From: Andre Przywara <andre.przywara@arm.com>
To: Nick Alilovic <nickalilovic@gmail.com>
Cc: u-boot@lists.denx.de, jagan@amarulasolutions.com,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support
Date: Mon, 29 Jan 2024 16:38:24 +0000 [thread overview]
Message-ID: <20240129163824.6cf5804e@donnerap.manchester.arm.com> (raw)
In-Reply-To: <20240118175655.1c8922a2@donnerap.manchester.arm.com>
On Thu, 18 Jan 2024 17:56:55 +0000
Andre Przywara <andre.przywara@arm.com> wrote:
> On Thu, 18 Jan 2024 11:45:08 -0500
> Nick Alilovic <nickalilovic@gmail.com> wrote:
>
> Hi Nick,
>
> > This is a Chinese TV box based on Allwinner H618 SoC.
> >
> > The DRAM parameters were derived from the values found in a firmware update.
> >
> > Signed-off-by: Nick Alilovic <nickalilovic@gmail.com>
>
> Thanks for the fixes, looks good now:
>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
>
> I will queue this after the DT files have been merged.
Merged into sunxi/master.
Thanks!
Andre
> > ---
> > This defconfig relies on the synced sun50i-h618-transpeed-8k618-t.dts file.
> >
> > configs/transpeed-8k618-t_defconfig | 27 +++++++++++++++++++++++++++
> > 1 file changed, 27 insertions(+)
> > create mode 100644 configs/transpeed-8k618-t_defconfig
> >
> > diff --git a/configs/transpeed-8k618-t_defconfig b/configs/transpeed-8k618-t_defconfig
> > new file mode 100644
> > index 0000000000..020d3974af
> > --- /dev/null
> > +++ b/configs/transpeed-8k618-t_defconfig
> > @@ -0,0 +1,27 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_SUNXI=y
> > +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-transpeed-8k618-t"
> > +CONFIG_SPL=y
> > +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303
> > +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
> > +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1f12
> > +CONFIG_DRAM_SUN50I_H616_TPR0=0xc0001002
> > +CONFIG_DRAM_SUN50I_H616_TPR10=0x2f1107
> > +CONFIG_DRAM_SUN50I_H616_TPR11=0xddddcccc
> > +CONFIG_DRAM_SUN50I_H616_TPR12=0xeddc7665
> > +CONFIG_MACH_SUN50I_H616=y
> > +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
> > +CONFIG_DRAM_CLK=648
> > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > +CONFIG_R_I2C_ENABLE=y
> > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > +CONFIG_SPL_I2C=y
> > +CONFIG_SPL_SYS_I2C_LEGACY=y
> > +CONFIG_SYS_I2C_MVTWSI=y
> > +CONFIG_SYS_I2C_SLAVE=0x7f
> > +CONFIG_SYS_I2C_SPEED=400000
> > +CONFIG_SUPPORT_EMMC_BOOT=y
> > +CONFIG_AXP313_POWER=y
> > +CONFIG_AXP_DCDC3_VOLT=1360
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_OHCI_HCD=y
>
>
prev parent reply other threads:[~2024-01-29 16:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 16:45 [PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support Nick Alilovic
2024-01-18 17:56 ` Andre Przywara
2024-01-29 16:38 ` Andre Przywara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240129163824.6cf5804e@donnerap.manchester.arm.com \
--to=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=nickalilovic@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).