* IO APIC
@ 2003-02-07 7:57 "Ruchatz, Jürgen"
0 siblings, 0 replies; 8+ messages in thread
From: "Ruchatz, Jürgen" @ 2003-02-07 7:57 UTC (permalink / raw
To: 'linux-smp@vger.kernel.org'
[-- Attachment #1: Type: text/plain, Size: 1525 bytes --]
Hello,
we have a Linux Server with
Intel Clearwater Motherboard SE7500CW2SC
with dual XEON 2.4 processor.
The Linux Version is SUSE Enterprise Server 7 for IA32.
In the boot.msg I find the following lines:
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02008000
<7>....... : physical APIC id: 02
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
....
<4>
<7>IO APIC #3......
<7>.... register #00: 04000000
<7>....... : physical APIC id: 04
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 04000000
<7>....... : arbitration: 04
Here is the complete boot log.
<<boot.msg.txt>>
Does the error message indicate a problem which
should be solved (leading to instability of the system...)?
The machine works as a SAP Server, so stability is important
for us.
If you need further details please let me know.
With Best Regards
W. Altendorf GmbH
Germany
Juergen Ruchatz
[-- Attachment #2: boot.msg.txt --]
[-- Type: text/plain, Size: 31726 bytes --]
Inspecting /boot/System.map-2.4.7-64GB-SMP
Loaded 11438 symbols from /boot/System.map-2.4.7-64GB-SMP.
Symbols match kernel version 2.4.7.
Loaded 40 symbols from 3 modules.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.7-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Fri Aug 17 03:20:05 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
<4> BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
<4> BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data)
<4> BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS)
<4> BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable)
<4> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000f6670
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f7000 reserved twice.
<4>hm, page 0009c000 reserved twice.
<4>hm, page 0009d000 reserved twice.
<4>On node 0 totalpages: 262016
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 32640 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: Product ID: SE7500CW2 APIC at: 0xFEE00000
<4>Processor #0 Unknown CPU [15:2] APIC version 20
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> SEP present.
<4> MTRR present.
<4> PGE present.
<4> MCA present.
<4> CMOV present.
<4> PAT present.
<4> PSE present.
<4> Cache Line Flush Instruction present.
<4> Debug Trace and EMON Store present.
<4> ACPI Thermal Throttle Registers present.
<4> MMX present.
<4> FXSR present.
<4> XMM present.
<4> Willamette New Instructions present.
<4> Self Snoop present.
<4> Thermal Monitor present.
<4> Bootup CPU
<4>Processor #6 Unknown CPU [15:2] APIC version 20
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> SEP present.
<4> MTRR present.
<4> PGE present.
<4> MCA present.
<4> CMOV present.
<4> PAT present.
<4> PSE present.
<4> Cache Line Flush Instruction present.
<4> Debug Trace and EMON Store present.
<4> ACPI Thermal Throttle Registers present.
<4> MMX present.
<4> FXSR present.
<4> XMM present.
<4> Willamette New Instructions present.
<4> Self Snoop present.
<4> Thermal Monitor present.
<4>Bus #0 is PCI
<4>Bus #1 is PCI
<4>Bus #2 is PCI
<4>Bus #3 is PCI
<4>Bus #4 is PCI
<4>Bus #5 is ISA
<4>I/O APIC #2 Version 32 at 0xFEC00000.
<4>I/O APIC #3 Version 32 at 0xFEC80000.
<4>I/O APIC #4 Version 32 at 0xFEC80400.
<4>Int: type 3, pol 1, trig 1, bus 5, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 75, APIC ID 2, APIC INT 13
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 09, APIC ID 2, APIC INT 09
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 74, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 7d, APIC ID 2, APIC INT 11
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 0d, APIC ID 2, APIC INT 0d
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 0, pol 1, trig 1, bus 5, IRQ 0f, APIC ID 2, APIC INT 0f
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 04, APIC ID 3, APIC INT 00
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 08, APIC ID 3, APIC INT 04
<4>Int: type 0, pol 3, trig 3, bus 4, IRQ 08, APIC ID 2, APIC INT 13
<4>Int: type 0, pol 3, trig 3, bus 4, IRQ 0c, APIC ID 2, APIC INT 15
<4>Int: type 0, pol 3, trig 3, bus 4, IRQ 14, APIC ID 2, APIC INT 17
<4>Lint: type 3, pol 1, trig 1, bus 5, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 1, trig 1, bus 5, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>mapped IOAPIC to ffffc000 (fec80000)
<4>mapped IOAPIC to ffffb000 (fec80400)
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=801 BOOT_FILE=/boot/vmlinuz
<6>Initializing CPU#0
<4>Detected 2599.744 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 5190.45 BogoMIPS
<4>Memory: 1026816k/1048064k available (1345k kernel code, 20780k reserved, 962k data, 124k init, 130496k highmem)
<4>Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<7>CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<7>CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07
<4>per-CPU timeslice cutoff: 1462.80 usecs.
<4>Getting VERSION: 50014
<4>Getting VERSION: 50014
<4>Getting ID: 0
<4>Getting ID: f000000
<4>Getting LVT0: 700
<4>Getting LVT1: 400
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>CPU present map: 41
<4>Booting processor 1/6 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Waiting for send to finish...
<4>+Deasserting INIT.
<4>Waiting for send to finish...
<4>+#startup loops: 2.
<4>Sending STARTUP #1.
<4>After apic_write.
<6>Initializing CPU#1
<4>CPU#1 (phys ID: 6) waiting for CALLOUT
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 5190.45 BogoMIPS
<4>Stack at about c211bfbc
<7>CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
<4>OK.
<4>CPU1: Intel(R) Xeon(TM) CPU 2.60GHz stepping 07
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (10380.90 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<6>...changing IO-APIC physical APIC ID to 3 ... ok.
<6>...changing IO-APIC physical APIC ID to 4 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 2-20, 2-22, 3-1, 3-2, 3-3, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
<6>..TIMER: vector=31 pin1=2 pin2=0
<7>number of MP IRQ sources: 21.
<7>number of IO-APIC #2 registers: 24.
<7>number of IO-APIC #3 registers: 24.
<7>number of IO-APIC #4 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02008000
<7>....... : physical APIC id: 02
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 003 03 0 0 0 0 0 1 1 51
<7> 07 003 03 0 0 0 0 0 1 1 59
<7> 08 003 03 0 0 0 0 0 1 1 61
<7> 09 003 03 0 0 0 0 0 1 1 69
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 003 03 0 0 0 0 0 1 1 71
<7> 0d 003 03 0 0 0 0 0 1 1 79
<7> 0e 003 03 0 0 0 0 0 1 1 81
<7> 0f 003 03 0 0 0 0 0 1 1 89
<7> 10 003 03 1 1 0 1 0 1 1 91
<7> 11 003 03 1 1 0 1 0 1 1 99
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 003 03 1 1 0 1 0 1 1 A1
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 003 03 1 1 0 1 0 1 1 A9
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 003 03 1 1 0 1 0 1 1 B1
<4>
<7>IO APIC #3......
<7>.... register #00: 04000000
<7>....... : physical APIC id: 04
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 04000000
<7>....... : arbitration: 04
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 003 03 1 1 0 1 0 1 1 B9
<7> 01 000 00 1 0 0 0 0 0 0 00
<7> 02 000 00 1 0 0 0 0 0 0 00
<7> 03 000 00 1 0 0 0 0 0 0 00
<7> 04 003 03 1 1 0 1 0 1 1 C1
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 000 00 1 0 0 0 0 0 0 00
<7> 07 000 00 1 0 0 0 0 0 0 00
<7> 08 000 00 1 0 0 0 0 0 0 00
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 000 00 1 0 0 0 0 0 0 00
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 000 00 1 0 0 0 0 0 0 00
<7> 0f 000 00 1 0 0 0 0 0 0 00
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<4>
<7>IO APIC #4......
