From: Prasad Pandit <ppandit@redhat.com>
To: linux-scsi@vger.kernel.org
Cc: GR-QLogic-Storage-Upstream@marvell.com,
Nilesh Javali <njavali@marvell.com>,
Arnd Bergmann <arnd@kernel.org>,
Prasad Pandit <pjp@fedoraproject.org>
Subject: [PATCH] scsi: qla2xxx: indent help text
Date: Thu, 21 Mar 2024 16:54:38 +0530 [thread overview]
Message-ID: <20240321112438.1759347-1-ppandit@redhat.com> (raw)
From: Prasad Pandit <pjp@fedoraproject.org>
Fix indentation of config option's help text by adding
leading spaces. Generally help text is indented by couple
of spaces more beyond the leading tab <\t> character.
It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
---
drivers/scsi/Kconfig | 4 ++--
drivers/scsi/qla2xxx/Kconfig | 42 +++++++++++++++++++-----------------
2 files changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9ce27092729c..a9704b05ce10 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -53,7 +53,7 @@ config SCSI_ESP_PIO
config SCSI_NETLINK
bool
- default n
+ default n
depends on NET
config SCSI_PROC_FS
@@ -313,7 +313,7 @@ config ISCSI_TCP
config ISCSI_BOOT_SYSFS
tristate "iSCSI Boot Sysfs Interface"
- default n
+ default n
help
This option enables support for exposing iSCSI boot information
via sysfs to userspace. If you wish to export this information,
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index a584708d3056..a8b4314bfd6e 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -7,29 +7,29 @@ config SCSI_QLA_FC
select FW_LOADER
select BTREE
help
- This qla2xxx driver supports all QLogic Fibre Channel
- PCI and PCIe host adapters.
+ This qla2xxx driver supports all QLogic Fibre Channel
+ PCI and PCIe host adapters.
- By default, firmware for the ISP parts will be loaded
- via the Firmware Loader interface.
+ By default, firmware for the ISP parts will be loaded
+ via the Firmware Loader interface.
- ISP Firmware Filename
- ---------- -----------------
- 21xx ql2100_fw.bin
- 22xx ql2200_fw.bin
- 2300, 2312, 6312 ql2300_fw.bin
- 2322, 6322 ql2322_fw.bin
- 24xx, 54xx ql2400_fw.bin
- 25xx ql2500_fw.bin
+ ISP Firmware Filename
+ ---------- -----------------
+ 21xx ql2100_fw.bin
+ 22xx ql2200_fw.bin
+ 2300, 2312, 6312 ql2300_fw.bin
+ 2322, 6322 ql2322_fw.bin
+ 24xx, 54xx ql2400_fw.bin
+ 25xx ql2500_fw.bin
- Upon request, the driver caches the firmware image until
- the driver is unloaded.
+ Upon request, the driver caches the firmware image until
+ the driver is unloaded.
- Firmware images can be retrieved from:
+ Firmware images can be retrieved from:
- http://ldriver.qlogic.com/firmware/
+ http://ldriver.qlogic.com/firmware/
- They are also included in the linux-firmware tree as well.
+ They are also included in the linux-firmware tree as well.
config TCM_QLA2XXX
tristate "TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs"
@@ -38,13 +38,15 @@ config TCM_QLA2XXX
select BTREE
default n
help
- Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
+ Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+
+ series target mode HBAs.
if TCM_QLA2XXX
config TCM_QLA2XXX_DEBUG
bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
default n
help
- Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
- This will include code to enable the SCSI command jammer
+ Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for
+ QLogic 24xx+ series target mode HBAs.
+ This will include code to enable the SCSI command jammer.
endif
--
2.44.0
next reply other threads:[~2024-03-21 11:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 11:24 Prasad Pandit [this message]
2024-04-01 5:10 ` [PATCH] scsi: qla2xxx: indent help text P J P
2024-04-12 2:05 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240321112438.1759347-1-ppandit@redhat.com \
--to=ppandit@redhat.com \
--cc=GR-QLogic-Storage-Upstream@marvell.com \
--cc=arnd@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=njavali@marvell.com \
--cc=pjp@fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).