xfer->rxcnt = cmdlen;
> }
> }
>
> @@ -50,7 +50,7 @@ int acpm_dvfs_set_rate(const struct acpm_handle *handle,
> u32 cmd[4];
>
> acpm_dvfs_init_set_rate_cmd(cmd, clk_id, rate);
> - acpm_dvfs_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id, false);
> + acpm_dvfs_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id, false);
>
> return acpm_do_xfer(handle, &xfer);
> }
> @@ -70,7 +70,7 @@ unsigned long acpm_dvfs_get_rate(const struct acpm_handle *handle,
> int ret;
>
> acpm_dvfs_init_get_rate_cmd(cmd, clk_id);
> - acpm_dvfs_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id, true);
> + acpm_dvfs_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id, true);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> diff --git a/drivers/firmware/samsung/exynos-acpm-pmic.c b/drivers/firmware/samsung/exynos-acpm-pmic.c
> index 44265db34ae6..26a9024d8ed8 100644
> --- a/drivers/firmware/samsung/exynos-acpm-pmic.c
> +++ b/drivers/firmware/samsung/exynos-acpm-pmic.c
> @@ -63,8 +63,8 @@ static void acpm_pmic_set_xfer(struct acpm_xfer *xfer, u32 *cmd, size_t cmdlen,
> {
> xfer->txd = cmd;
> xfer->rxd = cmd;
> - xfer->txlen = cmdlen;
> - xfer->rxlen = cmdlen;
> + xfer->txcnt = cmdlen;
> + xfer->rxcnt = cmdlen;
> xfer->acpm_chan_id = acpm_chan_id;
> }
>
> @@ -86,7 +86,7 @@ int acpm_pmic_read_reg(const struct acpm_handle *handle,
> int ret;
>
> acpm_pmic_init_read_cmd(cmd, type, reg, chan);
> - acpm_pmic_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id);
> + acpm_pmic_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> @@ -119,7 +119,7 @@ int acpm_pmic_bulk_read(const struct acpm_handle *handle,
> return -EINVAL;
>
> acpm_pmic_init_bulk_read_cmd(cmd, type, reg, chan, count);
> - acpm_pmic_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id);
> + acpm_pmic_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> @@ -159,7 +159,7 @@ int acpm_pmic_write_reg(const struct acpm_handle *handle,
> int ret;
>
> acpm_pmic_init_write_cmd(cmd, type, reg, chan, value);
> - acpm_pmic_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id);
> + acpm_pmic_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> @@ -199,7 +199,7 @@ int acpm_pmic_bulk_write(const struct acpm_handle *handle,
> return -EINVAL;
>
> acpm_pmic_init_bulk_write_cmd(cmd, type, reg, chan, count, buf);
> - acpm_pmic_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id);
> + acpm_pmic_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> @@ -229,7 +229,7 @@ int acpm_pmic_update_reg(const struct acpm_handle *handle,
> int ret;
>
> acpm_pmic_init_update_cmd(cmd, type, reg, chan, value, mask);
> - acpm_pmic_set_xfer(&xfer, cmd, sizeof(cmd), acpm_chan_id);
> + acpm_pmic_set_xfer(&xfer, cmd, ARRAY_SIZE(cmd), acpm_chan_id);
>
> ret = acpm_do_xfer(handle, &xfer);
> if (ret)
> diff --git a/drivers/firmware/samsung/exynos-acpm.c b/drivers/firmware/samsung/exynos-acpm.c
> index 0cb269c70460..242745e8394c 100644
> --- a/drivers/firmware/samsung/exynos-acpm.c
> +++ b/drivers/firmware/samsung/exynos-acpm.c
> @@ -205,7 +205,7 @@ static void acpm_get_saved_rx(struct acpm_chan *achan,
> rx_seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, rx_data->cmd[0]);
>
> if (rx_seqnum == tx_seqnum) {
> - memcpy(xfer->rxd, rx_data->cmd, xfer->rxlen);
> + memcpy(xfer->rxd, rx_data->cmd, xfer->rxcnt * sizeof(*xfer->rxd));
> clear_bit(rx_seqnum - 1, achan->bitmap_seqnum);
> }
> }
> @@ -259,7 +259,7 @@ static int acpm_get_rx(struct acpm_chan *achan, const struct acpm_xfer *xfer)
> if (rx_data->response) {
> if (rx_seqnum == tx_seqnum) {
> __ioread32_copy(xfer->rxd, addr,
> - xfer->rxlen / 4);
> + xfer->rxcnt);
now __ioread32_copy fits on a single line, without bypassing 80 chars
> rx_set = true;
> clear_bit(seqnum, achan->bitmap_seqnum);
> } else {
> @@ -270,7 +270,7 @@ static int acpm_get_rx(struct acpm_chan *achan, const struct acpm_xfer *xfer)
> * after the response is copied to the request.