<7>.... register #00: 04000000
<7>....... : physical APIC id: 04
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 04000000
<7>....... : arbitration: 04
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 003 03 1 1 0 1 0 1 1 B9
<7> 01 000 00 1 0 0 0 0 0 0 00
<7> 02 000 00 1 0 0 0 0 0 0 00
<7> 03 000 00 1 0 0 0 0 0 0 00
<7> 04 003 03 1 1 0 1 0 1 1 C1
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 000 00 1 0 0 0 0 0 0 00
<7> 07 000 00 1 0 0 0 0 0 0 00
<7> 08 000 00 1 0 0 0 0 0 0 00
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 000 00 1 0 0 0 0 0 0 00
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 000 00 1 0 0 0 0 0 0 00
<7> 0f 000 00 1 0 0 0 0 0 0 00
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<7>IRQ16 -> 16
<7>IRQ17 -> 17
<7>IRQ19 -> 19
<7>IRQ21 -> 21
<7>IRQ23 -> 23
<7>IRQ24 -> 0
<7>IRQ28 -> 4
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 2599.7350 MHz.
<4>..... host bus clock speed is 99.9897 MHz.
<4>cpu: 0, clocks: 999897, slice: 333299
<4>CPU0<T0:999888,T1:666576,D:13,S:333299,C:999897>
<4>cpu: 1, clocks: 999897, slice: 333299
<4>CPU1<T0:999888,T1:333280,D:10,S:333299,C:999897>
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>PCI: PCI BIOS revision 2.10 entry at 0xfd921, last bus=4
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 1: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router default [8086/2480] at 00:1f.0
<4>querying PCI -> IRQ mapping bus:0, slot:29, pin:0.
<6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16
<4>querying PCI -> IRQ mapping bus:0, slot:29, pin:1.
<6>PCI->APIC IRQ transform: (B0,I29,P1) -> 19
<4>querying PCI -> IRQ mapping bus:0, slot:31, pin:0.
<6>PCI->APIC IRQ transform: (B0,I31,P0) -> 17
<4>querying PCI -> IRQ mapping bus:0, slot:31, pin:1.
<6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<4>querying PCI -> IRQ mapping bus:2, slot:1, pin:0.
<6>PCI->APIC IRQ transform: (B2,I1,P0) -> 24
<4>querying PCI -> IRQ mapping bus:2, slot:2, pin:0.
<6>PCI->APIC IRQ transform: (B2,I2,P0) -> 28
<4>querying PCI -> IRQ mapping bus:4, slot:2, pin:0.
<6>PCI->APIC IRQ transform: (B4,I2,P0) -> 19
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started at Mon Jan 27 15:34:10 2003
Activating swap-devices in /etc/fstab...
doneChecking file systems...
Parallelizing fsck version 1.19a (13-Jul-2000)
/dev/sda1: clean, 23020/128768 files, 198026/257032 blocks
/dev/sdb5: clean, 12/768544 files, 1305387/1536207 blocks
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
/dev/sda15: clean, 1026/3581088 files, 3713951/7156949 blocks
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
/dev/sda11: clean, 12/2179072 files, 3912157/4353607 blocks
/dev/sda12: clean, 12/2179072 files, 3912157/4353607 blocks
/dev/sda13: clean, 12/2179072 files, 3912157/4353607 blocks
/dev/sda14: clean, 12/2179072 files, 3912157/4353607 blocks
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda5 on /usr type reiserfs (rw)
/dev/sda6 on /var type reiserfs (rw)
/dev/sda15 on /backup type ext2 (rw)
/dev/sda7 on /public type reiserfs (rw)
/dev/sda8 on /usr/sap/trans type reiserfs (rw)
/dev/sda9 on /usr/sap/WAE/DVEBMGS00/work type reiserfs (rw)
/dev/sda11 on /sapdb/WAE/sapdata1 type ext2 (rw)
/dev/sda12 on /sapdb/WAE/sapdata2 type ext2 (rw)
/dev/sda13 on /sapdb/WAE/sapdata3 type ext2 (rw)
/dev/sda14 on /sapdb/WAE/sapdata4 type ext2 (rw)
/dev/sdb5 on /sapdb/WAE/saplog1 type ext2 (rw)
/dev/sdc5 on /sapdb/WAE/dbsys type reiserfs (rw)
/dev/sdc6 on /sapdb/WAE/sapsave type reiserfs (rw)
/dev/sda10 on /htmlhelp type reiserfs (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Starting ldconfig (setting up /etc/ld.so.cache)done
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
done<notice>killproc: kill(26,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>killproc: kill(26,3)
Boot logging started at Mon Jan 27 15:34:19 2003
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>/etc/init.d/rc5.d/S01SuSEfirewall_init start
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall_init start' exits with status 0
<notice>/etc/init.d/rc5.d/S01apmd start
<notice>'/etc/init.d/rc5.d/S01apmd start' exits with status 0
<notice>/etc/init.d/rc5.d/S01dummy start
<notice>'/etc/init.d/rc5.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc5.d/S01i4l_hardware start
<notice>'/etc/init.d/rc5.d/S01i4l_hardware start' exits with status 0
<notice>/etc/init.d/rc5.d/S01idedma start
<notice>'/etc/init.d/rc5.d/S01idedma start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S02dhclient start
<notice>'/etc/init.d/rc5.d/S02dhclient start' exits with status 0
<notice>/etc/init.d/rc5.d/S02i4l start
<notice>'/etc/init.d/rc5.d/S02i4l start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network device eth0
done<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06pcmcia start
<notice>'/etc/init.d/rc5.d/S06pcmcia start' exits with status 6
<notice>/etc/init.d/rc5.d/S06pppoed start
<notice>'/etc/init.d/rc5.d/S06pppoed start' exits with status 0
<notice>/etc/init.d/rc5.d/S07route start
Setting up routing (using /etc/route.conf)done
<notice>'/etc/init.d/rc5.d/S07route start' exits with status 0
<notice>/etc/init.d/rc5.d/S08SuSEfirewall_setup start
<notice>'/etc/init.d/rc5.d/S08SuSEfirewall_setup start' exits with status 0
<notice>/etc/init.d/rc5.d/S08portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S08portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S08sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S08sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S08syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>'/etc/init.d/rc5.d/S08syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S08xfs start
<notice>'/etc/init.d/rc5.d/S08xfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09lpd start
Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S09lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09nfs start
<notice>'/etc/init.d/rc5.d/S09nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09usbmgr start
Starting service usbmgr <notice>startproc: execve (/sbin/usbmgr) [ /sbin/usbmgr ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/usbmgr ]
done
<notice>'/etc/init.d/rc5.d/S09usbmgr start' exits with status 0
<notice>/etc/init.d/rc5.d/S09wvdial.dod start
<notice>'/etc/init.d/rc5.d/S09wvdial.dod start' exits with status 0
<notice>/etc/init.d/rc5.d/S10at start
Starting service at daemon:<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S10at start' exits with status 0
<notice>/etc/init.d/rc5.d/S10fbset start
<notice>'/etc/init.d/rc5.d/S10fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S10kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S10kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S10raw start
<notice>'/etc/init.d/rc5.d/S10raw start' exits with status 0
<notice>/etc/init.d/rc5.d/S10sendmail start
<notice>'/etc/init.d/rc5.d/S10sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S10smb start
Starting SAMBA nmbd :<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
Starting SAMBA smbd :<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
<notice>'/etc/init.d/rc5.d/S10smb start' exits with status 0
<notice>/etc/init.d/rc5.d/S10xntpd start
<notice>'/etc/init.d/rc5.d/S10xntpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S10ypbind start
<notice>'/etc/init.d/rc5.d/S10ypbind start' exits with status 0
<notice>/etc/init.d/rc5.d/S11autofs start
<notice>'/etc/init.d/rc5.d/S11autofs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S11fam start
<notice>'/etc/init.d/rc5.d/S11fam start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nfsserver start
Starting kernel based NFS server<notice>startproc: execve (/sbin/rpc.statd) [ /sbin/rpc.statd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/rpc.statd ]
<notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
done
<notice>'/etc/init.d/rc5.d/S11nfsserver start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S11nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smbfs start
