On Thu, May 09, 2024 at 07:17:31PM +0200, Christoph Fritz wrote:
> Add dt-bindings for hexDEV hexLINSER serial LIN adapters. These adapters
> are basically just LIN transceivers that are mostly hard-wired to serial
> devices.
> 
> Signed-off-by: Christoph Fritz <christoph.fritz@hexdev.de>
> ---
>  .../bindings/net/can/hexdev,hex-linser.yaml   | 32 +++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/can/hexdev,hex-linser.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/can/hexdev,hex-linser.yaml b/Documentation/devicetree/bindings/net/can/hexdev,hex-linser.yaml
> new file mode 100644
> index 0000000000000..42dce3348f73c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/hexdev,hex-linser.yaml
> @@ -0,0 +1,32 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/hexdev,hex-linser.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: hexDEV hexLINSER serial LIN adapter
> +
> +description:
> +  LIN transceiver, mostly hard-wired to a serial device, used for communication
> +  on a LIN bus.
> +  For more details on the adapter, visit <https://hexdev.de/hexlin#hexLINSER>.

I figured I should check in firefox this time, link works fine :)

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.