> */
> __ioread32_copy(rx_data->cmd, addr,
> - xfer->rxlen / 4);
> + xfer->rxcnt);
> }
> } else {
> clear_bit(seqnum, achan->bitmap_seqnum);
> @@ -425,7 +425,9 @@ int acpm_do_xfer(const struct acpm_handle *handle, const struct acpm_xfer *xfer)
>
> achan = &acpm->chans[xfer->acpm_chan_id];
>
> - if (!xfer->txd || xfer->txlen > achan->mlen || xfer->rxlen > achan->mlen)
> + if (!xfer->txd || (xfer->txcnt * sizeof(*xfer->txd) > achan->mlen))
> + return -EINVAL;
> + if (xfer->rxcnt * sizeof(*xfer->rxd) > achan->mlen)
> return -EINVAL;
how about:
if (!xfer->txd ||
(xfer->txcnt * sizeof(*xfer->txd) > achan->mlen) ||
(xfer->rxcnt * sizeof(*xfer->rxd) > achan->mlen))
return -EINVAL;
>
> if (!achan->poll_completion) {
> @@ -448,7 +450,7 @@ int acpm_do_xfer(const struct acpm_handle *handle, const struct acpm_xfer *xfer)
>
> /* Write TX command. */
> __iowrite32_copy(achan->tx.base + achan->mlen * tx_front,
> - xfer->txd, xfer->txlen / 4);
> + xfer->txd, xfer->txcnt);
>
> /* Advance TX front. */
> writel(idx, achan->tx.front);
> diff --git a/drivers/firmware/samsung/exynos-acpm.h b/drivers/firmware/samsung/exynos-acpm.h
> index 2d14cb58f98c..422fbcac7284 100644
> --- a/drivers/firmware/samsung/exynos-acpm.h
> +++ b/drivers/firmware/samsung/exynos-acpm.h
> @@ -10,8 +10,8 @@
> struct acpm_xfer {
> const u32 *txd;
> u32 *rxd;
> - size_t txlen;
> - size_t rxlen;
> + size_t txcnt;
> + size_t rxcnt;
> unsigned int acpm_chan_id;
> };
>
>
next prev parent reply other threads:[~2026-02-19 10:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-14 12:39 [PATCH RFT 0/3] firmware: exynos-acpm: Use __counted_by() Krzysztof Kozlowski
2026-02-14 12:39 ` [PATCH RFT 1/3] firmware: exynos-acpm: Use unsigned int for acpm_pmic_linux_errmap index Krzysztof Kozlowski
2026-02-19 10:16 ` Tudor Ambarus
2026-02-14 12:39 ` [PATCH RFT 2/3] firmware: exynos-acpm: Count number of commands in acpm_xfer Krzysztof Kozlowski
2026-02-14 19:13 ` Krzysztof Kozlowski
2026-02-19 10:27 ` Tudor Ambarus [this message]
2026-02-19 10:31 ` Krzysztof Kozlowski
2026-02-14 12:39 ` [PATCH RFT 3/3] firmware: exynos-acpm: Count acpm_xfer buffers with __counted_by_ptr Krzysztof Kozlowski
2026-02-19 11:20 ` Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c9d056fb-b2ae-4631-a2b5-f55f214adecb@linaro.org \
--to=tudor.ambarus@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=gustavoars@kernel.org \
--cc=justinstitt@google.com \
--cc=kees@kernel.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=nick.desaulniers+lkml@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).