<notice>'/etc/init.d/rc5.d/S11smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11xdm start
Starting service kdm<notice>startproc: execve (/opt/kde2/bin/kdm) [ /opt/kde2/bin/kdm ], [ PWD=/ BOOT_FILE=/boot/vmlinuz LC_MESSAGES= HOSTNAME=wa09 CONSOLE=/dev/console RC_LANG=de_DE@euro PREVLEVEL=N SUSE_DOC_HOST=localhost AUTOBOOT=YES LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=37 LANG=de_DE@euro LC_NUMERIC= SHLVL=2 COLUMNS=100 LC_CTYPE=de_DE@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 FROM_HEADER=wa09.altendorf.de LC_MONETARY= INIT_VERSION=sysvinit-2.78 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde2/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S11xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=wa09 CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=37 SHLVL=2 COLUMNS=100 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
<notice>/etc/init.d/rc5.d/S21SuSEfirewall_final start
<notice>'/etc/init.d/rc5.d/S21SuSEfirewall_final start' exits with status 0
<notice>/etc/init.d/rc5.d/S21alsasound start
<notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S21sapr3 start
Setting kernel parameterskernel.shmmax = 1073741824
kernel.msgmni = 1024
done
<notice>'/etc/init.d/rc5.d/S21sapr3 start' exits with status 0
<notice>/etc/init.d/rc5.d/S22personal-firewall.final start
Starting personal-firewall (final) [not active]unused
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: personal-firewall.initial pcmcia personal-firewall.final
<notice>'/etc/init.d/rc5.d/S22personal-firewall.final start' exits with status 6
<notice>killproc: kill(126,3)
^ permalink raw reply [flat|nested] 8+ messages in thread
* io apic
@ 2003-07-03 18:44 raptor
0 siblings, 0 replies; 8+ messages in thread
From: raptor @ 2003-07-03 18:44 UTC (permalink / raw
To: linux-smp
I saw a message so that i have sent this so I'm sending it :")
This is Gentoo Linux installation :
Linux bugsbunny.tvskat.net 2.4.20-gentoo-r1 #10 23 11:28:42 EEST 2003 i686 GenuineIntel
Celeron 2GHZ@2.5GHz (not smp)
Just upgraded my mobo to Gygabyte GA-8IPE1000 (Intel 865PE chipset), so that it can
be upgrade problem ...
#dmesg
...
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-6, 2-9, 2-11, 2-20, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 25.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 001 01 0 0 0 0 0 1 1 51
08 001 01 0 0 0 0 0 1 1 59
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 61
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 69
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
10 001 01 1 1 0 1 0 1 1 89
11 001 01 1 1 0 1 0 1 1 91
12 001 01 1 1 0 1 0 1 1 99
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A9
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2505.0323 MHz.
..... host bus clock speed is 125.0266 MHz.
cpu: 0, clocks: 125266, slice: 62633
CPU0<T0:125264,T1:62624,D:7,S:62633,C:125266>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfa2e0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I1,P0) -> 21
PCI->APIC IRQ transform: (B2,I1,P0) -> 21
PCI->APIC IRQ transform: (B2,I3,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 18
^ permalink raw reply [flat|nested] 8+ messages in thread
* IO_APIC
@ 2005-04-25 21:03 Kline, Larry
2005-04-25 21:26 ` IO_APIC Randy.Dunlap
0 siblings, 1 reply; 8+ messages in thread
From: Kline, Larry @ 2005-04-25 21:03 UTC (permalink / raw
To: linux-smp; +Cc: Kline, Larry
[-- Attachment #1: Type: text/plain, Size: 18151 bytes --]
I can no longer bring X windows up on this system. I can get the red splash screen, from the wallpaper selection, to display for approx. 5 seconds, then the system defaults to a non-windows interface.
MY_LASHUP:
IBM x-206 e-serve
P4 3.5 G processor
256 Mb ECC DDR UDIMM memory
80 Gb. SATA SIMPLE SWAP HDD
Installed 10/100/1000 Ehternet
Suse Linux Enterprise Server 8.0
lspci_out:
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:03.0 PCI bridge: Intel Corp.82875P Processor to PCI to CSA Bridge (rev 02)
00:1c.0 PCI bridge: Intel Corp.: Unknown device 25ae (rev 02)
00:1d.0 USB Controller: Intel Corp.: Unknown device 25a9 (rev 02)
00:1d.1 USB Controller: Intel Corp.: Unknown device 25aa (rev 02)
00:1d.4 System peripheral: Intel Corp.: Unknown device 25ab (rev 02)
00:1d.5 PIC: Intel Corp.: Unknown device 25ac (rev 02)
00:1d.7 USB Controller: Intel Corp.: Unknown device 25ad (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 0a)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 25a1 (rev 02)
00:1f.2 IDE interface: Intel Corp.: Unknown device 25a3 (rev 02)
00:1f.3 SMBus: Intel Corp.: Unknown device 25a4 (rev 02)
02:01.0 Ethernet controller: Intel Corp.: Unknown device 1075
04:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
lsmod_out:
Module Size Used by Not tainted
radeon 113408 0 (unused)
e1000 68608 1
videodev 6400 0 (autoclean)
nfsd 83568 4 (autoclean)
ide-cd 32096 0 (autoclean)
cdrom 29152 0 (autoclean) [ide-cd]
isa-pnp 33244 0 (unused)
ipv6 270716 -1 (autoclean)
key 72980 0 (autoclean) [ipv6]
joydev 5536 0 (unused)
evdev 4224 0 (unused)
input 3744 0 [joydev evdev]
usb-uhci 24812 0 (unused)
ehci-hcd 18728 0 (unused)
usbcore 66944 1 [usb-uhci ehci-hcd]
lvm-mod 68256 0 (autoclean)
reiserfs 225716 1
insmod_redeon_out:
Using /lib/modules/2.4.21-138-smp/kernel/drivers/char/drm/radeon.o
dmesg_out:
00000
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
per-CPU timeslice cutoff: 2926.02 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5989.99 BogoMIPS
Monitor/Mwait feature present.
CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Total of 2 processors activated (11979.98 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9,
3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3000.5113 MHz.
..... host bus clock speed is 200.0339 MHz.
cpu: 0, clocks: 2000339, slice: 666779
CPU0<T0:2000336,T1:1333552,D:5,S:666779,C:2000339>
cpu: 1, clocks: 2000339, slice: 666779
CPU1<T0:2000336,T1:666768,D:10,S:666779,C:2000339>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfd73f, last bus=4
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) Mode:1 Active:0
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSA_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 *11 14 15)
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) Mode:1 Active:1
00:00:1f[A] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) Mode:1 Active:1
00:00:1f[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) Mode:1 Active:1
00:00:1d[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) Mode:1 Active:1
00:00:1d[B] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) Mode:1 Active:1
00:00:1d[D] -> 2-23 -> IRQ 23
Pin 2-18 already programmed
IOAPIC[1]: Set PCI routing entry (3-0 -> 0xd1 -> IRQ 24) Mode:1 Active:1
00:03:01[A] -> 3-0 -> IRQ 24
IOAPIC[1]: Set PCI routing entry (3-1 -> 0xd9 -> IRQ 25) Mode:1 Active:1
00:03:01[B] -> 3-1 -> IRQ 25
IOAPIC[1]: Set PCI routing entry (3-2 -> 0xe1 -> IRQ 26) Mode:1 Active:1
00:03:01[C] -> 3-2 -> IRQ 26
IOAPIC[1]: Set PCI routing entry (3-3 -> 0xe9 -> IRQ 27) Mode:1 Active:1
00:03:01[D] -> 3-3 -> IRQ 27
Pin 3-1 already programmed
Pin 3-2 already programmed
Pin 3-0 already programmed
Pin 3-3 already programmed
Pin 3-3 already programmed
Pin 2-16 already programmed
IOAPIC[0]: Set PCI routing entry (2-22 -> 0x32 -> IRQ 22) Mode:1 Active:1
00:04:03[A] -> 2-22 -> IRQ 22
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
IOAPIC[0]: Set PCI routing entry (2-20 -> 0x3a -> IRQ 20) Mode:1 Active:1
00:04:07[A] -> 2-20 -> IRQ 20
IOAPIC[0]: Set PCI routing entry (2-21 -> 0x42 -> IRQ 21) Mode:1 Active:1
00:04:07[B] -> 2-21 -> IRQ 21
Pin 2-22 already programmed
Pin 2-23 already programmed
Pin 2-21 already programmed
Pin 2-22 already programmed
Pin 2-23 already programmed
Pin 2-20 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 16348
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xe0000000, mapped to 0xd081f000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:4e14
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... found (1024x768, 19361 bytes, v2).
Console: switching to colour frame buffer device 125x42
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Enterprise Southbridge-SATA: IDE controller at PCI slot 00:1f.2
Enterprise Southbridge-SATA: chipset revision 2
Enterprise Southbridge-SATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1470-0x1477, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1478-0x147f, BIOS settings: hdc:pio, hdd:DMA
hda: LTN486S, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080M0, ATA DISK drive
blk: queue c047d86c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 156312576 sectors (80032 MB) w/7936KiB Cache, CHS=155072/16/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hdd: hdd1 hdd2
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 434k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide1(22,66)) ...
for (ide1(22,66))
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { DriveStatusError }
hdd: cache flushing failed. disable write back cacheing for journalled file systems
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { DriveStatusError }
hdd: cache flushing failed. disable write back cacheing for journalled file systems
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 184k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c1829000
LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 793760k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. Enterprise Southbridge (D29-F7) USB 2.0 EHCI
ehci_hcd 00:1d.7: irq 23, pci mem d1acc400
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 32.
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb-uhci.c: $Revision: 1.275 $ time 01:31:29 Oct 31 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1400, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1420, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
ide-floppy driver 0.99.newide
hda: attached ide-cdrom driver.
hda: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Linux video capture interface: v1.00
Intel(R) PRO/1000 Network Driver - version 5.2.22.1
Copyright (c) 1999-2003 Intel Corporation.
PCI: Setting latency timer of device 02:01.0 to 64
eth0: Intel(R) PRO/1000 Network Connection
e1000: eth0 NIC Link is Up 10 Mbps Half Duplex
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
eth0: no IPv6 routers present
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: no supported devices found.
Attched:
rpm -qa > rpm_qa.out <<rpm_qa.out>>
/etc/X11/Xf86Config
Any help would be appreciated as I am, for all intents and purposes, a newbie to Linux.
[-- Attachment #2: rpm_qa.out --]
[-- Type: application/octet-stream, Size: 16486 bytes --]
aide-0.9-32
filesystem-2002.9.2-56
gcc-c++-3.2.2-38
ghostscript-fonts-other-7.05.3-62
gdm2-2.4.0.11-226
gdb-5.3-57
gnome-mime-data-2.0.0-180
freetype2-2.0.9-87
netscape-plugins-4.80-22
perl-DateManip-5.40-244
perl-HTML-Tagset-3.03-300
perl-Tie-IxHash-1.21-334
perl-Time-Period-1.20-36
perl-TimeDate-1.10-332
perl-URI-1.20-39
perl-XML-Writer-0.4-254
postgresql-jdbc-7.2.2-35
sash-3.4-504
saxident-1.1-428
scslog-2.3-302
terminfo-5.2-402
libgcc-3.2.2-38
xfntscl-4.2.0-188
xmodules-4.2.0-188
icons-101.0-577
intlfnts-1.2-427
man-pages-1.53-32
metacity-themes-0.1-54
providers-2002.9.8-12
words-words.2-284
perl-XML-DOM-1.39-95
ddrescue-1.02-230
dhcp-tools-1.2-224
diffutils-2.8.1-49
dos2unix-3.1-29
dosfstools-2.8-296
bzip2-1.0.2-51
awesfx-0.4.4a-215
bing-1.0.4-610
binutils-2.12.90.0.15-50
bonnie-1.4-75
ash-0.2-641
acl-2.0.19-76
cdparanoia-IIIalpha9.8-287
compartm-1.1-32
cpio-2.5-54
glidectl-0.3-683
ctags-2002.7.18-34
gkermit-1.0-450
gle-3.0.6-250
antiword-0.33-69
e2fsprogs-1.28-30
ed-0.2-611
eject-2.0.12-160
cpp-3.2.2-38
expat-1.95.4-41
evlog-devel-1.5.3-83
fillup-1.10-32
findutils-4.1.7-435
fping-2.2b1-569
g3utils-1.1.28-254
gdbm-1.8.0-689
glib-1.2.10-326
glib2-2.0.6-47
glibc-info-2.2.5-213
gmp-4.0-149
gtkglarea-1.2.2-469
hdparm-5.2-33
imap-lib-2001a-159
iptables-1.2.7a-53
ksymoops-2.4.5-68
lha-1.14i-297
libPropList-0.10.1-371
libart_lgpl-2.3.10-53
libcap-1.92-226
libexif-0.5.3-39
libaio-devel-0.3.15-90
libghttp-1.0.9-370
libiodbc-3.0.6-79
libjpeg-6.2.0-481
libmcal-0.6-404
libaio-0.3.15-90
librsvg-1.0.1-672
librsvg2-2.0.1-162
libxcrypt-1.1-54
liby2util-2.6.21-1
linux-atm-2.4.0-157
logsurfer-1.5a-304
lsof-4.64-40
ltrace-0.3.26-46
m4-1.4o-286
make-3.79.1-407
mdadm-1.0.1-37
mktemp-1.5-482
mt_st-0.7-168
mtx-1.2.15-162
ncurses-5.2-402
mysql-shared-3.23.52-106
netacct-0.71-245
netcat-1.10-612
libstdc++-3.2.2-38
netdiag-20010114-139
opie-2.4-293
netdate-1.2-333
patch-2.5.4-308
pax-3.0-155
pbm2l7k-990321-538
pam_smb-1.1.6-500
perl-Crypt-DES-2.03-109
perl-Digest-SHA1-2.01-153
perl-HTML-Parser-3.26-39
perl-gettext-1.01-325
popt-1.6-282
radiusclient-0.3.1-306
rcs-5.7-610
rdist-6.1.5-543
recode-3.6-240
readline-devel-4.3-53
rrdtool-1.0.39-57
rzsz-0.12.20-586
sed-3.02.80-53
slang-1.4.5-53
tar-1.13.25-46
tarfix-1.0-562
tcl-8.4-60
tclx-8.4-37
tcpd-7.6-457
textutils-2.1-39
unace-1.2b-513
unarj-2.43-534
unixODBC-2.2.2-94
usbutils-0.10-41
utempter-0.5.2-142
ttcp-1.4-629
wireless-tools-23-130
xtermset-0.5.1-301
zip-2.3-490
zlib-1.1.4-51
zoo-2.10-602
dhcp-base-3.0.1rc9-43
dialog-0.62-618
dhcp-server-3.0.1rc9-74
atk-1.0.3-66
cdk-4.9.10-158
ckermit-8.0.200-134
bc-1.06-498
unitedlinux-release-1.0-218
gettyps-2.0.7j-436
heartbeat-ldirectord-1.0.4-14
iptraf-2.5.0-166
jfsutils-1.0.24-1
joe-2.9.8-130
libgtop2-2.0.0-232
libidl-0.8.0-87
file-3.37-206
libtiff-3.5.7-156
libxml-1.8.17-104
lukemftp-1.5-330
mtr-0.46-216
libpng-1.2.4-58
ncftp-3.1.3-56
ngrep-1.40-241
orbit-0.5.17-65
perl-Digest-HMAC-1.01-237
perl-XML-Parser-2.31-40
rarpd-1.1-324
perl-XML-Generator-0.91-164
screen-3.9.13-25
talk-0.17-304
varmon-1.0.2-298
xscsi-1.7_2.31_1.05_0.10-63
zsh-4.0.6-30
MyODBC-libiodbc-2.50.39-87
MyODBC-unixODBC-2.50.39-96
db-4.0.14-194
bash-2.05b-50
alice-compat-0.21-167
dump-0.4b31-26
seccheck-2.0-247
gd-1.8.4-401
ethtool-1.7cvs-26
gfxboot-1.9-59
gtk-1.2.10-463
imwheel-0.9.5-631
libungif-4.1.0b1-190
lsb-runtime-1.2-37
openmotif-2.2.2-124
pam_krb5-1.0.3-274
plotutils-2.4.1-179
sablot-0.82-123
saxtools-2.2-709
sendmail-devel-8.12.6-109
t1lib-1.3.1-120
umsprogs-1.13-100
unclutter-8-435
units-1.74-52
unrar-3.00-53
vlan-1.6-74
xaw3d-1.5-655
xled-1.3.1-987
xloader-4.2.0-188
xlock-5.03-229
TraceToolkit-0.9.5-45
db-utils-4.0.14-194
devs-2002.10.4-9
dhcpcd-1.3.22pl1-129
dosbootdisk-1.0-333
libinet6-20030106-18
audiofile-0.2.3-172
cracklib-2.7-716
aaa_skel-2002.10.14-1
acl-devel-2.0.19-76
ghostscript-fonts-std-7.05.3-62
arpwatch-2.1a11-203
fltk-1.1.0rc5-50
freetype-1.3.1-690
gal-0.19.3-155
gawk-3.1.1-126
gnome-common-1.2.4-275
gnuplot-3.7.1-595
grep-2.5.1-84
gxmhtml-1.4.1.7-134
gzip-1.3-326
heartbeat-stonith-1.0.4-14
htdig-3.1.6-67
hwinfo-5.62-1
imlib-1.9.10-499
inetd-2.0-93
heartbeat-pils-1.0.4-14
java2-jre-1.3.1-524
glibc-2.2.5-213
less-376-31
libgimpprint-4.3.3-42
liblcms-1.09-42
libmikmod-3.1.10-136
libnet-1.0.2a-319
libogg-1.0-43
libtool-1.4.2-347
libunicode-0.4-396
libusb-0.1.5-129
libxml2-2.4.23-117
logrotate-3.5.9-198
makedev-2.6-152
mgetty-1.1.28-254
minicom-2.00.0-147
mm-1.2.1-38
mod_php4-servlet-4.2.2-287
mozilla-mail-1.4-98
mtools-3.9.8-454
mtr-gtk-0.46-216
mysql-client-3.23.52-106
nmap-3.00-54
nn-6.6.4-45
pango-1.0.4-68
pcre-3.9-131
pdksh-5.2.14-532
aaa_base-2003.3.27-55
postgresql-odbc-7.2.2-35
procmail-3.15.1-324
scsi-changer-0.20-106
statserial-1.1-325
syslogd-1.4.1-340
tcpdump-3.7.1-327
tk-8.4-60
tn5250-0.16.5-32
strace-4.4.98-57
usbview-1.0-443
wdiff-0.5.2-408
reiserfs-3.6.9-44
xdevel-4.2.0-188
whois-4.5.29-94
xibod-2.0-420
xosview-1.8.0-62
yp-tools-2.7-60
netcfg-2002.9.4-13
yast2-theme-UnitedLinux-2.6.8-0
dmapi-2.0.5-33
calamaris-2.50-40
blt-2.4y-81
enscript-1.6.2-543
esound-0.2.28-69
expect-5.34-192
finger-1.1-114
finger-server-1.1-114
gcal-3.01-326
gpg-1.0.7-94
groff-1.17.2-403
gtk2-2.0.6-73
icmpinfo-1.11-307
itcl-3.3-37
java2-1.3.1-524
kdebase3-nsplugin-3.0.3-122
libmng-1.0.4-48
libvorbis-1.0-44
libxslt-1.0.19-125
lilo-22.3.2-57
mh-6.8.4debian28-660
mirror-2.9-503
modutils-2.4.25-53
mrtg-2.9.22-41
libpcap-0.7.1-176
oaf-0.6.10-126
openldap2-client-2.1.4-70
sh-utils-2.0-377
perl-Convert-BER-1.31-327
perl-Net-SNMP-4.0.2-35
perl-Tk-800.024-52
perl-libwww-perl-5.65-41
permissions-2002.9.10-9
psutils-p17-612
rsh-0.17-300
saint-3.4.2-440
sensors-2.6.4-33
sgrep-1.92a-574
readline-4.3-53
talk-server-0.17-304
tcsh-6.12.00-54
telnet-1.0-306
telnet-server-1.0-306
texinfo-4.2-48
tix-8.1.3-196
traffic-vis-0.34-325
tripwire-1.2-597
ttmkfdir-19980909-379
vacation-1.2.5-305
unzip-5.50-245
sitar-0.7.2-29
cups-devel-1.1.15-132
curl-7.9.8-54
cups-libs-1.1.15-132
dds2tar-2.5.2-604
cadaver-0.19.1-57
bastille-1.3.0-51
gconf-1.0.9-235
gnome-libs-1.4.1.7-134
gtk2-engines-1.9.0-200
heimdal-lib-0.4e-207
imap-2001a-159
libwnck-0.16-64
linc-0.5.2-54
linux-iscsi-3.4.0.3-95
nagios-plugins-1.3b1-165
pam_radius-1.3.15-45
pciutils-devel-2.1.10-99
postgresql-server-7.2.2-134
rsh-server-0.17-300
yast2-update-2.6.23-2
sitecopy-0.11.4-379
sslwrap-2.10-621
stunnel-3.14-411
suck-4.3.0-228
sudo-1.6.6-51
pciutils-2.1.10-99
type1inst-0.6.1-329
webalizer-2.01-306
xfine-2.8-645
xfsdump-2.1.3-33
compat-2003.1.10-0
cyrus-sasl-1.5.27-280
autoyast2-2.6.44-7
gcc-info-3.2.2-38
gdk-pixbuf-0.18.0-108
gnome-vfs-1.0.5-207
dante-devel-1.1.13-152
guile-1.4.1-51
orbit2-2.4.1-48
perl-Mon-0.11-36
postgresql-libs-7.2.2-35
python-2.2.1-68
python-nothreads-2.2.1-68
ruby-1.6.7-58
sharutils-4.2c-436
vim-6.1-194
wvdial-1.42-234
xchat-1.8.10-59
yast2-transfer-2.6.1-149
UnitedLinux-build-key-1.0-23
suse-build-key-1.0-198
dante-1.1.13-152
dhcp-relay-3.0.1rc9-74
bonobo-activation-1.0.2-153
autofs-3.1.7-556
avmailgate-2.0.1-33
cipe-1.5.4-86
acct-6.3.5-423
ghostscript-x11-7.05.3-62
alsa-driver-0.9.0.cvs20020913-0
apache-1.3.26-57
argus-2.0.5-50
cvs-1.11.1p1-235
eel-1.0.2-509
capi4linux-2002.11.11-0
evlog-1.5.3-83
cups-client-1.1.15-132
fbset-2.1-526
freeradius-0.5-332
gconf2-1.2.1-106
gnome-print-0.36-210
gpm-1.20.1-47
heimdal-0.4e-207
glide_v2-2.53-138
hotplug-2002_04_01-118
i4lfirm-2002.11.11-0
i4l-isdnlog-2002.11.11-0
ippl-1.4.14-31
ipvsadm-1.21-91
ipxrip-0.7-606
isapnp-1.26-235
jakarta-tomcat-4.0.4-81
iputils-ss020124-457
bootsplash-1.0-124
libglade-0.16-835
libglade2-2.0.0-232
libica-1.2-4
libmcrypt-devel-2.5.2-48
lvm-1.0.5-51
marsnwe-0.99.pl20-332
medusa-0.5.1-644
microcode_ctl-1.06-124
mon-0.99.2-51
mrt-2.2.2a-350
mysql-devel-3.23.52-106
ncpfs-2.2.0.19-42
nessus-1.2.3-93
netatalk-1.5.3.1-88
ntop-2.1.2-58
samba-vscan-0.3.2a-182
pam-devel-0.76-109
pcsc-lite-1.0.1-70
portmap-5beta-460
postfix-1.1.12-12
postgresql-perl-7.2.2-35
postgresql-tcl-7.2.2-35
ppp-2.4.1-351
parted-1.6.6-40
python-egenix-mx-base-2.0.3-56
python-mysql-0.9.1-316
python-tk-2.2.1-68
qpopper-4.0.4-132
radvd-0.7.1-146
pam-modules-2002.8.29-12
rinetd-0.61-554
rp-pppoe-3.5-48
rpm-3.0.6-418
rsync-2.5.5-104
scanlogd-2.2-342
raidtools-1.00.3-117
setserial-2.17-325
smpppd-0.78-35
star-1.4.2-2
ngpt-devel-2.2.2-7
openssl-devel-0.9.6g-100
sysvinit-2.82-364
sysstat-4.0.3-219
vtun-2.5-60
wwwoffle-2.7f-6
yast2-mouse-2.6.21-5
yast2-packagemanager-2.6.49-0
zebra-0.93b-74
bonobo-1.0.20-221
3ddiag-0.496-92
directory_administrator-1.1.9-97
attr-devel-2.4.2-55
backhand-1.2.1-168
at-3.1.8-806
cpu-1.3.13-126
aalib-1.2-698
cron-3.0.1-839
fetchmail-5.9.13-54
gq-0.6.0-79
gup-0.3-602
gv-3.5.8-729
grub-0.93-109
dhcp6-0.85-34
jserv-1.1.2-637
libbonobo-2.0.0-207
libgnomecanvas-2.0.2-112
mc-4.5.55-428
metacity-2.4.0-104
mod_dav-1.0.3-50
mod_perl-1.27-50
mkisofs-1.11.a28-78
mod_python-2.7.8-98
mod_ssl-2.8.10-57
nagios-nsca-2.1-50
net-tools-1.60-455
nss_ldap-199-53
pam_ldap-150-79
perl-SNMP-4.2.0-334
postgresql-python-7.2.2-35
python-imaging-1.1.3-58
rstatd-3.06-255
samba-2.2.8a-133
xfsprogs-devel-2.5.11-0
tftp-0.29-57
uucp-1.06.1-724
vsftpd-1.1.0-31
ngpt-2.2.2-7
xshared-4.2.0-213
ypbind-1.12-55
yast2-online-update-2.6.17-17
bind9-utils-9.2.2-73
bonobo-conf-0.14-505
bootcycle-0.2-6
gail-0.16-224
gnome-vfs2-2.0.2-107
ircd-2.10.3-432
libgnomeprint-1.115.0-229
mesasoft-4.0.3-70
libmcrypt-2.5.2-48
mutt-1.4i-217
openCryptoki-1.5-16
nfs-utils-1.0.1-129
nagios-1.0b4-110
perl-Net_SSLeay-1.18-44
xf86_glx-devel-4.2.0-188
quota-3.08-72
scsi-1.7_2.31_1.05_0.10-63
squid-2.4.STABLE7-93
w3m-inline-image-0.3.1-81
xf86_glx-4.2.0-188
xf86tools-0.1-419
xfsprogs-2.5.11-0
yast2-2.6.40-6
yast2-pam-2.6.5-64
bind9-devel-9.2.2-73
acroread-5.08-50
miplv6-0.9.5.1-11
fam-2.6.9-59
gcc-3.2.2-38
libgnome-2.0.2-108
libgnomeprintui-1.115.0-227
libgtkhtml-2.0.1-87
mailx-8.1.1-603
mesaglu-4.0.3-70
kdebase3-devel-3.0.3-122
openCryptoki-32bit-1.5-16
openssh-askpass-3.4p1-105
squidGuard-1.2.0-144
xmms-1.2.7-252
wget-1.8.2-233
w3m-0.3.1-105
yast2-packager-2.6.78-0
yast2-printer-2.6.43-23
yast2-tune-2.6.13-67
yast2-x11-2.6.14-58
yast2-xml-2.6.8-79
yast2-printerdb-2.6.10-66
yast2-security-2.6.10-85
fetchmailconf-5.9.13-49
gnome-session-2.0.5-192
libbonoboui-2.0.1-109
lsb-1.2-42
mailman-2.0.13-60
mesaglut-4.0.3-70
python-gtk-1.4.2-433
kdelibs3-cups-3.0.3-100
x3270-3.2.20-145
xpp-1.1-110
xscreensaver-4.05-150
shadow-4.0.2-365
yast2-installation-2.6.136-1
yast2-packagemanager-devel-2.6.49-0
autoyast2-installation-2.6.44-7
yast2-nfs-client-2.6.11-101
yast2-nfs-server-2.6.13-65
yast2-nis-client-2.6.15-0
CheckHardware-0.1-419
arts-1.0.3-130
libgnomeui-2.0.3-108
mesa-4.0.3-70
qt3-non-mt-3.0.5-115
vnc-3.3.3r2-504
xbanner-1.31-460
yast2-control-center-2.6.14-37
yast2-country-2.6.35-1
yast2-qt-2.6.23-42
ifnteuro-1.2-427
yast2-ldap-client-2.6.5-122
yast2-mail-2.6.17-77
attr-2.4.2-55
SDL-1.2.4-209
bug-buddy2-2.2.0-235
glade2-1.1.1-171
eel2-2.0.3-130
freetype2-devel-2.0.9-87
gnome-desktop-2.0.6-118
gnome-media2-2.0.0-262
ethereal-0.9.6-202
gnome-utils2-2.0.2-134
gtk2-themes-0.1-166
kdelibs3-3.0.3-100
metacity-setup-0.6-174
qt3-mysql-3.0.5-115
qt3-postgresql-3.0.5-115
qt3-unixODBC-3.0.5-115
ps-2003.10.7-1
wondershaper-1.1a-104
yast2-nis-server-2.6.11-96
control-center2-2.0.0-214
gnome-panel-2.0.6-111
kdebase3-konqueror-3.0.3-122
kdegraphics3-extra-3.0.3-112
iproute2-2.4.7-495
evms-1.2.1-65
kinternet-0.45-128
nautilus2-2.0.3-125
yelp-1.0.3-82
gnome-applets2-2.0.1-151
kbd-1.06-169
drbd-0.6.6-152
kdebase3-UnitedLinux-1.0-117
IBMJava2-JAAS-1.3.1-24
IBMJava2-JAVACOMM-1.3.1-24
IBMJava2-JRE-1.3.1-24
aalib-devel-1.2-434
TIVsm-API-5.1.0-1
apache-devel-1.3.26-57
atk-devel-1.0.3-66
autoconf-2.53-150
automake-1.6.3-37
bin86-0.14.9-441
bind9-9.2.2-73
bison-1.35-47
bonobo-activation-devel-1.0.2-153
bonobo-conf-devel-0.14-505
bonobo-devel-1.0.20-221
cdk-devel-4.9.10-158
curl-devel-7.9.8-54
dvd+rw-tools-5.10.4.5.4-1
db-devel-4.0.14-194
des-4.04b-518
dmapi-devel-2.0.5-33
eel-devel-1.0.2-509
eel2-devel-2.0.3-130
emacs-info-21.2-52
emacs-x11-21.2-52
esound-devel-0.2.28-69
flex-2.5.4a-48
fltk-devel-1.1.0rc5-50
freeradius-devel-0.5-236
scsirastools-1.4.3-1
gail-devel-0.16-224
gal-devel-0.19.3-155
gd-devel-1.8.4-401
gdbm-devel-1.8.0-689
gdk-pixbuf-devel-0.18.0-108
gettext-0.11.5-34
gfxboot-devel-1.9-59
glib-devel-1.2.10-326
glib2-devel-2.0.6-47
ghostscript-library-7.05.3-162
gnome-desktop-devel-2.0.6-118
gnome-panel-devel-2.0.6-111
gnome-vfs-devel-1.0.5-207
gnome-vfs2-devel-2.0.2-107
gperf-2.7.2-346
gtk2-devel-2.0.6-73
heimdal-devel-0.4e-207
horde-1.2.6-552
imap-devel-2001a-159
imlib-devel-1.9.10-499
indent-2.2.8a-40
iptables-devel-1.2.7a-53
libPropList-devel-0.10.1-371
libart_lgpl-devel-2.3.10-53
libbonobo-devel-2.0.0-207
libbonoboui-devel-2.0.1-109
libghttp-devel-1.0.9-370
libgimpprint-devel-4.3.3-42
libglade2-devel-2.0.0-232
libgnome-devel-2.0.2-108
libgnomecanvas-devel-2.0.2-112
libgnomeprint-devel-1.115.0-229
libgnomeprintui-devel-1.115.0-227
libgnomeui-devel-2.0.3-108
libgtkhtml-devel-2.0.1-87
libgtop2-devel-2.0.0-232
libidl-devel-0.8.0-87
libiodbc-devel-3.0.6-79
qt3-3.0.5-92
libmng-devel-1.0.4-48
libogg-devel-1.0-43
libpng-devel-1.2.4-41
librsvg-devel-1.0.1-672
librsvg2-devel-2.0.1-162
kdenetwork3-mail-3.0.3-114
libvorbis-devel-1.0-44
libwnck-devel-0.16-64
libxcrypt-devel-1.1-54
libxml-devel-1.8.17-104
libxml2-devel-2.4.23-117
liby2util-devel-2.6.21-1
linc-devel-0.5.2-54
kdebase3-ksysguardd-3.0.3-122
mesaglut-devel-4.0.3-70
mod_php4-core-4.2.2-287
mod_php4-devel-4.2.2-287
nautilus2-devel-2.0.3-125
ncpfs-devel-2.2.0.19-42
ncurses-devel-5.2-402
netatalk-devel-1.5.3.1-88
openmotif-devel-2.2.2-124
cdrdao-1.1.0-1
parted-devel-1.6.3-40
popt-devel-1.6-277
postgresql-devel-7.2.2-35
python-devel-2.2.1-68
recode-devel-3.6-240
rpm-devel-3.0.6-418
sablot-devel-0.82-123
slang-devel-1.4.5-53
t1lib-devel-1.3.1-120
tcl-devel-8.4-60
k3b-0.8.1-1
yacc-91.7.30-615
yast2-core-2.6.56-3
yast2-devel-2.6.40-6
yast2-bootloader-2.6.75-4
zlib-devel-1.1.4-51
IBMJava2-SDK-1.3.1-24
alsa-devel-0.9.0.cvs20020903-39
cyrus-sasl-devel-1.5.27-280
emacs-21.2-52
gtk-devel-1.2.10-463
libxslt-devel-1.0.19-125
mesaglu-devel-4.0.3-70
orbit-devel-0.5.17-65
orbit2-devel-2.4.1-48
pango-devel-1.0.4-68
SDL-devel-1.2.4-209
gconf2-devel-1.2.1-106
gnome-libs-devel-1.4.1.7-134
qt3-devel-3.0.5-92
oaf-devel-0.6.10-126
TIVsm-BA-5.1.0-1
gnome-print-devel-0.36-210
libglade-devel-0.16-835
arts-devel-1.0.3-130
kdenetwork3-3.0.3-114
kdenetwork3-devel-3.0.3-114
mhash-0.8.16-30
perl-XML-RegExp-0.03-380
powertweak-0.99.4-134
scpm-0.8-54
bootsplash-theme-UnitedLinux-1.0-71
cdrtools-1.11a39-1
inf2htm-1.1-630
kdebase3-samba-3.0.3-122
kdenetwork3-lisa-3.0.3-114
kdenetwork3-news-3.0.3-114
keramik-20020827-95
kio_fish-1.1.2-207
howtoenh-2002.9.6-6
l2h-pngicons-99.2beta8-540
yast2-backup-2.6.7-92
yast2-firewall-2.6.6-77
yast2-runlevel-2.6.16-20
yast2-theme-SuSELinux-2.6.8-0
yast2-trans-en_US-2.6.7-1
sdb-2002.9.5-2
yast2-restore-2.6.11-70
listexec-0.5-605
xdmbgrd-0.4-537
sles-release-8-7
yast2-sound-2.6.25-10
yast2-sysconfig-2.6.14-20
gnome2-SLES-0.1-24
sles-admin-x86+x86-64_en-8.1.0.2-5
kdebase3-kdm-3.0.3-122
kdenetwork3-lan-3.0.3-114
sdb_en-2002.9.5-2
susehelp-2002.09.05-25
yast2-inetd-2.6.8-12
yast2-powertweak-2.6.14-20
sles-inst-x86+x86-64_en-8.1.0.2-5
susewm-3.6.0-159
yast2-profile-manager-2.6.6-55
susehelp_en-2002.09.05-25
susewm-kcmyast-3.6.0-159
kdebase3-SLES-8-73
SuSEfirewall2-3.1-90
k_smp-2.4.21-138
yast2-users-2.6.37-7
fileutils-4.1.11-107
pam-0.76-109
perl-5.8.0-115
ypserv-2.9.91-27
yast2-storage-2.6.69-2
yast2-network-2.6.39-16
yast2-ncurses-2.6.24-19
yast2-core-devel-2.6.56-3
openssl-0.9.6g-100
xntp-4.1.1-289
xf86-4.2.0-242
util-linux-2.11u-95
ucdsnmp-4.2.5-132
timezone-2.2.5-213
sysconfig-0.23.22-66
snort-1.8.7b128-236
sax2-4.7-196
samba-client-2.2.8a-133
pptpd-1.1.2-412
postgresql-7.2.2-90
openssh-3.4p1-215
openldap2-devel-2.1.4-70
openldap2-2.1.4-86
mysql-3.23.52-106
mozilla-1.4-98
mozilla-devel-1.4-98
mod_php4-4.2.2-287
man-2.3.19deb4.0-644
libstdc++-devel-3.2.2-38
kernel-source-2.4.21-138
kdeutils3-3.0.3-118
kdelibs3-devel-3.0.3-100
inn-2.3.2-184
i4l-base-2002.11.11-0
hwinfo-devel-5.62-1
heartbeat-1.0.4-14
glibc-locale-2.2.5-213
glibc-i18ndata-2.2.5-213
glibc-devel-2.2.5-213
freeswan-1.98_0.9.14-341
dprobes-3.6.4-71
cups-drivers-stp-1.1.15-250
cups-1.1.15-132
cups-drivers-1.1.15-250
alsa-0.9.0.cvs20020913-0
usermin-1.110-1
webmin-1.180-1
ITDAgent-4.20-2
DirAgent-4.20-2
MQSeriesSDK-5.3.0-9
MQSeriesClient-5.3.0-9
ITDConsole-4.20-2
DirConsoleExt-4.20-2
MQSeriesRuntime-5.3.0-9
MQSeriesSamples-5.3.0-9
cdrtools-devel-2.01a25-1
j2sdk-1.4.2_08-fcs
kdebase3-3.0.3-122
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IO_APIC
2005-04-25 21:03 IO_APIC Kline, Larry
@ 2005-04-25 21:26 ` Randy.Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy.Dunlap @ 2005-04-25 21:26 UTC (permalink / raw
Cc: linux-smp, LKline
On Mon, 25 Apr 2005 16:03:53 -0500
"Kline, Larry" <LKline@ILSOS.NET> wrote:
> I can no longer bring X windows up on this system. I can get the red splash screen, from the wallpaper selection, to display for approx. 5 seconds, then the system defaults to a non-windows interface.
What has changed?
(it sounds like it worked previously, since you say
"no longer can bring X windows up").
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: IO_APIC
@ 2005-04-25 21:30 Kline, Larry
2005-04-25 21:39 ` IO_APIC Randy.Dunlap
0 siblings, 1 reply; 8+ messages in thread
From: Kline, Larry @ 2005-04-25 21:30 UTC (permalink / raw
To: Randy.Dunlap; +Cc: linux-smp
I added a IBM MULTIBURNER PLUS (Rambo IV) OPTION. The system found and installed three, 3, cdrom drives and seven, 7, dvd drives. I could still read and write cd's and dvd's for about two, 2, weeks, and then on a reboot - no more windows. I have unplugged the Super dvd drive, but no change. Now if I plug the Super dvd drive in I lose my cdrom drive.
-----Original Message-----
From: Randy.Dunlap [mailto:rddunlap@osdl.org]
Sent: Monday, April 25, 2005 4:26 PM
To: Kline, Larry
Cc: linux-smp@vger.kernel.org; Kline, Larry
Subject: Re: IO_APIC
On Mon, 25 Apr 2005 16:03:53 -0500
"Kline, Larry" <LKline@ILSOS.NET> wrote:
> I can no longer bring X windows up on this system. I can get the red splash screen, from the wallpaper selection, to display for approx. 5 seconds, then the system defaults to a non-windows interface.
What has changed?
(it sounds like it worked previously, since you say
"no longer can bring X windows up").
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IO_APIC
2005-04-25 21:30 IO_APIC Kline, Larry
@ 2005-04-25 21:39 ` Randy.Dunlap
0 siblings, 0 replies; 8+ messages in thread
From: Randy.Dunlap @ 2005-04-25 21:39 UTC (permalink / raw
To: Kline, Larry; +Cc: linux-smp
On Mon, 25 Apr 2005 16:30:54 -0500
"Kline, Larry" <LKline@ILSOS.NET> wrote:
> I added a IBM MULTIBURNER PLUS (Rambo IV) OPTION. The system found and installed three, 3, cdrom drives and seven, 7, dvd drives. I could still read and write cd's and dvd's for about two, 2, weeks, and then on a reboot - no more windows. I have unplugged the Super dvd drive, but no change. Now if I plug the Super dvd drive in I lose my cdrom drive.
Well, that didn't help (me) any.
And that's all that changed.... ?
<insert answer/comments/reply here, please don't top-post>
> -----Original Message-----
> From: Randy.Dunlap [mailto:rddunlap@osdl.org]
> Sent: Monday, April 25, 2005 4:26 PM
> To: Kline, Larry
> Cc: linux-smp@vger.kernel.org; Kline, Larry
> Subject: Re: IO_APIC
>
>
> On Mon, 25 Apr 2005 16:03:53 -0500
> "Kline, Larry" <LKline@ILSOS.NET> wrote:
>
> > I can no longer bring X windows up on this system. I can get the red splash screen, from the wallpaper selection, to display for approx. 5 seconds, then the system defaults to a non-windows interface.
>
> What has changed?
>
> (it sounds like it worked previously, since you say
> "no longer can bring X windows up").
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: IO_APIC
@ 2005-04-25 21:56 Kline, Larry
2005-04-26 1:30 ` IO_APIC Earle Nietzel
0 siblings, 1 reply; 8+ messages in thread
From: Kline, Larry @ 2005-04-25 21:56 UTC (permalink / raw
To: Randy.Dunlap; +Cc: linux-smp, Kline, Larry
Yes - I have tried to look at any changes, additions/deletions upgrades, that may have occurred and I cannot find anything on this system. I even looked at the kde and qt members from the original Suse 8.0 cd just to be sure I was running the original software. Everything matches. I have a CTX CPG1772E 17" monitor on this system and I have modified XF86Config to match the suggested configuration from the floppy that came with the Monitor. I try to run sax2 in level 3, init 3, and the system says that "Signal out of range 79.8 Khz 74.9 Hz. I modified the XF86Config file to match the monitor specifications that came with the monitor. No help.
-----Original Message-----
From: Randy.Dunlap [mailto:rddunlap@osdl.org]
Sent: Monday, April 25, 2005 4:40 PM
To: Kline, Larry
Cc: linux-smp@vger.kernel.org
Subject: Re: IO_APIC
On Mon, 25 Apr 2005 16:30:54 -0500
"Kline, Larry" <LKline@ILSOS.NET> wrote:
> I added a IBM MULTIBURNER PLUS (Rambo IV) OPTION. The system found and installed three, 3, cdrom drives and seven, 7, dvd drives. I could still read and write cd's and dvd's for about two, 2, weeks, and then on a reboot - no more windows. I have unplugged the Super dvd drive, but no change. Now if I plug the Super dvd drive in I lose my cdrom drive.
Well, that didn't help (me) any.
And that's all that changed.... ?
<insert answer/comments/reply here, please don't top-post>
> -----Original Message-----
> From: Randy.Dunlap [mailto:rddunlap@osdl.org]
> Sent: Monday, April 25, 2005 4:26 PM
> To: Kline, Larry
> Cc: linux-smp@vger.kernel.org; Kline, Larry
> Subject: Re: IO_APIC
>
>
> On Mon, 25 Apr 2005 16:03:53 -0500
> "Kline, Larry" <LKline@ILSOS.NET> wrote:
>
> > I can no longer bring X windows up on this system. I can get the red splash screen, from the wallpaper selection, to display for approx. 5 seconds, then the system defaults to a non-windows interface.
>
> What has changed?
>
> (it sounds like it worked previously, since you say
> "no longer can bring X windows up").
--
~Randy
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: IO_APIC
2005-04-25 21:56 IO_APIC Kline, Larry
@ 2005-04-26 1:30 ` Earle Nietzel
0 siblings, 0 replies; 8+ messages in thread
From: Earle Nietzel @ 2005-04-26 1:30 UTC (permalink / raw
To: linux-smp
Kline, Larry wrote:
>Yes - I have tried to look at any changes, additions/deletions upgrades, that may have occurred and I cannot find anything on this system. I even looked at the kde and qt members from the original Suse 8.0 cd just to be sure I was running the original software. Everything matches. I have a CTX CPG1772E 17" monitor on this system and I have modified XF86Config to match the suggested configuration from the floppy that came with the Monitor. I try to run sax2 in level 3, init 3, and the system says that "Signal out of range 79.8 Khz 74.9 Hz. I modified the XF86Config file to match the monitor specifications that came with the monitor. No help.
>
>
>
It seems like an X configuration problem especially if you can't get sax
to configure X correctly. I would suggest loading the default
/etc/X11/XF86Config file from the X rpm and then give sax a go again.
regards,
Earle
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2005-04-26 1:30 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-25 21:03 IO_APIC Kline, Larry
2005-04-25 21:26 ` IO_APIC Randy.Dunlap
-- strict thread matches above, loose matches on Subject: below --
2005-04-25 21:56 IO_APIC Kline, Larry
2005-04-26 1:30 ` IO_APIC Earle Nietzel
2005-04-25 21:30 IO_APIC Kline, Larry
2005-04-25 21:39 ` IO_APIC Randy.Dunlap
2003-07-03 18:44 io apic raptor
2003-02-07 7:57 IO APIC "Ruchatz, Jürgen"
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).